External power supply 5v dc

Alimentatore SAD231M045-1M0 power supply 100-240V AC 50/60Hz / 4.5V DC 50A 225W per TV LED SM06RD. Dimensioni: 283x56x30 mm A richiesta, disponibili altri pezzi.

EURO 120,00 SPEDIZIONE INCLUSA. Radiomicrofono WORK PRO UHF WRD 1100 AF/1 assolutamente nuovo, mai usato ancora imballato disponibile per essere visionato e provato. Sono a disposizione, non esitate a contattarmi rispondendo direttamente alla e-mail solo se veramente interessati. Non sono interessato a scambi o permute di materiale. Grazie. CARATTERISTICHE: WRD 1100 AF System: AFS single channel Diversity. Frequency Band: UHF. Number of channels: 99 selectable channels. Dynamic Range:> 95 dB. Output Level: 400 mV (Balanced), 400 mV (unbalanced). S / N:> 95 dB. De-Emphasis: 50 uS. Power supply: 15-17V DC (External power supply included). Dimensions: 210 x 170 x 44 mm. Weight: 700 g. WM 1100 AF Transmission power: 30mW. Modulation Type: FM. Deviation: 40 kHz. Spurious Emissions:> 60 dB. Power supply: 3V (2 x 1.5V AA batteries). Dimensions: 250 x 30 mm. Weight: 200 g.

EURO 89,00 SPEDIZIONE INCLUSA. Radiomicrofono WORK PRO UHF WRD 1100 AF/1 assolutamente nuovo, mai usato ancora imballato disponibile per essere visionato e provato. Sono a disposizione, non esitate a contattarmi rispondendo direttamente alla e-mail solo se veramente interessati. Non sono interessato a scambi o permute di materiale. Grazie. CARATTERISTICHE: WRD 1100 AFʉ۬System: AFS single channel Diversity.
Frequency Band: UHF.
Number of channels: 99 selectable channels.
Dynamic Range:> 95 dB.
Output Level: 400 mV (Balanced), 400 mV (unbalanced).
S / N:> 95 dB.
De-Emphasis: 50 uS.
Power supply: 15-17V DC (External power supply included).
Dimensions: 210 x 170 x 44 mm.
Weight: 700 g.
WM 1100 AFʉ۬Transmission power: 30mW.ʉ۬Modulation Type: FM.ʉ۬Deviation: 40 kHz.ʉ۬Spurious Emissions:> 60 dB.ʉ۬Power supply: 3V (2 x 1.5V AA batteries).ʉ۬Dimensions: 250 x 30 mm.ʉ۬Weight: 200 g.

Thanks to universal cold shoe type mount it can be fixed on any camera and camcorder. Genesis LED 170 mount is also equipped with 1/4 " thread so it can be easily attache to tripods, camera rigs, brackets and magic arms. Genesis LED 170 may be powered by eight AA batteries or a Sony NP-F970 battery (batteries are not included).There is also a socket for an AC external power supply (available separately). Light intensity can be adjusted smoothly by using dial, positioned on the rear panel of the lamp. Genesis LED 170 is supplied with two diffusion screens: white (neutral) and yellow (warm), which can change easily and quickly according to the needs. Panel position can be adjust in the vertical axis through two joints. Features: 170 LED light panel lightweight and compact low power consumption and high efficiency smooth power regulation adjustable panel position standard cold shoe mount Kit includes: Genesis LED 170 panel warm diffuser white (neutral) diffuser instruction manual Specification: Number of LEDs: 170 Battery: 8xAA DC power supply: 6~12V Power (Max): 2700Lux (0.5m) Dedicated battery: Sony NP-F970 Color temperature: 5500~6500K Brightness control: smooth Battery life: approx. 1h (AA batteries) Diffusers: neutral, warm Operation temperature: -10~55C Dimensions: 172/108,6/42.5mm Net weight: 350g

Vendo CAYIN N5 MK2 (DAP) Digital Audio Player in ottimo stato.LCD Touch Screen Apparecchio sofisticato che dispone di moltissime funzioni. Suono dettagliato ed interessante.Leggete in rete le recensioni Segnalo che ho anche in vendita su questo stesso portale un bellissimo Fiio E12 Mont Blanc Amplificatore cuffie (venivano usati assieme) etc. Se presi in coppia il totale è di euro 300,00. Singolarmente: 1-CAYIN N5 MK2 (DAP) Wi-Fi euro 230,00 2-Fiio E 12 Mont Blanc euro 90,00 Info tecniche CAYIN N5 MK2 (DAP): LCD Touch Screen (vetro temperato per protezione). Impedenza raccomandata cuffie (> di 10): 16 Ohm - 300 Ohm TF Card Slot 1 e 2 Up To 400 Gb.La card viene riconosciuta in automatico. Memoria Interna (32 GB). OTG Storage (for external storage device). Uscita cuffia anche bilanciata jack 2,5 mm/uscita cuffia normale jack 3,5 mm SPIDIF OUT con apposito cavo via USB in vendita separatamente.(speciale cavo USB Type C to Coaxial). Power Supply (Adapter) DC 5V, > 500mA (2A è raccomandato).Si carica anche con PC/MAC via USB (cavo a corredo). USB cavo Type C con funzione DAC, data transfer con driver per Windows e senza nulla per Apple OSX (non supporta iOS e Android). Connessione Wi-Fi (non supporta 2.484 Ghz canale 14) e Bluetooth Equalizzatore interno Applicazioni di terze parti supportate esempio: Play Store, Spotify, TIDAL, Play Music. Risposta in frequenza 20 Hz-20 Khz Signal noise ratio > 116db(A) Formati Musicali (Local Storage): DSF/DSD/SACD-ISO (64/128)-FLAC-ALAC-AIFF-APE-WMA-WMA LOSSLESS-MP2/MP3-AAC-OGG Potenza di uscita: 250 mW (32 Ohm) Durata batteria con volume normale: 11 ore Durata carica della batteria: 3,5 ore (2A) Pagamento via bonifico bancario o con PayPal, ma con commissioni a Vostro carico. Posso spedire su richiesta con Poste Italiane Paccocelere 1 o 3 (uguale a dire SDA), con assicurazione di pari importo se richiesta o consegna a mano.

Vendo Fiio E12 Mont Blanc Amplificatore cuffie in più che buone condizioni (scatola originale, leggermente rovinata è molto stretta di suo). Lapparecchio può essere abbinato solo al vostro cellulare per avere più volume e dettagli con più bassi. Oppure potete anche aggiungere alla catena un DAP e quindi usarli tutti e due contemporaneamente etc. (lettore di rete e file nei vari formati conosciuti) etc. Segnalo che ho anche in vendita su questo stesso portale un bellissimo CAYIN N5 MK2 (DAP) (venivano usati assieme) etc. Se presi in coppia il totale è di euro 300,00. Singolarmente Fiio E 12 Mont Blanc euro 90,00 / CAYIN N5 MK2 (DAP) Wi-Fi euro 230,00 Info tecniche Fiio E 12 Mont Blanc: Impedenza raccomandata cuffie: 16 Ohm - 300 Ohm Power Supply (Adapter) DC 5V, > 500mA (2A è raccomandato). Risposta in frequenza 20 Hz-20 Khz Signal noise ratio > 110db(A) Crosstalk Attenuation >65db Potenza di uscita: 600 mW (16 Ohm) - 880mW (32 Ohm) - 160mW (300 Ohm). Gain 0db/16db Cross Feed ON/OFF Bass ON/OFF Durata batteria con volume normale: 12 ore Durata carica della batteria 5 Kohm Custodia per sua protezione a corredo. Pagamento via bonifico bancario o con PayPal, ma con commissioni a Vostro carico. Posso spedire su richiesta con Poste Italiane Paccocelere 1 o 3 (uguale a dire SDA), con assicurazione di pari importo se richiesta o consegna a mano. NON PRATICO SCONTI FOLLI E NON SCAMBIO CON NULLA. DEVO REALIZZARE. NO A PERDITEMPO, AFFARISTI etc GRAZIE;) Max 339-2543211

VENDO APPARATO KENWOOD TS 830 M CARATTERISTICHE: SPECIFICATIONS GENERAL Type: Amateur HF transceiver Frequency range: 10-160 m + WARC 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.3 MHz 10.0 MHz (WWV) 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-29.7 MHz Tuning steps: Continuous Mode: AM/SSB/CW Channels/memory management: No Repeater shift/offset: No Power supply: Mains: 120 / 220 VAC Current drain/power consumption: RX: 32 W (heaters off) TX: Max 295 W Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 333*133*333 mm (13.3*5.3*13.3") Weight: 13.5 Kg (29.8 lbs) Other features: VOX, 25 KHz calibrator, NB, IF-shift, VBT (Variable Bandwidth Tuning), IF-output, Tone control RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 8.83 MHz 2nd IF: 455 KHz Sensitivity: AM: 2 uV (10 dB S+N/N) SSB/CW: 0.25 uV (10 dB S+N/N) Selectivity: AM: 6 KHz (-6 dB), 11 KHz (-60 dB) SSB/CW Wide: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB) below Image rejection: 60 dB AF output power/speaker: 1.5 W at ?% distortion / 8 ohms External speaker connector: 8-16 ohms, 3.5 mm TRANSMITTER SECTION RF output power: AM: ~50 W DC (80 W DC input) SSB: ~100 W PEP (220 W PEP input) CW: ~100 W DC (180 W DC input) Modulation system: Max FM deviation: No FM Spurious emissions: Less than -60 dB Microphone impedance/connector: 500 ohms to 50 Kohm / 4-pin MISCELLANEOUS Manufactured: Japan, 1980-1988 (Discontinued) Additional info: Tube hybrid: One 12BY7A driver and two 6146B finals Related documents: Service manual (13 MB) 6146B power tube Modifications: Options/Accessories: AT-230 HC-10 HS-4 HS-5 KB-1 MC-30S MC-35S MC-50 PC-1 SM-220 SP-230 VFO-230 VFO-240 Manual antenna tuner Digital world clock Communications headphones, 8 ohms Deluxe headphone set, 8 ohms Deluxe flywheel VFO tuning knob Noise cancelling hand microphone, 500 ohms Noise cancelling hand microphone, 50 Kohm Desk microphone, 500 ohms/50 Kohm switchable Phone patch with VU-meter Station monitor External speaker with audio filters Remote digital VFO, 20 Hz step and 5 memories Remote VFO

VENDO APPARATO KENWOOD TS 830 M CARATTERISTICHE: SPECIFICATIONS GENERAL Type: Amateur HF transceiver Frequency range: 10-160 m + WARC 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.3 MHz 10.0 MHz (WWV) 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-29.7 MHz Tuning steps: Continuous Mode: AM/SSB/CW Channels/memory management: No Repeater shift/offset: No Power supply: Mains: 120 / 220 VAC Current drain/power consumption: RX: 32 W (heaters off) TX: Max 295 W Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 333*133*333 mm (13.3*5.3*13.3") Weight: 13.5 Kg (29.8 lbs) Other features: VOX, 25 KHz calibrator, NB, IF-shift, VBT (Variable Bandwidth Tuning), IF-output, Tone control RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 8.83 MHz 2nd IF: 455 KHz Sensitivity: AM: 2 uV (10 dB S+N/N) SSB/CW: 0.25 uV (10 dB S+N/N) Selectivity: AM: 6 KHz (-6 dB), 11 KHz (-60 dB) SSB/CW Wide: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB) below Image rejection: 60 dB AF output power/speaker: 1.5 W at ?% distortion / 8 ohms External speaker connector: 8-16 ohms, 3.5 mm TRANSMITTER SECTION RF output power: AM: ~50 W DC (80 W DC input) SSB: ~100 W PEP (220 W PEP input) CW: ~100 W DC (180 W DC input) Modulation system: Max FM deviation: No FM Spurious emissions: Less than -60 dB Microphone impedance/connector: 500 ohms to 50 Kohm / 4-pin CHIAMARE SE VERAMENTE INTERESSATI ASTENERSI DA PROPOSTE ASSURDE. INFO: 338/8520912 Euro: 650,00 Vige la clausola Come visto e piaciuto nello stato in cui si trova

VENDO APPARATO KENWOOD TS 830 M CARATTERISTICHE: SPECIFICATIONS GENERAL Type: Amateur HF transceiver Frequency range: 10-160 m + WARC 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.3 MHz 10.0 MHz (WWV) 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-29.7 MHz Tuning steps: Continuous Mode: AM/SSB/CW Channels/memory management: No Repeater shift/offset: No Power supply: Mains: 120 / 220 VAC Current drain/power consumption: RX: 32 W (heaters off) TX: Max 295 W Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 333*133*333 mm (13.3*5.3*13.3") Weight: 13.5 Kg (29.8 lbs) Other features: VOX, 25 KHz calibrator, NB, IF-shift, VBT (Variable Bandwidth Tuning), IF-output, Tone control RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 8.83 MHz 2nd IF: 455 KHz Sensitivity: AM: 2 uV (10 dB S+N/N) SSB/CW: 0.25 uV (10 dB S+N/N) Selectivity: AM: 6 KHz (-6 dB), 11 KHz (-60 dB) SSB/CW Wide: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB) below Image rejection: 60 dB AF output power/speaker: 1.5 W at ?% distortion / 8 ohms External speaker connector: 8-16 ohms, 3.5 mm TRANSMITTER SECTION RF output power: AM: ~50 W DC (80 W DC input) SSB: ~100 W PEP (220 W PEP input) CW: ~100 W DC (180 W DC input) Modulation system: Max FM deviation: No FM Spurious emissions: Less than -60 dB Microphone impedance/connector: 500 ohms to 50 Kohm / 4-pin CHIAMARE SE VERAMENTE INTERESSATI ASTENERSI DA PROPOSTE ASSURDE. INFO: 338/8520912 Euro: 600,00 Vige la clausola Come visto e piaciuto nello stato in cui si trova

Roland TR8 Rythm Controller TR-8 è un drum machine che fonde le inconfondibili sonorità di TR-808 e TR-909 con tutte le comodità odierne. I suoni caratteristici, i classici effetti e i controlli intuitivi. A tutti gli effetti una TR! L'essenza dell'originale Riproduzione competa delle classiche TR-808 e Tr-909, basata sui progetti originale e sull'analisi della circuiteria effettivamente usata sulle macchine originali. La nuova tecnologia Analog Circuit Behavior permette di ricreare il suono e il comportamento di ogni singolo elemento,incluse le più piccole variazioni di tono che si verificavano al muoversi dei vari controlli. Massima attenzione ai dettagli, come la riproduzione delle variazioni di tono quando più strumenti sono inseriti in step accentati Step sequencer con TR-behavior, inclusi i pattern A e B e la possibilità di suonare e registrare in realtime. TR Evoluzione 16 kit composti da 11 strumenti, inclusi alcuni kit misti, che usano suoni della TR­808 e della TR­909 Comodissima manopola del tempo, tasto "Tap" e knob di "Fine" e "Shuffle" Knob dedicato all'intensità dell'accent Riverbero e delay su step, con controllo dedicato Ingresso external IN con funzioni automatiche di gate e duck, per ottimizzare il collegamento con TB­3 Display LED a 7 segmenti e 4 caratteri e 16 pad con illuminazione colorata Creazione dei pattern in realtime, fino a 32 step Rullate realtime (ottavi, sedicesimi, VARI1 e VARI2) Copia e randomization dei pattern, per il massimo della creatività Due uscite analogiche assegnabili e uscite parallele via USB, per una flessibilità totale Su TR­8 ogni controllo è solido e preciso, con un fader individuale per ogni strumento. I tasti e gli knobs sono illuminati in RGB, garantendo comodità e colpo d'occhio. Creare i pattern è semplice e divertente, grazie all'evoluzione del metodo TR­REC, quello originariamente pensato per TR­808 e poi divenuto uno standard. Il nuovo metodo TR­ REC supera però l'originale, permettendovi di passare in un secondo dalla programmazione al realtime play. Lo Scatter è una funzione unica che offre la possibilità di variare i propri pattern in un modo completamente nuovo e completamente realtime. Si può invertire, interrompere, bloccare, ripetere fino a livelli estremi, il tutto in perfetto sync. Scegliete tra 10 diversi tipi di scatter, e dosate l'intensità dell'effetto, grazie alla comoda dial. Passate da un tipo di Scatter all'altro in un istante, e inserite o disattivate l'effetto in qualsiasi momento. TR­8, moderna e accattivante, è progettata per lavorare perfettamente con gli altri prodotti della serie AIRA. Inoltre, potrete collegare TR­8 al vostro computer per trasmettere i dati audio e MIDI, incluso il MIDI Clock per mettere in sync dispositivi esterni e le altre unità AIRA. Funzioni aggiuntive Versione 1.10 BACKUP AND RESTORE Salvataggio e caricamento dei kit e dei pattern su USB SUONABILITÀ MIGLIORATA Personalizzazione dei kit regolando il gain di ciascuno strumento per personalizzare lo stile Funzione roll migliorata, più semplice, controllabile e migliore Scatter latch on/off Lo scatter si disattiva automaticamente dopo un ciclo Sync reset, per entrare subito nel groove iniziando un pattern dall'inizio EDITING MIGLIORATO Funzione "lock" per bloccare l'impostazione di un pattern e poterlo modificare senza perdere le impostazioni originali Modifica delle parti A o B di un pattern senza bisogno di stoppare il sequencer MIDI MIGLIORATO Funzioni Local ON/OFF e Controller per impostare il modo in cui sono gestiti i dati MIDI Velocity MIDI legata all'impostazione dell'Accent Selezione dei Kit attraverso i MIDI Control Change Scatter completamente controllabile via MIDI Registrazioni dei pattern in real time da dispositivi MIDI esterni Disattivazione di tutti i messaggi MIDI in uscita Ignore Play/Stop, segnele se TR-8 deve oppure no rispondere ai messaggi PLAY e STOP Controllo degli effetti attraverso i messaggi di MIDI Control Change Specifiche User Drum Kits:16 User Patterns: 16 Steps per 1 measure: 1 - 16 steps x 2 (Variation A/B) Tempo: 40 - 300 Instruments & Controls: BASS DRUM: LEVEL, TUNE, ATTACK, COMP, DECAY, INST SELECT SNARE DRUM: LEVEL, TUNE, SNAPPY, COMP, DECAY, INST SELECT LOW TOM, MID TOM, HIGH TOM, RIM SHOT, HAND CLAP, CLOSED HIHAT, OPEN HIHAT, CRASH CYMBAL, RIDE CYMBAL: LEVEL, TUNE, DECAY, INST SELECT Effects and Controls: ACCENT: LEVEL, STEP REVERB: LEVEL, TIME, GATE, STEP DELAY: LEVEL, TIME, FEEDBACK, STEP EXTERNAL IN: LEVEL, SIDE CHAIN, STEP Mode: TR-REC, PATTERN SELECT, INST PLAY, INST REC, DRUM KIT SEL, DRUM INST SEL Controllers VOLUME knob SCATTER knob TEMPO knob FINE knob SHUFFLE knob PADS: 16 MODE buttons: 6 CLEAR button VARIATION buttons: A, B SCALE button LAST STEP button START/STOP button SCATTER ON button SCATTER DEPTH button TAP button Power Switch (Rear) Display: 7 segments, 4 characters (LED) Effects: REVERB, DELAY, SIDE CHAIN Scatter: Types 10 Nominal Input Level: -10 dBu Input Impedance: 100 k ohms Nominal Output Level-10/+4 dBu (Selectable) Output Impedance: MIX OUT, ASSIGNABLE OUT: 1 k ohm PHONES: 130 ohms Connectors PHONES jack: 1/4-inch stereo phone type MIX OUT (L/MONO, R) jacks: 1/4-inch phone type ASSIGNABLE OUT (A, B) jacks: 1/4-inch phone type EXTERNAL IN (L, R) jacks: 1/4-inch phone type USB port: USB type B (Audio, MIDI) DC IN jack USB: Audio, MIDI Power Supply: AC adaptor Current Draw: 1,000 mA Accessories: Owner's manual Leaflet "USING THE UNIT SAFELY" AC adaptor Dimensioni Largo,Prof., Alto (W/D/H): 400mm/260mm/65mm Peso: 1.9kg

Android Box Beelink GT1 16GB (espandibile mediante slot Micro-SD) Android Box da collegare al monitor o al televisore mediante cavo HDMI (incluso) Completo di scatola e telecomando. In condizioni perfette (come nuovo). Supporta le applicazioni KODI, Netflix, Infinity, Timvision ed in generale tutte quelle che si possono installare su Android 6. Si collega alla rete tramite cavo ethernet oppure Wi-Fi. Specifications: CPU: Amlogic S912 2.0GHz,Octa Core GPU: ARM Mali-T820MP3 RAM: 2 GB RAM Type: DDR3 ROM: 16G (Expandable) Max. Extended Capacity: 32G Maximum External Hard Drives Capacity: 500GB Decoder Format: AVS,H.264/AVC,H.265,RealVideo8/9/10 Video format: 1080P,4K x 2K,AVI,AVS,DAT,H.265,ISO,MKV,MP4,MPEG,MPEG-1,MPEG-4,RM,VC-1,VP9-10 Profile-2,WMV Audio format: AAC,FLAC,MP3,OGG,RM,WMA Photo Format: JPEG,JPG WIFI: 802.11 a/b/g/n/ac Bluetooth: Bluetooth4.0 Power Supply: Charge Adapter Interface: DC 5V,HDMI,Micro SD Card Slot,RJ45,SPDIF,USB2.0 Product size (L x W x H): 9.60 x 9.60 x 1.60 cm

Roland Rubix22 Interfaccia Audio USB Interfaccia ad Alta Risoluzione 2-IN/2-OUT, per MAC, PC e IPAD Rubix22 ha un suono pulito e dettagliato, con preamplificatori microfonici trasparenti a basso rumore, e supporta risoluzioni audio sino a 24-bit/192kHz. È costruita in robusto metallo, e molti sforzi sono stati dedicati al suo design compatto, a basso rumore. I due preamplificatori microfonici della Rubix22 sono stati progettati per garantire basso rumore e alta definizione. Suonano puliti e trasparenti, con una grande riserva dinamica per catturare tutto l'impatto e il dettaglio di ogni vostra registrazione. E le flessibili prese combo vi permettono di collegare un'ampia varietà di sorgenti senza la necessità di adattatori o di cavi speciali. Rubix22 è ultra-portatile e ultra-flessibile. Ha driver a bassa latenza class compliant (non richiede driver aggiuntivi) per Mac e PC, perciò offre un funzionamento semplice con prestazioni audio affidabili e senza inconvenienti. Supporta anche gli iPad, per costruire un sistema estremamente compatto per la registrazione sul posto, la produzione in movimento, o le performance live. Include anche Ableton Live Lite, un potente software per la produzione in studio e le live performance che funziona perfettamente con Rubix22, già un istante dopo averla estratta dall'imballo. Interfaccia audio USB 2-in/2-out 2 preamplificatori microfonici a basso rumore con prese XLR combo Ingresso Hi-Z per la chitarra e altre sorgenti ad alta impedenza Porte MIDI In/Out Elevata schermatura, design a basso rumore Costruzione metallica, robusta e compatta Grandi indicatori facili da leggere mostrano le informazioni vitali Bassa latenza, driver class compliant Ground lift per il funzionamento più silenzioso in una varietà di installazioni Include Ableton Live Lite Specifiche System Number of Audio Record/Playback Channels Record: 2 channels Playback: 2 channels Signal Processing PC interface: 24 bits AD/DA conversion: 24 bits Sampling Frequency AD/DA conversion: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz Interface Hi-Speed USB MIDI IN, OUT Connectors INPUT (1L, 2R) connectors: XLR type (balanced, phantom power: +48 V, 6 mA Max *1) INPUT (1L, 2R) jacks *2: 1/4-inch TRS phone type (balanced) PHONES jack: Stereo 1/4-inch phone type OUTPUT (1L, 2R) jacks: 1/4-inch TRS phone type (impedance balanced) MIDI (IN, OUT) connectors USB port: USB Type B DC 5V port: USB Type micro B *1 Current value per channel. *2 INPUT 1L supports high impedance Controllers SENS 1L, 2R knobs Hi-Z switch 48V switch OUTPUT knob PHONES knob POWER SOURCE switch DIRECT MONITOR switch GROUND LIFT switch Indicator Level indicators (1L, 2R) POWER indicator Hi-Z indicator 48V indicator Caratteristiche Nominal Input Level INPUT (1L, 2R) connectors (XLR type): -60- -12 dBu INPUT (1L, 2R) jacks (1/4-inch TRS phone type): -44-+4 dBu Maximum Input Level INPUT (1L, 2R) connectors (XLR type): +2 dBu INPUT (1L, 2R) jacks (1/4-inch TRS phone type): +18 dBu Nominal Output Level OUTPUT (1L, 2R) jacks: -6 dBu (impedance balanced) Maximum Output Level OUTPUT (1L, 2R) jacks: +8 dBu (impedance balanced) PHONES Maximum Output Power 20 mW + 20 mW (L + R, 47 ohms load) Headroom: 14 dB Input Impedance INPUT (1L, 2R) connectors (XLR type): 4 k ohms or greater (balanced) INPUT (1L, 2R) jacks (1/4-inch TRS phone type): 15 k ohms or greater (balanced) INPUT (1L) jack (1/4-inch phone type *3): 500 k ohms or greater *3 When the Hi-Z is turned on Output Impedance OUTPUT (1L, 2R) jacks: 2 k ohms (balanced) PHONES jack: 47 ohms Residual Noise Level INPUT (1L, 2R) -> OUTPUT (1L, 2R): -94 dBu typ. (SENS 1L, SENS 2R knobs: min., input terminated with 600 ohms, IHF-A, typ.) Dynamic Range AD block INPUT (1L, 2R) jacks: 104 dB typ. (SENS 1L, SENS 2R knobs: min.) DA block OUTPUT (1L, 2R) jacks: 109 dB typ. Altro Power Supply Supplied from the computer via USB, DC 5V Current Draw500 mA Operating System Microsoft(R) Windows(R) 7, Windows(R) 8, Windows(R) 8.1, Windows(R) 10 Apple Mac OS X 10.10 or later Apple iOS 9 or later Dimensioni: 145 (W) x 165 (D) x 46 (H) mm Peso: 1.0 kg Accssori: Setup Guide Leaflet "USING THE UNIT SAFELY" USB cable Ableton Live Lite Serial Number Card * 0 dBu = 0.775 Vrms

DI Plus Read user experiences here. "The ULTRASOUND DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after our famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power. (Originally called ULTRA PDI.) INSTRUMENT INPUT: This input is designed for all passive and active type pickup signals. When a plug is inserted, the 9V battery is switched on. INSTRUMENT OUTPUT: This is a "parallel" jack which can be used to send the "guitar/instrument signal" to an external tuner, guitar amp or other device which can use an instrument level signal. EFX LOOP: This is a real world "EFX LOOP". In an effort to save room, most of our competition uses a TRS jack (tip, ring, sleeve) and Y cable type system. The DI+ is provided with two 1/4" jacks, one for "SEND" and one for "RETURN". Since the EFX LOOP interrupts the signal path it can be used as an insert point for a volume pedal, compressor, or tuner, if the tuner is equipped with a bypass switch. (Try that with one of our competitors units) SEND: The signal on the SEND jack is post-input gain and pre EQ. This means that you can use the SEND signal as an auxiliary unbalanced direct output. This signal is not affected by any of the panel controls with exception of the "INPUT GAIN" control. RETURN: A plug inserted into the RETURN jack will interrupt the signal path. The signal on the tip of the plug inserted into the RETURN jack will be the signal that the DI Plus will process. INPUT GAIN: The "INPUT GAIN" is not a volume control, rather this control sets the level of amplification applied to the input signal to boost it to a useable level. The reason this is adjustable is to accommodate a wide range of pickup devices. BASS: This is an "Active" control. The BASS control adjusts the amount of cut or boost in the low frequency (150HZ) range. TREBLE: This is an "Active" control. The TREBLE control adjusts the amount of cut or boost in the high frequency (5kHZ) range. NOTCH FILTER: ON/OFF - Enables or disables the NOTCH FILTER control. FREQ. HZ - Sets the frequency (100-350HZ) of the 18db cut NOTCH FILTER that is used to control resonant feedback. SHAPE: ON/OFF - This toggle switch enables or disables the SHAPE control. This control is a mid dip control. In the ON position, the mid frequencies will be cut and the high and low frequencies will be boosted. PHASE: IN/OUT - Changes the polarity of the signal. Phase affects the way the guitar top is pressurized by the loudspeakers. When the signals are out of phase with each other, low-end feedback is minimized. If you experience ⤽positive acoustic⤝ feedback on stage, flip the phase switch from its current setting to see if this will kill the feedback. If inverting phase alone does not eliminate feedback, the notch filter can be used. Phase will also affect the way the guitar signal mixes live and when recording. XLR LEVEL: This control adjusts the amount of signal sent to the XLR OUT jack. LINE LEVEL: This control adjusts the amount of signal sent to the LINE OUT jack. 48V: (Phantom Power) This LED lights when there is 48V Phantom Power present on the XLR OUT jack. No battery drain will occur when Phantom Power is present. POWER: This LED indicates the DI PLUS is ready to operate. The POWER LED will illuminate when: A. A plug is inserted into the INPUT jack and there is a fresh battery installed in the DI PLUS. B. A 9VDC adapter (Wall Wart) is plugged into the power jack. (9VDC Regulated Power Supply - 500mA) (2.1MM DC Power Plug, Center +) C. There is 48V phantom power on the XLR cable plugged into the XLR OUT jack. (The 48V LED and the POWER LED will both be illuminated.) XLR OUT: Plug a standard XLR cable from your PA or recording console into this low impedance balanced output. Use the "XLR LEVEL" control to set the output level which matches up best with your PA or recording gear and gives you the least amount of noise. If your board provides 48V phantom power on the XLR cables, the DI Plus will run from this and save the battery. It is suggested that you keep a battery in the unit as a backup when using the phantom power. If the phantom power drops, the DI Plus will automatically switch to battery power. LINE OUT: This is a standard unbalanced line level output signal. Use the "LINE LEVEL" control to adjust the signal level on this jack. This output can be used simultaneously with the XLR OUT jack for some creative signal routing. Plug a standard instrument cable from this output to a stage monitor amp or unbalanced Mic input on a mixer.

DI Plus Read user experiences here. "The ULTRASOUND DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after our famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power. (Originally called ULTRA PDI.) INSTRUMENT INPUT: This input is designed for all passive and active type pickup signals. When a plug is inserted, the 9V battery is switched on. INSTRUMENT OUTPUT: This is a "parallel" jack which can be used to send the "guitar/instrument signal" to an external tuner, guitar amp or other device which can use an instrument level signal. EFX LOOP: This is a real world "EFX LOOP". In an effort to save room, most of our competition uses a TRS jack (tip, ring, sleeve) and Y cable type system. The DI+ is provided with two 1/4" jacks, one for "SEND" and one for "RETURN". Since the EFX LOOP interrupts the signal path it can be used as an insert point for a volume pedal, compressor, or tuner, if the tuner is equipped with a bypass switch. (Try that with one of our competitors units) SEND: The signal on the SEND jack is post-input gain and pre EQ. This means that you can use the SEND signal as an auxiliary unbalanced direct output. This signal is not affected by any of the panel controls with exception of the "INPUT GAIN" control. RETURN: A plug inserted into the RETURN jack will interrupt the signal path. The signal on the tip of the plug inserted into the RETURN jack will be the signal that the DI Plus will process. INPUT GAIN: The "INPUT GAIN" is not a volume control, rather this control sets the level of amplification applied to the input signal to boost it to a useable level. The reason this is adjustable is to accommodate a wide range of pickup devices. BASS: This is an "Active" control. The BASS control adjusts the amount of cut or boost in the low frequency (150HZ) range. TREBLE: This is an "Active" control. The TREBLE control adjusts the amount of cut or boost in the high frequency (5kHZ) range. NOTCH FILTER: ON/OFF - Enables or disables the NOTCH FILTER control. FREQ. HZ - Sets the frequency (100-350HZ) of the 18db cut NOTCH FILTER that is used to control resonant feedback. SHAPE: ON/OFF - This toggle switch enables or disables the SHAPE control. This control is a mid dip control. In the ON position, the mid frequencies will be cut and the high and low frequencies will be boosted. PHASE: IN/OUT - Changes the polarity of the signal. Phase affects the way the guitar top is pressurized by the loudspeakers. When the signals are out of phase with each other, low-end feedback is minimized. If you experience “positive acoustic” feedback on stage, flip the phase switch from its current setting to see if this will kill the feedback. If inverting phase alone does not eliminate feedback, the notch filter can be used. Phase will also affect the way the guitar signal mixes live and when recording. XLR LEVEL: This control adjusts the amount of signal sent to the XLR OUT jack. LINE LEVEL: This control adjusts the amount of signal sent to the LINE OUT jack. 48V: (Phantom Power) This LED lights when there is 48V Phantom Power present on the XLR OUT jack. No battery drain will occur when Phantom Power is present. POWER: This LED indicates the DI PLUS is ready to operate. The POWER LED will illuminate when: A. A plug is inserted into the INPUT jack and there is a fresh battery installed in the DI PLUS. B. A 9VDC adapter (Wall Wart) is plugged into the power jack. (9VDC Regulated Power Supply - 500mA) (2.1MM DC Power Plug, Center +) C. There is 48V phantom power on the XLR cable plugged into the XLR OUT jack. (The 48V LED and the POWER LED will both be illuminated.) XLR OUT: Plug a standard XLR cable from your PA or recording console into this low impedance balanced output. Use the "XLR LEVEL" control to set the output level which matches up best with your PA or recording gear and gives you the least amount of noise. If your board provides 48V phantom power on the XLR cables, the DI Plus will run from this and save the battery. It is suggested that you keep a battery in the unit as a backup when using the phantom power. If the phantom power drops, the DI Plus will automatically switch to battery power. LINE OUT: This is a standard unbalanced line level output signal. Use the "LINE LEVEL" control to adjust the signal level on this jack. This output can be used simultaneously with the XLR OUT jack for some creative signal routing. Plug a standard instrument cable from this output to a stage monitor amp or unbalanced Mic input on a mixer.

Vendo Amplificatore Car Stereo Harman Kardon CA 260 usato pochissimo. Caratteristiche Tecniche: Power Output, RMS 60 watts per channel into 4 Ohms, 20 - 20,000Hz: 90 watts per channel into 2 Ohms, 20 - 20.000Hz: 180 watts bridged mono into 4 Ohms, 20- 20,000Hz HCC (High Instantaneous Current. +/-30A Capability) THD (4 Ohms/2 Ohms): No more than 0.1 %10.2% Negative Feedback: 25dB Power Bandwidth. 10Hz to 100,000Hz Frequency Response 10Hz to 100,000Hz + 0, - 3dB Signal-to-Noise Ratio: 80dB lnput Sensitivity Line Level: 0.1V10.5V (switchable) High Level: 1V Active Crossover Characteristics High Pass. 200Hz, 12dB/Octave Low Pass: 200Hz, 6dB/Octave Power Supply. DC +13.8V (11 -16V usable), negative ground Typical lnput Current Requirements At Idle. 2.5A Full Power MUSIC Signal 6 7A (4 Ohms/ch.) 10A (2 Ohms/ch.) Full Power Sine Wave. 20A (4 Ohms/ch.) 30A (2 Ohms/ch.) Dimensions (W x H x D). 15-518" x 3-718'' x 7-1/8" (396 x 98 x 180mm) Weight. 1Olbs. 202. 14.6kgl