Field service manager industrial

Wyser è la società internazionale di Gi Group che si occupa di ricerca e selezione di middle e senior management specializzato. Facciamo parte di Gi Group, una delle principali realtà a livello internazionale nei servizi dedicati allo sviluppo del mercato del lavoro. Ricerchiamo, per prestigioso cliente, primaria realtà del settore filling, un/una:                  FIELD SERVICE ENGINEER SETTORE FILLING – MACCHINE PER RIEMPIMENTO  Il candidato, interfacciandosi con il proprio responsabile, si occuperà di: - attività di commissioning, installazione, supervisione e attività di training sulle macchine - Eseguire attività di service, retrofitting, manutenzione predittiva ed evolutiva sulle macchine, scrivendo appropriati report al Project Manager di riferimento Requisiti: - Laurea Specialistica in Ingegneria elettronica, dell’automazione e/o diploma ad indirizzo tecnico • 4-5 anni in ruoli di Field Service Engineer maturata nel settore del filling (macchine per il riempimento) • Buona conoscenza del PLC, possibilmente Siemens e/o Rockwell, oppure RS Logix 5000 • Ottime capacità di troubleshooting sulla parte elettrica e meccanica • Disponibilità a viaggiare per circa un 75/85 % del tempo complessivo.  • Buona conoscenza della lingua inglese  • Capacità di lavorare in autonomia e forte spirito di problem solving e di iniziativa • Flessibilità, duttilità, capacità di lavorare in autonomia ma all’occorrenza anche in team, completano le caratteristiche ideali del profilo ricercato. Orario di lavoro Full-Time Sede di lavoro: Parma I candidati ambosessi (D.lgs n. 198/2006) sono invitati a leggere l’informativa privacy ai sensi degli artt. 13 e 14 del Reg. EU 679/2016 al seguente indirizzo: https://it.wyser-search.com/privacy-candidati/ Wyser (Aut. Min. del 15/04/2014 Prot. N: 39/4903) miojob-internal-cv

Desideri unirti ad un'azienda in continua crescita? Space Work seleziona un* FIELD SERVICE ENGINEER per realt dinamica e stimolante. Lazienda cliente una realt all'avanguardia, specializzata nella produzione e distribuzione di tessuti di alta qualit per l'industria cartaria e per impianti di cartone ondulato. Descrizione dellattivit: In qualit di tecnico assistenza presso la clientela, ti occuperai di fornire assistenza tecnica ai clienti nel campo del montaggio e utilizzo dei manufatti sugli impianti per la produzione di carta e cartone ondulato. Avrai lopportunit di visitare i clienti in Italia e allestero e, nello, specifico, ti occuperai: Della risoluzione dei problemi tecnici, del montaggio dei manufatti sugli impianti e della verifica del mantenimento delle caratteristiche tecniche dei manufatti, al fine di garantire un funzionamento attuale degli stessi sugli impianti; Di effettuare interventi di assistenza tecnica su impianti per la produzione di carta in conformit con le specifiche del cliente. Diagnosticare e risolvere problemi tecnici o eventuali criticit in modo tempestivo, garantendo la massima efficienza operativa degli impianti. Partecipare a progetti di installazione di nuovi impianti o miglioramenti, offrendo supporto tecnico durante tutte le fasi. Requisiti richiesti: Disponibilit a trasferte e visite presso i clienti sul territorio nazionale e in prospettiva anche allestero; Preferibile Diploma di Perito Meccanico o Laurea in Ingegneria Meccanica; Preferibile esperienza pregressa di internship o in ufficio tecnico e di manutenzione impianti per assistenza al cliente. Sar considerata un plus lesperienza pregressa nella fornitura di assistenza tecnica su impianti industriali, preferibilmente nel settore cartiera; Ottima conoscenza della Lingua inglese. La conoscenza di una seconda lingua sar considerata un plus; Buona conoscenza del Pacchetto Office. Completano il profilo: Ottime doti relazionali e di organizzazione; Proattivit; Buona capacit di gestire in autonomia il lavoro; Orientamento al risultato ed approccio pragmatico; Flessibilit; Buone capacit di lavorare in team. Lazienda offre: Avrai la possibilit di crescere professionalmente in un'azienda leader nel settore tessile, con un ambiente di lavoro stimolante e collaborativo. Formazione on the job e affiancamento iniziale al Sales Manager. La formazione specifica tecnica sar a cura dellAzienda con lutilizzo di attrezzature dedicate e di produzione interna di altissima qualit, affiancando il personale aziendale addestrato e qualificato; Possibilit di crescita nel settore tecnico commerciale seguendo clienti o mercati in tutto il mondo; Mensa aziendale, smart working in caso di necessit, flessibilit oraria, assistenza sanitaria, pc e cellulare aziendale; Contratto di assunzione. Inquadramento e retribuzione commisurati allesperienza. Sede di lavoro: Provincia di Brescia Referente della selezione: Elena Gasparini L'offerta di lavoro qui pubblicata si rivolge a candidati di entrambi i sessi ai sensi della legge (D.Lgs. 198/2006) PER PARTECIPARE ALLA SELEZIONE CANDIDARSI ALLANNUNCIO: https://spacework.intervieweb.it/jobs/field-service-engineer-rif-61716a-466100/it/

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Mantova – Bologna – Reggio Emilia The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - FERRARA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona CENTO - FERRARA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINI

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - LUCCA - TOSCANA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona LUCCA - TOSCANA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

GREENTALENT, Business Line di Aegis Human Consulting Group specializzata nella ricerca e selezione di professional e manager nei settori Energy, Engineering ed Environment, ricerca e seleziona per affermata società impiantistica attiva nel settore della costruzione di impianti fotovoltaici, un: Commissioning Manager Il candidato ideale possiede un titolo di laurea in ingegneria elettrica/elettronica oppure possiede un titolo accademico equipollente. Ha maturato un’esperienza di almeno 5 anni in attività di Operation & Mainteinance, Field Service o attività di commissioning di parchi fotovoltaici. La risorsa scelta verrà inserita nel dipartimento O&M e si occuperà n...

Responsible for the installation, service and maintenance of GPI machinery in constumer facilities. The incumbent is a key member of the Technical Service team and oartners with our converting and sales teams to meet the needs of the customers. Key Responsibilities: Conducts top-level troubleshooting, diagnosis and repair of electrical, mechanical and controls related problems on machines installed at customer locations, including overhauls and field upgrades as necessaryParticipates in the development, processing and follow up of specifications during machinery tests, debugging and start up, as well as, during the development and field testing of new carton designsDevelops and maintains productive working relationships with customers and acts professionally and proactively to resolve equipment, cartons or service-related issuesAs the technical expert, partners with sales and converting manufacturing individuals and teams to resolve customer issues, as well as, support new business opportunities and product development projectsApplies continuous improvement concepts and techniques to increase equipment productivity. Participates in process improvement and cost reduction initiatives.Effectively utilizes IT systems (in-house and standard applications)Maintains skill base necessary and consistent with machinery and carton technologyProvides instruction and training to customers' staff on safety, operations, machinery maintenance and proper carton handling proceduresPrepares service reports, modified schematics, standard operating procedures and carton specification updates to support field initiatives and changesReports on progress of projects / assignments to all internal and external stakeholdersConducts audits, evaluations and assessment of machine systems / performance resultsLiaises with other companies / OEM's working on common projects This is a summary of the key responsibilities of this position. The Company reserves the right to require the role-holder to undertake such additional tasks or duties as may be within their capabilities and abide by all reasonable rules and instruction given by the Company. Qualifications and Experience Important Graphic Packaging Holding Company Good career opportunityMain Skills:Higher level of English reading, writing and speaking skills4 or more years of related experience and/or formal training in equipment maintenance, repair and troubleshooting. Knowledge of packaging or similar equipment is advantageousTechnical training with graduation or education of industrial or mechanical engineeringDemonstrated ability to ready electrical, mechanical engineering PLC and operator interface knowledgeWorking knowledge of continuous improvement methods, i.e. Six Sigma methodologyMust be prepared to travel if required on short notice. Working hours are flexible to meet Customer demands. Some shift / out of hours working will be required as necessary.Full clean driving license Key CompetenciesEffective communicator, both orally and written, with internal and external customersSuccessfully identifies root causes and resolves problems and issuesDevelops positive customer relationships through customer-focused mindset, build trustIs a team player, works well with others inside and outside the organizationIs a self-starter, has initiative, can effectively work independently with minimal direct supervisionEffectively manages time, plans, projects and related tasksFlexible approach to ensure timely and professional service to support customer and the internal manufacturing processContinuously meet targets and objectives, accountable for results Important Graphic Packaging Holding Company.Ottima opportunità di carriera.

SEID srl, an industrial automation company close to Clusone (BG) in the field of automation applied to Oil & Gas sector, is looking for a PLC field engineer for the commissioning of machines and / or plants. The period of activity abroad may vary from a few days up to 4-5 weeks per single journey; the typical destinations are Middle Eastern countries, Russia and Asian countries. The overall availability to work abroad - required on an annual basis - is around 6-8 months / year. The selected candidate will be placed in the Service division where there are already many technicians who regularly travel. During work periods at the company headquarters, the new engineer will be carry out the functional tests of the electrical panels, in anticipation of the subsequent on-site commissioning activity; The ideal candidate has the following requirements: • knowledge of PLC programming elements, with preference for PLC Siemens and/or Rockwell; • knowledge of electrical diagnostic tools such as multimeter and current generator; knowledge of field instruments is welcome, such as temperature / pressure / flow transmitters, with Hart protocol; • flexibility and good manual skills accompanied by problem solving attitude; • diploma of technical institute or degree with electrotechnical / electronic / IT specialization or equivalent; • willingness to travel for a total of 6-8 months / year, not continuous, in the terms specified above; • Good knowledge of the English language. A second language is also welcome, in particular Russian. Company headquarters: close to Clusone (BG) If you think to be the right candidate, please send us your curriculum, with authorization for personal data treatment.

Our Client is a Multinational US Company, leader in the production of Power Units and small and medium Diesel Engines for a wide range of Customers, Dealers and B2B in the Automotive, Construction and Agricultural Industry. Advanced Pre and post Sales culture, supported by New Digital Projects, are today allowing improved Services for the Sales Organizations worldwide, Distributors and Dealers, OEM’s and Sales offices, meeting the Customer’s needs and expectation of Service Management. The candidate we are selecting will be in charge of the implementation of the Digital Transformation Project. The position is open for a Customer System Solutions Manager Digital Transformation projects BASIC FUNCTION Responsible for Field Customer Support Systems, He/She: Proposes and coordinates the development and implementation of web based and IT Systems able to provide technical support and documentation to the Service Dealers, Distributors, OEMs and regional Sales offices. Implements Digital Transformation projects deeply changing the way in which the company interacts with its Distribution network and End Users. SPECIFIC RESPONSIBILITIES The Manager, with the support of his/her team, is responsible of developing, planning, budgeting, overseeing all Aftermarket Customer Support Systems for Diesel Engines Globally. More specifically: Defines specification, assures maintenance for and web-based platform systems to make technical documentation available to third party companies associated to the Company Service and Parts Network, to OEM customers and their network when so regulated by OEM Service Contracts. Proposes, defines and coordinates projects for developing: Diagnostic tools and functionalities for Electronically controlled Common Rail Diesel Engines Web based Spare Parts Look up, Parts Ordering system and Warranty System E-commerce and Mobile Apps Web Platforms and other web-based IT systems for Aftermarket Parts & Service IT Systems aimed at supporting OEMs Customer end-of line and on-field using available technology to better meet customer needs. The Candidate we like to meet has a University level of Education, Web based and IT knowledge as well as proven project and team management. Experience in after sales and service is a plus. The ideal candidate is fluent in English, has good attitudes in dealing with colleagues at all levels and Customers worldwide. Problem Solving, independence, attitude to travel managing situations within different cultures is a part of the position. Providing leadership through effective goal setting, support, delegation and communication, He/she Assigns tasks to the team allowing to effectively perform and assuring they deliver high-quality product in alignment with the overall products delivery schedule: Supervises the creation and maintenance of technical documentation to support Spare Parts identification and sales, such as. Assures support, informs, periodically travels and meets colleagues in Spare Parts Sales, Service Network management, Engine Sales globally in all Regions (EMEA, NA, LATAM, CHINA and APAC, INDIA) to train in the use of the tools, to get their feedback and collect information about their needs. Coordinates and develops synergies, encourages the implementation of common systems whenever possible, with the colleagues responsible for the same activities for Kohler gasoline engines and with the other entities and companies of Power Group. Supervises the creation, developing, writing and editing technical documentation to support operation and maintenance of products, such as Use & Maintenance Manuals, Service Manuals for service workshops, training and service tools documentation. Coordinates planning, scheduling, delivering, and communicating the status of related projects and provides periodic reports, keeping management informed of area activities and of any significant concerns or problems. Ensures customer receives required data in a timely manner. Grants support to OEM’s and OEM’s network about the above-mentioned topics. The Company offers: A Permanent Contract directly with the EMEA HQ, Based in Reggio Emilia (Italy) A highly professional environment, advanced technology with focus on Quality and Customer Satisfaction. To apply for this position We invite interested candidates m/f (Legislative Decree 903/77) meeting the requirements of the position Customer System Solutions Manager Rif. 263/19 CSSM to send: updated CV, covering letter. Kindly send you CV and letter of presentation in English or Italian. For first contact with qualified candidates, the initial interviews can be conducted via Skype. You are welcome to contact Susanne Kristiansen, s.kristiansen@kpconsulting.it, Senior Executive Consultant. Responsible for this project, or contact our office directly on 0039 0522 512067. All candidates meeting the described profile will be contacted within two weeks. K&P Consulting Srl, as a permanently associated company in the Register of Employment Agencies Ref. No 39/0002041, invites all candidates (Law 903/77) to read the privacy statement (Article 13 of Legislative Decree 196/2003) on the website www.kpconsulting.it

La figura ricercata si occuperà di: Management e gestione di un team composto da Account / project manager senior oltre ad altre risorse più junior. People management Verifica dei KPI e degli Obiettivi del Team Gestione rapporto con i clienti Relazione commerciale e corporate con i clienti top della società Negoziazione di deal e accordi e commerciali Presentazione clienti e attività di supervisione in ambito project management Gestione del rapporto con stake holder aziendali interni ed esterni Riportare il proprio operato direttamente alla Direzione Generale Servizi offerti: Field marketing services Head of Field Marketing Service Division - Marketing OperativoSocietà leader nel settore del Field Marketing e Marketing operativoIl candidato ideale possiede:Provenienza dal settore del Field Marketing / Marketing operativoEsperienza nella gestione e coordinamento di un teamOttima conoscenza del pacchetto OfficeEccellente background analitico e numericoBuona conoscenza della lingua ingleseCapacità di Team WorkingFlessibilità e leadership Importante società leader nel mercato del field marketing e marketing operativo con oltre 300 dipendenti e diverse sedi in ItaliaOttima opportunità di carriera.Salario da 40.000 €/anno a 60.000 €/anno

European manufacturer leader of special components for Building, Painting, Automotive industries and DIY business, supplying customers in more than 50 countries worldwide. European markets represent an important part of the total turnover. Following our expansion plan and in order to segment geographical areas we will add a new Area Sales Manager who reporting to the Global Sales Manager will be responsible for operating the assigned markets within the scope to achieves sales targets by providing independent sales coverage of assigned accounts or within assigned territory. Responsibilities: Meet established sales target and goals for assigned territory. Develop new account and build up long-lasting customer relationships Proactively reports all new or unusual pertinent market information, competitive activities, and product performance information to supervisor Applies the business unit's sales policies, practices and procedures. Mapping out opportunities and new business in DIY, Building and Automotive & After market sector Report required field sales activity through company specified CRM system Attending trade shows and other marketing events. Qualifications: Education: Bachelor’s degree level of educations is preferred but non mandatory Previous International sales experience and strong understanding of selling concepts is required Experience in at least one of the following sector DIY, Building, Automotive & Aftermarket or Industrial sector Fluent in English and French is mandatory. Any additional language is a must Skilled and proficient in use of computers to include but not limited to Microsoft Products-Outlook, Word, Excel, PowerPoint-as well as ability to use Customer Relationship Management software programs. Travel willingness: 50% - 75% working time Salary An interesting package will be discussed accordingly to the experience and market knowledge (from 45000). Benefits and target bonus will be discussed as a part of the deal.

A well established company active in the industrial electronic market of visualization and embedded solutions, aiming to increase its market presence and business volume, is looking for Sales & Marketing Manager with proven experience in the specific area of the company activity, capable of conducting qualified technical and commercial transactions and coordinating a team of inside & field sales and application engineers for achieving the company objectives. fluency in English is required

A well established company active in the industrial electronic market of visualization and embedded solutions, aiming to increase its market presence and business volume, is looking for Sales & Marketing Manager with proven experience in the specific area of the company activity, capable of conducting qualified technical and commercial transactions and coordinating a team of inside & field sales and application engineers for achieving the company objectives. fluency in English is required.

ZURU TECH, the engineering division of the multinational ZURU Company, specialized in the development of innovative software in the architectural and manufacturing field, researches for its own marketing department the figure of a Marketing & Community Manager. The profile will be responsible for digital marketing, online communication, and promotion of the company’s product: Dreamcatcher, the first app that crafts real buildings! The role includes the marketing management about the project mainly through social channels, discussion groups / online forums, blogs and video channels. In particular, the expert will compete for the creation of a new community and the management of the same around the Zuru Tech brand, the development of the digital advertising strategy with a view to millennial-marketing, as well as the management of all customer relations. The searched figure has the following requirements: - Degree in Marketing with specialization in Web Marketing or Master or, alternatively, Specialization in Digital marketing / Social media marketing / Digital communication and interactive technologies. - Experience of 2 years at least inside marketing departments of B2C companies specialized in services or design (better if in international technology companies) - solid knowledge in the professional use of the most widespread social media platforms including Facebook, Instagram, Twitter, Reddit, Youtube, Linkedin - editing and copywriting skills suitable for each platform, (from writing blog articles - corporate or not - by a SEO perspective to a successful tweet, up to the use of effective storytelling techniques) and targeting through Google Analytics, with processing of reports. - ability to manage the online Community and customer service, both oriented to stimulate direct discussion with potential or real clients, and influencers / experts in the world of architecture and design - ability to conduct debates and interviews in video broadcasts - ability to organize promotional events and meetups - appreciated ability to use multimedia tools for creating graphic content (images, gifs, videos) such as Photoshop Illustrator, Adobe Premier for editing, After Effects for video. - passion for research and continuous study of sources, news and ideas in the field of communication and marketing related to the world of construction and design with a strong focus on innovation and new technologies. - good level of general culture about gaming or technology - strong creative vein and dialectical skills too - Fluent English knowledge, both written and spoken Optional requirements: - Degree in Architecture or Interior Design He/she will have the following responsibilities: - develop a social media-marketing strategy inspired by the so-called millennial-marketing in order to increase the popularity and diffusion of the company's product and brand - activate and manage social media channels such as Facebook, Instagram, Twitter, Reddit, Pinterest, Google+, Youtube and Linkedin - research and manage key relationships and plan collaborations with experts and influencers in the world of architecture and design, both nationals and internationals - plan and create innovative and engaging editorial, web and multimedia content and to spread it effectively - collaborate with the graphic team for the creation of marketing, advertising and promotional materials - participate in person as a host / moderator in debates and interviews for video broadcasts - manage the social communities in person, taking care to respond adequately to the online customer and to develop discussions - organize meetups and promotional events - monitor and report on the performance of social media platforms through the use of Google Analytics or similar. We offer: level and contract period commensurate with the experience, employment purpose WORKING CENTER: MODENA For more information, visit https://zuru.tech/ The research is addressed to both sexes (Legislative Decree No. 198/2006) and to people of all ages and all nationalities, pursuant to legislative decrees 215/03 and 216/03. Candidates interested and in possession of the required requirements are invited to send their curriculum vitae, including the authorization to process personal data, pursuant to Legislative Decree 196/03 and art. 13 GDPR 679/16

Our client, part of an international group, leader in delivering sustainable treatment and reuse solutions, commissioned us to search a: PROJECT MANAGER – Water treatment plant Main responsibilities • Assuring all aspects of a project are being executed efficiently and cohesively, both on budget and on schedule • Planning & coordinating all engineering & procurement functions of projects • Coordinating site service and subcontractors • Managing erection team with the support of site manager • Maintaining schedules and budgets including prioritizing schedules, monitoring expenditures and implementing customer change orders • Developing & managing scopes of work for field installation of projects • Evaluating equipment, proposals, and internal designs for reliability and integrity • Delegating project tasks to other engineers as needed for successful completion of the project • Providing detailed civil, mechanical & electrical design review and review & approval of shop drawings • Estimating civil, structural and mechanical costs for design build (DB) projects • Assessing risks related to design and implementation and determine contingency plans • Preparing construction installation specifications and evaluating contractor proposals • Coordinating and/or personally inspecting equipment and installation Requirements • A Bachelor’s degree in an Engineering discipline • Minimum of five (5) years’ experience in Project Engineering/ Project Management • Experience in water treatment plant and/or anaerobic digestion • Fluent in written and spoken Italian and English. Spanish knowledge preferred • Experience in international groups • Availability to travel internationally for short periods • Preferred Project Management certification Location: Padua, Italy.