Below 0

Vendo per inutilizzo, amplificatore combo Peavey Blazer 158 Transtube 15W - Made in USA. Ottime condizioni, completo di manuale originale. Specifiche tecniche da sito Peavy di seguito. Rated Power & Load: 15 W RMS into 4 ohms Power Clipping: (Typically) (5% THD, 1 kHz, 120 V AC line) 15 W RMS into 4 ohm Total Harmonic Distortion: Less than 0.5%, 100 mW to 10 W RMS, 60 Hz to 10 kHz, 4 ohms (typically below 0.2%) Power Consumption: 40 W, 50/60 Hz, 120 V AC Spese di spedizione a carico del destinatario.

Vendesi MIXER PROFESSIONALE PER DJ usato in buone condizioni Caratteristiche Channels DJM-600 No. of Channels 4 Channel EQ 3 band EQ Range -26 ~ +12 dB Level MeterType Individual Level Meter Size 15 Segment Input DJM-600 CD/LINE Input 5 PHONO Input 3 MIC Input (XLR) 1 MIC Input (1/4 inch Phone) 1 RETURN (1/4 inch Phone) 1 Output DJM-600 Master Output (XLR) 1 Master Output (RCA) 1 Booth Output (RCA) 1 Rec Out (RCA) 1 Send (1/4 inch Phone) 1 Master DJM-600 Master Balance Si Stereo/Mono Switch Si Level Meter Size 15 Segment Master Out Attenuator Si Cross Fader DJM-600 Cross Fader Type Carbon Rail Fader Curve 3 Type Switch Assignable Yes Field Replaceable Si Monitoring DJM-600 Booth Monitor Yes Cue Type 3 Effect/Sampler DJM-600 Effect Single Effect Beat Effect 8 Auto BPM Counter Si Direct Beat Select Si Effect Level & Depth Volume Si Beat Sampler Si Mic DJM-600 Mic Connection XLR + 1/4" Mic EQ 3 band Mic EQ Range -12 ~ +12 dB Talkover Button General DJM-600 Color Black Dimensions (W x H x D) 320 x 107 x 372 mm Weight 6,6 kg Power Consumption 36 Watt SN Ratio: Line 87 dB SN Ratio: Phono 77 dB SN Ratio: Mic 69 dB Harmonic Distortion Below 0.02% Crosstalk Over 70 dB

Vendesi (per motivi di disuso e mancanza di tempo) MIXER PROFESSIONALE PER DJ in buono stato! Caratteristiche: Channels DJM-600 No. of Channels 4 Channel EQ 3 band EQ Range -26 ~ +12 dB Level MeterType Individual Level Meter Size 15 Segment Input DJM-600 CD/LINE Input 5 PHONO Input 3 MIC Input (XLR) 1 MIC Input (1/4 inch Phone) 1 RETURN (1/4 inch Phone) 1 Output DJM-600 Master Output (XLR) 1 Master Output (RCA) 1 Booth Output (RCA) 1 Rec Out (RCA) 1 Send (1/4 inch Phone) 1 Master DJM-600 Master Balance Si Stereo/Mono Switch Si Level Meter Size 15 Segment Master Out Attenuator Si Cross Fader DJM-600 Cross Fader Type Carbon Rail Fader Curve 3 Type Switch Assignable Yes Field Replaceable Si Monitoring DJM-600 Booth Monitor Yes Cue Type 3 Effect/Sampler DJM-600 Effect Single Effect Beat Effect 8 Auto BPM Counter Si Direct Beat Select Si Effect Level & Depth Volume Si Beat Sampler Si Mic DJM-600 Mic Connection XLR + 1/4" Mic EQ 3 band Mic EQ Range -12 ~ +12 dB Talkover Button General DJM-600 Color Black Dimensions (W x H x D) 320 x 107 x 372 mm Weight 6,6 kg Power Consumption 36 Watt SN Ratio: Line 87 dB SN Ratio: Phono 77 dB SN Ratio: Mic 69 dB Harmonic Distortion Below 0.02% Crosstalk Over 70 dB

Equalizzatore originale americano, 110 volt Frequency Response: 20Hz to 20,000Hz +/- 0.5dB Hum and Noise: 90dB (79uV) below 2.5V flat response. 85dB (140uV) below 2.5V worst case. Harmonic and Intermodulation Distortion: less than 0.02% at 2.5V output 20Hz to 20,000Hz Low frequency Compensation: Variable from 0 to +17dB at 20Hz Input Sensitivity: 2.5V into 27k ohms for rated output with controls set for flat response High Frequency Compensation: Variable +/-10dB at 20,000Hz Output Level and Impedance: 2.5V into 10k ohms or more with the output level at zero and all other controls set for flat response. Programmable Filters: 14 sections (7 per channel) each of which can be programmed for standard 1/3 octave center frequencies from 20Hz to 1000Hz. Filter bandwidth is programmable for narrow (approx. 1/3 octave) or wide (approx. 1 octave). Amplitude is continuously adjustable +/- 12dB for narrow and +/-15 dB for wide. A detented control is used to position for flat response. Programming is achieved by means of plug-in capacitors provided with the MQ107. Size: 3-1/2" high, 5-3/4" wide and 14" long Finish: Chrome and black Weight 7 lbs. 9 oz.

Amplificatore di potenza Classe' CA-2100 in perfette condizioni estetiche e funzionali. Caratteristiche: (balanced inputs) voltage gain: 29.1dB. Bandwidth: 155kHz (-3dB) - 22kHz (-0.1dB). Phase: 1.0Vrms. Power/channel (continuous): 100 wpc into 8 ohm - 200 wpc into 4 ohm. THD + noise (unweighted, 10Hz - 500kHz bandwidth, 0.8Vrms/1kHz input) load (resistive): None: 0.002%, 8 ohm: 0.003%, 4 ohm: 0.005%. Noise FFT noise floor peaks all below -95dBV (with terminated inputs). S/N ratio (relative to 1kHz sine wave full level output into 8 ohm) 105dB. Altre informazioni e recensioni sono di facile consultazione in rete. Mnuale, accessori e imballo originale inclusi. Eventuale presa visione, prova e ririro presso la mia abitazione. Possibile spedizione da concordare. Gradito contatto telefonico. Prezzo leggermente trattabile.

VENDO APPARATO KENWOOD TS 830 M CARATTERISTICHE: SPECIFICATIONS GENERAL Type: Amateur HF transceiver Frequency range: 10-160 m + WARC 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.3 MHz 10.0 MHz (WWV) 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-29.7 MHz Tuning steps: Continuous Mode: AM/SSB/CW Channels/memory management: No Repeater shift/offset: No Power supply: Mains: 120 / 220 VAC Current drain/power consumption: RX: 32 W (heaters off) TX: Max 295 W Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 333*133*333 mm (13.3*5.3*13.3") Weight: 13.5 Kg (29.8 lbs) Other features: VOX, 25 KHz calibrator, NB, IF-shift, VBT (Variable Bandwidth Tuning), IF-output, Tone control RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 8.83 MHz 2nd IF: 455 KHz Sensitivity: AM: 2 uV (10 dB S+N/N) SSB/CW: 0.25 uV (10 dB S+N/N) Selectivity: AM: 6 KHz (-6 dB), 11 KHz (-60 dB) SSB/CW Wide: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB) below Image rejection: 60 dB AF output power/speaker: 1.5 W at ?% distortion / 8 ohms External speaker connector: 8-16 ohms, 3.5 mm TRANSMITTER SECTION RF output power: AM: ~50 W DC (80 W DC input) SSB: ~100 W PEP (220 W PEP input) CW: ~100 W DC (180 W DC input) Modulation system: Max FM deviation: No FM Spurious emissions: Less than -60 dB Microphone impedance/connector: 500 ohms to 50 Kohm / 4-pin MISCELLANEOUS Manufactured: Japan, 1980-1988 (Discontinued) Additional info: Tube hybrid: One 12BY7A driver and two 6146B finals Related documents: Service manual (13 MB) 6146B power tube Modifications: Options/Accessories: AT-230 HC-10 HS-4 HS-5 KB-1 MC-30S MC-35S MC-50 PC-1 SM-220 SP-230 VFO-230 VFO-240 Manual antenna tuner Digital world clock Communications headphones, 8 ohms Deluxe headphone set, 8 ohms Deluxe flywheel VFO tuning knob Noise cancelling hand microphone, 500 ohms Noise cancelling hand microphone, 50 Kohm Desk microphone, 500 ohms/50 Kohm switchable Phone patch with VU-meter Station monitor External speaker with audio filters Remote digital VFO, 20 Hz step and 5 memories Remote VFO

VENDO APPARATO KENWOOD TS 830 M CARATTERISTICHE: SPECIFICATIONS GENERAL Type: Amateur HF transceiver Frequency range: 10-160 m + WARC 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.3 MHz 10.0 MHz (WWV) 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-29.7 MHz Tuning steps: Continuous Mode: AM/SSB/CW Channels/memory management: No Repeater shift/offset: No Power supply: Mains: 120 / 220 VAC Current drain/power consumption: RX: 32 W (heaters off) TX: Max 295 W Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 333*133*333 mm (13.3*5.3*13.3") Weight: 13.5 Kg (29.8 lbs) Other features: VOX, 25 KHz calibrator, NB, IF-shift, VBT (Variable Bandwidth Tuning), IF-output, Tone control RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 8.83 MHz 2nd IF: 455 KHz Sensitivity: AM: 2 uV (10 dB S+N/N) SSB/CW: 0.25 uV (10 dB S+N/N) Selectivity: AM: 6 KHz (-6 dB), 11 KHz (-60 dB) SSB/CW Wide: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB) below Image rejection: 60 dB AF output power/speaker: 1.5 W at ?% distortion / 8 ohms External speaker connector: 8-16 ohms, 3.5 mm TRANSMITTER SECTION RF output power: AM: ~50 W DC (80 W DC input) SSB: ~100 W PEP (220 W PEP input) CW: ~100 W DC (180 W DC input) Modulation system: Max FM deviation: No FM Spurious emissions: Less than -60 dB Microphone impedance/connector: 500 ohms to 50 Kohm / 4-pin CHIAMARE SE VERAMENTE INTERESSATI ASTENERSI DA PROPOSTE ASSURDE. INFO: 338/8520912 Euro: 650,00 Vige la clausola Come visto e piaciuto nello stato in cui si trova

VENDO APPARATO KENWOOD TS 830 M CARATTERISTICHE: SPECIFICATIONS GENERAL Type: Amateur HF transceiver Frequency range: 10-160 m + WARC 1.8-2.0 MHz 3.5-4.0 MHz 7.0-7.3 MHz 10.0 MHz (WWV) 10.1-10.15 MHz 14.0-14.35 MHz 18.068-18.168 MHz 21.0-21.45 MHz 24.89-24.99 MHz 28.0-29.7 MHz Tuning steps: Continuous Mode: AM/SSB/CW Channels/memory management: No Repeater shift/offset: No Power supply: Mains: 120 / 220 VAC Current drain/power consumption: RX: 32 W (heaters off) TX: Max 295 W Antenna impedance/connector: 50-75 ohms / SO-239 Dimensions (W*H*D): 333*133*333 mm (13.3*5.3*13.3") Weight: 13.5 Kg (29.8 lbs) Other features: VOX, 25 KHz calibrator, NB, IF-shift, VBT (Variable Bandwidth Tuning), IF-output, Tone control RECEIVER SECTION Receiver system: Double conversion superheterodyne 1st IF: 8.83 MHz 2nd IF: 455 KHz Sensitivity: AM: 2 uV (10 dB S+N/N) SSB/CW: 0.25 uV (10 dB S+N/N) Selectivity: AM: 6 KHz (-6 dB), 11 KHz (-60 dB) SSB/CW Wide: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB) below Image rejection: 60 dB AF output power/speaker: 1.5 W at ?% distortion / 8 ohms External speaker connector: 8-16 ohms, 3.5 mm TRANSMITTER SECTION RF output power: AM: ~50 W DC (80 W DC input) SSB: ~100 W PEP (220 W PEP input) CW: ~100 W DC (180 W DC input) Modulation system: Max FM deviation: No FM Spurious emissions: Less than -60 dB Microphone impedance/connector: 500 ohms to 50 Kohm / 4-pin CHIAMARE SE VERAMENTE INTERESSATI ASTENERSI DA PROPOSTE ASSURDE. INFO: 338/8520912 Euro: 600,00 Vige la clausola Come visto e piaciuto nello stato in cui si trova

Ottimo finale ibrido di Audio Research, potente e veloce, l'HD220 non teme alcun diffusore. Ottime condizioni, senza imballo originale. Power output 220 watts per channel into 8 ohms from 20Hz to 20kHz. 380 watts per channel into 4 ohms. Power bandwidth Frequency response (-3dB points at 1 watt) 0.5Hz to 200 kHz Input sensitivity 4.0V RMS BAL for rated output. (20.8 dB Bal gain into 8 ohms.) Input impedance 300K ohms Balanced, 150k ohms SE Output taps Output regulation Approximately 0.07dB 8 ohm load to open circuit Overall negative feedback None Damping factor Approximately 130 Distortion Slew rate Rise time Hum & noise Less than 0.1mV RMS -112dB below rated output (IHF weighted, input shorted). Power supply energy storage 200,000 µF Power requirements 105-125VAC 60Hz (210-250VAC 50 Hz) 750 watts at rated output (220 WPC 8 ohms) 1200 watts max (380 WPC 4 ohms) 250 watts at "idle." Tube complement (2) 6H30 driver, (2) 6922 voltage amp. Other Output polarity: Non-inverting. Balanced input pin 2+ (IEC-268). Dimensions 19" (48.3 cm) W x 8.75"(22.2 cm) H x 19.5"(49.5 cm) D. Handles extend 1.5" (3.8 cm) forward. Weight 58.9 lbs. (26.8 kg) Net; 73.8 lbs. (33.6 kg) Shipping