Low frequencies flanger

Nuovo diffusore rcf art 310-a mk4 disponibile in sede nuovo con garanzia 2 anni specifiche tecniche: features 127 db max spl 800 watt 2-way peak power dsp processing with firphase 10" high powered woofer 1" hf driver, mylar dome, 1.5" voice coil high power handling low impedance crossover design acoustical specifications frequency response -3 db:50 hz ÷ 20000 hz max spl:127 db horizontal coverage angle:90° vertical coverage angle:70° compression driver:1", 1.5" v.c. woofer:10", 2.0" v.c input/output section input signal:bal/unbal input connectors:xlr, jack output connectors:xlr input sensitivity:-2 dbu / +4 dbu mic. input sensitivity:-32 processor section crossover frequencies:1800 hz protections:thermal, rms limiter:soft limiter controls:volume, boost, mic/line amplifier specifications total power:800 w peak high frequencies:200 w peak low frequencies:600 w peak total power:400 w rms high frequencies:100 w rms low frequencies:300 w rms cooling:convection connections:vde cabinet cabinet material:composite pp hardware:2xm10 flying p. handles:1 top pole mount/cap:yes grille:steel colour:black physical specifications height:537 / 21.14 mm/inch width:337 / 13.26 mm/inch depth:315 / 12.40 mm/inch net weight:12.2 / 26.9 kg/lbs db, sennheiser, shure, akg, beyerdynamic, rcf, fbt, meyer sound, montarbo, audiodesign, electro voice, soundcraft

NUOVO DIFFUSORE RCF ART 710-A MK4 - 700W RMS - 1400W PEAK SPL: 129dB DISPONIBILI IN SEDE NUOVO CON GARANZIA 2 ANNI - SIAMO DISTRIBUTORI Specifiche Tecniche 129 dB Max SPL 1400 WATT 2-way peak power Innovative DSP Processing 1" Compression Driver, 1.75" v.c. 10" Woofer 90°x70°, wide dispersion constant directivity horn FiRPHASE Technology ACOUSTICAL SPECIFICATIONS Frequency Response -3 dB:50 Hz ÷ 20000 Hz Max SPL:129 dB Horizontal coverage angle:90° Vertical coverage angle:70° Compression Driver:1.0", 1.75" v.c. Woofer:10", 2.5" v.c. INPUT/OUTPUT SECTION Input signal:bal / unbal Input connectors:XLR, Jack Output connectors:XLR Input sensitivity:-2 dBu / +4 dBu PROCESSOR SECTION Crossover frequencies:1600 Hz Protections:Thermal, rms Limiter:Soft limiter Controls:Volume, Boost, Mic/Line AMPLIFIER SPECIFICATIONS Total power:1400 W PEAK High frequencies:400 W PEAK Low frequencies:1000 W PEAK Total power:700 W RMS High frequencies:200 W RMS Low frequencies:500 W RMS Cooling:Convection / foced Connections:VDE conncector in CABINET Cabinet Material:Composite PP Hardware:2xM10 flying p. Handles:1 top Pole Mount/Cap:Yes Grille:Steel Colour:Black PHYSICAL SPECIFICATIONS Height:548 / 21.6 mm/inch Width:340 / 13.3 mm/inch Depth:305 / 12.0 mm/inch Net Weight:14.4 / 31.75 kg/lbs VISITA IL NOSTRO SITO: www.dimensione-suono.com DB, SENNHEISER, SHURE, AKG, BEYERDYNAMIC, RCF, FBT, MEYER SOUND, MONTARBO, AUDIODESIGN, ELECTRO VOICE, SOUNDCRAFT

NUOVO DIFFUSORE RCF ART 712-A MK4 - 700W RMS - 1400W PEAK SPL: 129dB DISPONIBILI IN SEDE NUOVO CON GARANZIA 2 ANNI - SIAMO DISTRIBUTORI Specifiche Tecniche Frequency Response -3 dB:50 Hz ÷ 20000 Hz Max SPL:129 dB Horizontal coverage angle:90° Vertical coverage angle:60° Compression Driver:1", 1.75" v.c. Woofer:12", 2.5" v.c. INPUT/OUTPUT SECTION Input signal:bal / unbal Input connectors:XLR, Jack Output connectors:XLR Input sensitivity:-2 dBu / +4 dBu PROCESSOR SECTION Crossover frequencies:1600 Hz Protections:Thermal, rms Limiter:Soft limiter Controls:Volume, Boost, Mic/Line AMPLIFIER SPECIFICATIONS Total power:1400 W PEAK High frequencies:400 W PEAK Low frequencies:1000 W PEAK Total power:700 W RMS High frequencies:200 W RMS Low frequencies:500 W RMS Cooling:Convection / forced Connections:VDE connector in CABINET Cabinet Material:Composite PP Hardware:2xM10 flying p. Handles:2 side, 1 top Pole Mount/Cap:Yes Colour:Black PHYSICAL SPECIFICATIONS Height:637 / 25.0 mm/inch Width:387 / 15.2 mm/inch Depth:363 / 14.2 mm/inch Net Weight:18 / 39.6 kg/lbs DB, SENNHEISER, SHURE, AKG, BEYERDYNAMIC, RCF, FBT, MEYER SOUND, MONTARBO, AUDIODESIGN, ELECTRO VOICE, SOUNDCRAFT

NUOVO DIFFUSORE RCF ART 715-A MK4 - 700W RMS - 1400W PEAK SPL: 130dB DISPONIBILI IN SEDE NUOVO CON GARANZIA 2 ANNI - SIAMO DISTRIBUTORI Specifiche Tecniche Frequency Response -3 dB:45 Hz ÷ 20000 Hz Max SPL:130 dB Horizontal coverage angle:90° Vertical coverage angle:60° Compression Driver:1", 1.75" v.c. Woofer:15", 2.5" v.c. INPUT/OUTPUT SECTION Input signal:bal / unbal Input connectors:XLR-Jack Output connectors:XLR Input sensitivity:-2 dBu / +4 dBu PROCESSOR SECTION Crossover frequencies:1600 Hz Protections:Thermal, rms Limiter:Soft limiter Controls:Volume, Boost, Mic/Line AMPLIFIER SPECIFICATIONS Total power:1400 W PEAK High frequencies:400 W PEAK Low frequencies:1000 W PEAK Total power:700 W RMS High frequencies:200 W RMS Low frequencies:500 W RMS Cooling:Convection / forced Connections:VDE connector in CABINET Cabinet Material:Composite PP Hardware:2xM10 flying p. Handles:2 side, 1 top Pole Mount/Cap:Yes Colour:Black PHYSICAL SPECIFICATIONS Height:708 / 27.87 mm/inch Width:437 / 17.2 mm/inch Depth:389 / 15.31 mm/inch Net Weight:19.6 / 43.21 kg/lbs VISITA IL NOSTRO SITO: www.dimensione-suono.com DB, SENNHEISER, SHURE, AKG, BEYERDYNAMIC, RCF, FBT, MEYER SOUND, MONTARBO, AUDIODESIGN, ELECTRO VOICE, SOUNDCRAFT

Nuovo diffusore rcf art 315-a mk4 disponibili in sede nuovo con garanzia 2 anni - siamo distributori specifiche tecniche: features 129 db max spl 800 watt 2-way peak power dsp processing with firphase 15" woofer, high power 2.5" voice coil 1" hf driver, mylar dome, 1.5" voice coil acoustical specifications frequency response -3 db:45 hz ÷ 20000 hz max spl:129 db horizontal coverage angle:90° vertical coverage angle:60° compression driver:1", 1.5" v.c. woofer:15", 2.5" v.c. input/output section input signal:bal / unbal input connectors:xrl, jack output connectors:xlr input sensitivity:-2 dbu/+4 dbu mic. input sensitivity:-32 dbu processor section crossover frequencies:1800 hz protections:thermal, rms limiter:soft limiter controls:volume, boost, mic/line amplifier specifications total power:800 w peak high frequencies:200 w peak low frequencies:600 w peak total power:400 w rms high frequencies:100 w rms low frequencies:300 w rms cooling:convection connections:vde cabinet cabinet material:composite pp hardware:4xm10 flying p. handles:1 top, 2 side pole mount/cap:yes grille:steel colour:black physical specifications height:680 / 26.77 mm/inch width:405 / 15.94 mm/inch depth:345 / 13.58 mm/inch net weight:17.1 / 37.7 kg/lbs db, sennheiser, shure, akg, beyerdynamic, rcf, fbt, meyer sound, montarbo, audiodesign, electro voice, soundcraft

Nuovo diffusore rcf art 715-a mk4 - 700w rms - 1400w peak spl: 130db disponibili in sede nuovo con garanzia 2 anni - siamo distributori specifiche tecniche frequency response -3 db:45 hz ÷ 20000 hz max spl:130 db horizontal coverage angle:90° vertical coverage angle:60° compression driver:1", 1.75" v.c. woofer:15", 2.5" v.c. input/output section input signal:bal / unbal input connectors:xlr-jack output connectors:xlr input sensitivity:-2 dbu / +4 dbu processor section crossover frequencies:1600 hz protections:thermal, rms limiter:soft limiter controls:volume, boost, mic/line amplifier specifications total power:1400 w peak high frequencies:400 w peak low frequencies:1000 w peak total power:700 w rms high frequencies:200 w rms low frequencies:500 w rms cooling:convection / forced connections:vde connector in cabinet cabinet material:composite pp hardware:2xm10 flying p. handles:2 side, 1 top pole mount/cap:yes colour:black physical specifications height:708 / 27.87 mm/inch width:437 / 17.2 mm/inch depth:389 / 15.31 mm/inch net weight:19.6 / 43.21 kg/lbs visita il nostro sito: dimensione suono di mauro di diomede, via felice barnabei 30, 64100 teramo - dimensione-suono.com db, sennheiser, shure, akg, beyerdynamic, rcf, fbt, meyer sound, montarbo, audiodesign, electro voice, soundcraft

Nuovo diffusore rcf art 712-a mk4 - 700w rms - 1400w peak spl: 129db disponibili in sede nuovo con garanzia 2 anni - siamo distributori specifiche tecniche frequency response -3 db:50 hz ÷ 20000 hz max spl:129 db horizontal coverage angle:90° vertical coverage angle:60° compression driver:1", 1.75" v.c. woofer:12", 2.5" v.c. input/output section input signal:bal / unbal input connectors:xlr, jack output connectors:xlr input sensitivity:-2 dbu / +4 dbu processor section crossover frequencies:1600 hz protections:thermal, rms limiter:soft limiter controls:volume, boost, mic/line amplifier specifications total power:1400 w peak high frequencies:400 w peak low frequencies:1000 w peak total power:700 w rms high frequencies:200 w rms low frequencies:500 w rms cooling:convection / forced connections:vde connector in cabinet cabinet material:composite pp hardware:2xm10 flying p. handles:2 side, 1 top pole mount/cap:yes colour:black physical specifications height:637 / 25.0 mm/inch width:387 / 15.2 mm/inch depth:363 / 14.2 mm/inch net weight:18 / 39.6 kg/lbs db, sennheiser, shure, akg, beyerdynamic, rcf, fbt, meyer sound, montarbo, audiodesign, electro voice, soundcraft

DI Plus Read user experiences here. "The ULTRASOUND DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after our famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power. (Originally called ULTRA PDI.) INSTRUMENT INPUT: This input is designed for all passive and active type pickup signals. When a plug is inserted, the 9V battery is switched on. INSTRUMENT OUTPUT: This is a "parallel" jack which can be used to send the "guitar/instrument signal" to an external tuner, guitar amp or other device which can use an instrument level signal. EFX LOOP: This is a real world "EFX LOOP". In an effort to save room, most of our competition uses a TRS jack (tip, ring, sleeve) and Y cable type system. The DI+ is provided with two 1/4" jacks, one for "SEND" and one for "RETURN". Since the EFX LOOP interrupts the signal path it can be used as an insert point for a volume pedal, compressor, or tuner, if the tuner is equipped with a bypass switch. (Try that with one of our competitors units) SEND: The signal on the SEND jack is post-input gain and pre EQ. This means that you can use the SEND signal as an auxiliary unbalanced direct output. This signal is not affected by any of the panel controls with exception of the "INPUT GAIN" control. RETURN: A plug inserted into the RETURN jack will interrupt the signal path. The signal on the tip of the plug inserted into the RETURN jack will be the signal that the DI Plus will process. INPUT GAIN: The "INPUT GAIN" is not a volume control, rather this control sets the level of amplification applied to the input signal to boost it to a useable level. The reason this is adjustable is to accommodate a wide range of pickup devices. BASS: This is an "Active" control. The BASS control adjusts the amount of cut or boost in the low frequency (150HZ) range. TREBLE: This is an "Active" control. The TREBLE control adjusts the amount of cut or boost in the high frequency (5kHZ) range. NOTCH FILTER: ON/OFF - Enables or disables the NOTCH FILTER control. FREQ. HZ - Sets the frequency (100-350HZ) of the 18db cut NOTCH FILTER that is used to control resonant feedback. SHAPE: ON/OFF - This toggle switch enables or disables the SHAPE control. This control is a mid dip control. In the ON position, the mid frequencies will be cut and the high and low frequencies will be boosted. PHASE: IN/OUT - Changes the polarity of the signal. Phase affects the way the guitar top is pressurized by the loudspeakers. When the signals are out of phase with each other, low-end feedback is minimized. If you experience ⤽positive acoustic⤝ feedback on stage, flip the phase switch from its current setting to see if this will kill the feedback. If inverting phase alone does not eliminate feedback, the notch filter can be used. Phase will also affect the way the guitar signal mixes live and when recording. XLR LEVEL: This control adjusts the amount of signal sent to the XLR OUT jack. LINE LEVEL: This control adjusts the amount of signal sent to the LINE OUT jack. 48V: (Phantom Power) This LED lights when there is 48V Phantom Power present on the XLR OUT jack. No battery drain will occur when Phantom Power is present. POWER: This LED indicates the DI PLUS is ready to operate. The POWER LED will illuminate when: A. A plug is inserted into the INPUT jack and there is a fresh battery installed in the DI PLUS. B. A 9VDC adapter (Wall Wart) is plugged into the power jack. (9VDC Regulated Power Supply - 500mA) (2.1MM DC Power Plug, Center +) C. There is 48V phantom power on the XLR cable plugged into the XLR OUT jack. (The 48V LED and the POWER LED will both be illuminated.) XLR OUT: Plug a standard XLR cable from your PA or recording console into this low impedance balanced output. Use the "XLR LEVEL" control to set the output level which matches up best with your PA or recording gear and gives you the least amount of noise. If your board provides 48V phantom power on the XLR cables, the DI Plus will run from this and save the battery. It is suggested that you keep a battery in the unit as a backup when using the phantom power. If the phantom power drops, the DI Plus will automatically switch to battery power. LINE OUT: This is a standard unbalanced line level output signal. Use the "LINE LEVEL" control to adjust the signal level on this jack. This output can be used simultaneously with the XLR OUT jack for some creative signal routing. Plug a standard instrument cable from this output to a stage monitor amp or unbalanced Mic input on a mixer.

DI Plus Read user experiences here. "The ULTRASOUND DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after our famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power. (Originally called ULTRA PDI.) INSTRUMENT INPUT: This input is designed for all passive and active type pickup signals. When a plug is inserted, the 9V battery is switched on. INSTRUMENT OUTPUT: This is a "parallel" jack which can be used to send the "guitar/instrument signal" to an external tuner, guitar amp or other device which can use an instrument level signal. EFX LOOP: This is a real world "EFX LOOP". In an effort to save room, most of our competition uses a TRS jack (tip, ring, sleeve) and Y cable type system. The DI+ is provided with two 1/4" jacks, one for "SEND" and one for "RETURN". Since the EFX LOOP interrupts the signal path it can be used as an insert point for a volume pedal, compressor, or tuner, if the tuner is equipped with a bypass switch. (Try that with one of our competitors units) SEND: The signal on the SEND jack is post-input gain and pre EQ. This means that you can use the SEND signal as an auxiliary unbalanced direct output. This signal is not affected by any of the panel controls with exception of the "INPUT GAIN" control. RETURN: A plug inserted into the RETURN jack will interrupt the signal path. The signal on the tip of the plug inserted into the RETURN jack will be the signal that the DI Plus will process. INPUT GAIN: The "INPUT GAIN" is not a volume control, rather this control sets the level of amplification applied to the input signal to boost it to a useable level. The reason this is adjustable is to accommodate a wide range of pickup devices. BASS: This is an "Active" control. The BASS control adjusts the amount of cut or boost in the low frequency (150HZ) range. TREBLE: This is an "Active" control. The TREBLE control adjusts the amount of cut or boost in the high frequency (5kHZ) range. NOTCH FILTER: ON/OFF - Enables or disables the NOTCH FILTER control. FREQ. HZ - Sets the frequency (100-350HZ) of the 18db cut NOTCH FILTER that is used to control resonant feedback. SHAPE: ON/OFF - This toggle switch enables or disables the SHAPE control. This control is a mid dip control. In the ON position, the mid frequencies will be cut and the high and low frequencies will be boosted. PHASE: IN/OUT - Changes the polarity of the signal. Phase affects the way the guitar top is pressurized by the loudspeakers. When the signals are out of phase with each other, low-end feedback is minimized. If you experience “positive acoustic” feedback on stage, flip the phase switch from its current setting to see if this will kill the feedback. If inverting phase alone does not eliminate feedback, the notch filter can be used. Phase will also affect the way the guitar signal mixes live and when recording. XLR LEVEL: This control adjusts the amount of signal sent to the XLR OUT jack. LINE LEVEL: This control adjusts the amount of signal sent to the LINE OUT jack. 48V: (Phantom Power) This LED lights when there is 48V Phantom Power present on the XLR OUT jack. No battery drain will occur when Phantom Power is present. POWER: This LED indicates the DI PLUS is ready to operate. The POWER LED will illuminate when: A. A plug is inserted into the INPUT jack and there is a fresh battery installed in the DI PLUS. B. A 9VDC adapter (Wall Wart) is plugged into the power jack. (9VDC Regulated Power Supply - 500mA) (2.1MM DC Power Plug, Center +) C. There is 48V phantom power on the XLR cable plugged into the XLR OUT jack. (The 48V LED and the POWER LED will both be illuminated.) XLR OUT: Plug a standard XLR cable from your PA or recording console into this low impedance balanced output. Use the "XLR LEVEL" control to set the output level which matches up best with your PA or recording gear and gives you the least amount of noise. If your board provides 48V phantom power on the XLR cables, the DI Plus will run from this and save the battery. It is suggested that you keep a battery in the unit as a backup when using the phantom power. If the phantom power drops, the DI Plus will automatically switch to battery power. LINE OUT: This is a standard unbalanced line level output signal. Use the "LINE LEVEL" control to adjust the signal level on this jack. This output can be used simultaneously with the XLR OUT jack for some creative signal routing. Plug a standard instrument cable from this output to a stage monitor amp or unbalanced Mic input on a mixer.

Column Power 180 W RMS - 360 W max. Nominal impedance 6 ohm Boomer: 6 x 3" Tweeter: 1 x 1" Dispersion: 120° x 30° (H x V) Connector: slot-in integrated into the subwoofer Dimensions: 103 x 750 x 100 mm x 2 Net weight: column 3.75 kg / spacer: 2.1 kg Subwoofer Power: 250 W RMS - 500 W max. Nominal impedance: 4 ohm Woofer: 1 x 10" Dimensions: 389 x 626 x 626 mm Net weight: 21.8 kg Complete system Frequency response: 38 Hz - 18 kHz Max. SPL (@ 1m): 122 dB Amplifier module Low frequencies 1 x 300 W RMS / 600 W max Mid/High frequencies 1 x 300 W RMS / 600 W max

Track list: intro - tribute to low frequencies blame it on the bass line la calma del re vibe teleumanita' sushi clima we loose control anelli urban cowboy bass player day ghoul uragano ghoul -reprise perfetto, come nuovo

Vendo Mixer della Proel 8 canali completo di cavi e valigetta originale. Con l'acquisto vi regalo anche 5 spinotti di conversione jack audio. Perfetto per chi ha uno studio a casa, per chi suona live o per chi - come me - fa livello streaming, questo mixer è così caratterizzato: - Tipo sistema: Mixer con effetto 8 ingressi - Alimentazione: Alimentatore 18 V - 700 mA AC dedicato incluso - Alimentazione Phantom: + 48 V su tutti gli ingressi mono - Connettori di ingresso: Mic Input Balanced XLR-F - Combo Line Input Balanced TRS Jack - Ingressi: 6 MIC - 4 Line - 2 stereo line - Sensibilità ingresso: Mic Input from 0 to -60 dB - Line Input from +20 to -40 dB - Impedenza di ingresso: Mic Input 2 Kohm Line Input 10 Kohm - Connettori di uscita: Balanced TRS Jack and / or XLR-M - Uscite: CROOM - MAIN MIX - ALT 3-4 - AUX 1 & 2 - PHONES - Equalizzazione canale ingresso mono: Lo Cut 75 Hz, 18 dB/oct. HIGH (shelving) ±15 dB at 12KHz MID (peaking) ±15 dB at 2.5KHz LOW (shelving) ±15 dB at 80Hz - Equalizzazione canale ingresso stereo: HIGH (shelving) ±15 dB at12KHz MID (peaking) ±15 dB at 2.5KHz LOW (shelving) ±15 dB at 80Hz - Effetti incorporati: HALL, ROOM, VOCAL and PLATE reverbs, MONO, STEREO and TAP DELAY, CHORUS and FLANGER, REV + DELAY, REV + CHORUS and REV + FLANGER 16 step PRESET selector 16 step VARIATION selector PEAK LED MUTE and TAP DELAY switch with LED indicator and footswitch... Essendo stato trattato benissimo vi consiglio altamente l'acquisto di questo mixer 8 canali della Proel. Rimango a disposizione per fornirvi ulteriori foto ed informazioni.

Causa inutilizzo vendo impianto audio professionale cosi composto: 2 casse passive TOA mod. 380 SE - 3 vie - woofer da 15'' + tromba medi + tweeter (vedi caratteristiche sotto allegate) perfette - originali - mai riparate - 380 watt rms - mede in Canada (USA) + finale di potenza TOA P 150 D - 180 + 180 watt su 8 ohm - perfetto ed originale - una macchina superaffidabile - Se devi fare un impianto fisso in una sala da ballo media - o un impianto di ottima qualita audio fa un grande affare. L'impianto NON è vendibile separatamente - ed è perfettamente funzionante ed originale- Fatto controllare da laboratorio specializzato a Torino Dato il peso degli oggetti NON è possibile la spedizione - Le foto sono reali degli oggetti in vendita - NO perditempo - NON trattabile - NO scambi merce - no cercatori di foto - se sei realmente interessato contattami al cellulare 347 0083722 Annuncio visibil = merce disponibile Caratteristiche tecniche delle casse Enclosure: Vented (bass reflex) type Speakers: Low Frequency, 15" woofer Mid Frequency, CD Horn plus compression driver High Frequency, Horn tweeter Power Handling Capacity Continuous Pink Noise: 120 watts RMS of band-limited pink noise (50 Hz~20 kHz) Continuous Program: 360 watts Impedance: 8 ohms Sensitivity: 102 dB (1W/1m) Input Panel Frequency Response: 50 Hz~20 kHz Crossover Frequencies: 800 Hz, 8 kHz High and Mid Frequencies Level Controls: 0~ –10 dB (with an "OFF" position) Input Terminals: ¼" Phone jacks for a full-range, biamp, triamp and chaining Finish (Enclosure): Polyester in grey color Dimensions: 758(H)X498(W)X410(D)-mm 29.8(H)X19.6(W)X16.1(D) inches Weight: 36 kg (79.2 Ibs)

Causa inutilizzo vendo impianto audio professionale cosi composto: 2 casse passive Toa/Onkyo mod. 380 SE - 3 vie - woofer da 15'' + tromba medi + tweeter (vedi caratteristiche sotto allegate) perfette - originali - mai riparate - 380 watt rms - mede in Canada (USA) + finale di potenza Toa/ Onkyo P 150 D - 180 + 180 watt su 8 ohm - perfetto ed originale - una macchina superaffidabile - Se devi fare un impianto fisso in una sala da ballo media - o un impianto di ottima qualita audio fa un grande affare. L'impianto NON è vendibile separatamente - ed è perfettamente funzionante ed originale- Fatto controllare da laboratorio specializzato a Torino Dato il peso degli oggetti NON è possibile la spedizione - Le foto sono reali degli oggetti in vendita - NO perditempo - NON trattabile - NO scambi merce - no cercatori di foto - se sei realmente interessato contattami al cellulare 347 0083722 Annuncio visibil = merce disponibile Caratteristiche tecniche delle casse Enclosure: Vented (bass reflex) type Speakers: Low Frequency, 15" woofer Mid Frequency, CD Horn plus compression driver High Frequency, Horn tweeter Power Handling Capacity Continuous Pink Noise: 120 watts RMS of band-limited pink noise (50 Hz~20 kHz) Continuous Program: 360 watts Impedance: 8 ohms Sensitivity: 102 dB (1W/1m) Input Panel Frequency Response: 50 Hz~20 kHz Crossover Frequencies: 800 Hz, 8 kHz High and Mid Frequencies Level Controls: 0~ –10 dB (with an "OFF" position) Input Terminals: ¼" Phone jacks for a full-range, biamp, triamp and chaining Finish (Enclosure): Polyester in grey color Dimensions: 758(H)X498(W)X410(D)-mm 29.8(H)X19.6(W)X16.1(D) inches Weight: 36 kg (79.2 Ibs)

Behringer Ultragraph Pro FBQ1502 Equalizzatore rack stereo a 15 bande, uscita sub, ricerca feedback, low cut, silenzioso, perfetto. Vendo 65€. 110€ se abbinato al case a 3 unitá. Solo case 50€. Caratteristiche tecniche: -Professional 15-band stereo graphic equalizer for live and studio applications -Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer -Dedicated mono subwoofer output with adjustable crossover frequency -Additional low-cut filter removes unwanted frequencies, e.g. floor rumble -Highly accurate 4-segment LED output metering and input gain controls for easy level setting -Ultra-low noise audio operational amplifiers for highest signal integrity -Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors -Shielded toroidal power transformer for ultra-low noise performance -3-Year Warranty Program* -Designed and engineered in Germany