-
loading
Solo con l'immagine

Recommended load impedance


Elenco delle migliori vendite recommended load impedance

LOAD
  • Load
  • Metallica
  • (2LP)
[Di più]
Vedi prezzi in Amazon
LOAD
  • Load
  • Metallica
  • Cd
[Di più]
Vedi prezzi in Amazon
LOAD
  • Load
  • Metallica
  • Cd
[Di più]
Vedi prezzi in Amazon
Firenze (Toscana)
Vendo in perfette condizioni estetiche e funzionali con la relativa scatola. Boss HF-2 HiBand Flanger The HF-2 is combining the original signal with a delayed signal that is shifted one octave up to create a flanging effect a bit different but still similar to the BF-2. The effect is brighter and cleaner than the BF-2. The HF-2 may not be as powerful as the BF-2, but for hi frequency flanging it produces a very good result. Production of the HF-2 moved from Japan to Taiwan mid 1989. Specifications Controls: Manual, Depth, Rate, Res Connectors: Input, Output, AC Adaptor Current Draw: 15 mA (DC 9V) Weight: 400 g (14 oz.) Input Impedance: 470 kOhm Residual Noise Level: -95dBu (IHF-A) Recommended Load Impedance: 10kOhm or greater Delay Time: 0.5 ms ~ 6.5 ms LFO Speed: 100 ms ~ 16 s Recommended AC Adaptor: ACA Series
50 €
Vista prodotto
Italia (Tutte le città)
Marchio: Boss Categoria: Pedali Riverbero Suono di qualità da studio con conversione AD/DA a 32-bit, elaborazione a 32-bit in virgola mobile e frequenza di campionamento di 96 kHz 12 modalità con 21 tipi di riverbero, tutti modificabili dettagliatamente Include una vasta scelta di tipi di riverbero, dagli effetti standard a quelli più avanzati, oltre a classici Roland come l’SRV-2000 Reverb e RE-201 Space Echo Il modo A/B Simul vi consente di usare due patch di riverbero contemporaneamente La funzione “carryover” selezionabile permette alle code del riverbero di proseguire quando cambiate patch o ponete l’effetto in bypass Il potente DSP fornisce un delay digitale con modulazione indipendente, insieme ad ogni patch di riverbero LCD grafico e potenti opzioni di controllo in tempo reale 297 memorie interne per le patch e pratici controlli a portata di mano Funzionamento con “buffered-bypass” o “true-bypass” selezionabile Ingresso/uscita MIDI per interfacciarsi con dispositivi di controllo MIDI USB-MIDI per la connessione con l’RV-500 Editor/Librarian o una DAW Funziona con quattro batterie AA o un trasformatore in CA della serie PSA Frequenza di Sampling: 96 kHz Conversione AD/DA: 32 bit Nominal Input Level INPUT A/MONO, B: -10 dBu Maximum Input Level INPUT A/MONO, B: +8 dBu Input Impedance INPUT A/MONO, B: 1 M ohm Nominal Output Level OUTPUT A/MONO, B: -10 dBu Maximum Output Level OUTPUT A/MONO, B: +8 dBu Output Impedance OUTPUT A/MONO, B: 2 k ohms Recommended Load Impedance OUTPUT A/MONO, B: 20 k ohms or greater Bypass Buffered bypass or True bypass (with relays) INPUT (A/MONO, B) jacks, OUTPUT (A/MONO, B) jacks: 1/4-inch phone type CTL 1,2/EXP jack: 1/4-inch TSR phone type USB COMPUTER port: USB type B MIDI (IN, OUT) connectors DC IN jack
Vista prodotto
Roma (Lazio)
Giradischi AKAI AP001C dotato di nuova testina Audio Technica AT-95E - nuova cinghia di trasmissione & manuale istruzioni originale - Caratteristiche Tecniche: Piatto: pressofusione di alluminio 300 mm - Sistema di azionamento: trasmissione a cinghia - Motore: motore sincrono a 4 poli - Velocità: 33 e 45 giri - Wow e flutter: 0,06% wrms - Rapporto segnale-rumore: migliore di 50 dB - Braccio: tipo statico bilanciato, braccio tubolare in acciaio inox con cancellatore di forza interno e bilanciamento laterale - Lunghezza del braccio: 220mm - Intervallo di peso della cartuccia: da 4 a 10 g (da 10 a 15 g con sotto peso) - Braccio sollevatore: olio inumidito - Sporgenza: 15mm - Peso testina: 8 g - Dimensioni: 440 x 140 x 350 mm (LxHxP) - Peso: 6,3 kg - Testina Audio Technica AT-95E: L'AT95 E è una testina a Magnete Mobile (MM) che fornisce uno straordinario rapporto qualità-prezzo e prestazioni globali straordinarie su sistemi di fascia bassa e media, grazie al suo stilo di tipo ellittico e al sistema a doppio magnete. Eccezionali capacità di tracciamento, suono brillante. Caratteristiche tecniche Frequency Response: 20 - 20,000 Hz Channel Separation: 20 dB at 1kHz Channel Balance: 2.0dB Tracking Force: 1.5-2.5g Vertical Tracking Angle: 20° Recommended Load Impedance: 47,000 ohms Output Voltage: 3.5 mV (mV at 1 kHz, 5 cm/sec) Stylus Shape: Elliptical Stylus construction: Bonded Round Shank Mount: Half-inch Weight: 5.7g Replacement Stylus: ATN95E
150 €
Vista prodotto
Treviso (Veneto)
McIntosh MC-2205 Amplificatore finale 200+200 watt, 400 Watt bridge 220 Volt AC Ben Tenuto e Funzionante no spedizione solo ritiro in locazione Descrizione Scheda Tecnica: Output: - stereo: 200W+200W (Output power) 14.1VRMS (at the time of a 1-ohm load intensity) 20.0VRMS (at the time of a 2-ohm load intensity) 28.3VRMS (at the time of a 4-ohm load intensity) 40.0VRMS (at the time of an 8-ohm load intensity) - mono: 400W (Output power) 14.1VRMS (at the time of a 0.5-ohm load intensity) 20.0VRMS (at the time of a 1-ohm load intensity) 28.3VRMS (at the time of a 2-ohm load intensity) 40.0VRMS (at the time of a 4-ohm load intensity) Output load impedance: - stereo: 1 ohm, 2ohm, 4ohm, 8ohm - mono: 0.5 ohm, 1ohm, 2ohm, 4ohm Output-power band: 20Hz - 20kHz THD (at the time of both ch(es) drive): 0.1% or less (Outputs 0.25W-200W, 20Hz - 20kHz) Cross modulation distortion: 0.1% or less (at the time of an Output power) Frequency characteristic (at the time of 1W output): - 20Hz-20kHz+0 -0.25 dB - 10Hz-100kHz+0 -3.0 dB SN ratio: 95dB or more (at the time of an Output power) Output voltage: 25V Dumping factor: - stereo: 16 (at the time of a 1-ohm load intensity) 50 (at the time of a 2-ohm load intensity) 30 (at the time of a 4-ohm load intensity) 16 (at the time of an 8-ohm load intensity) - mono: 16 (at the time of a 0.5-ohm load intensity) 50 (at the time of a 1-ohm load intensity) 30 (at the time of a 2-ohm load intensity) 16 (at the time of a 4-ohm load intensity) Input sensitivity/impedance: 0.75V, 2.5V/100kohm The semiconductor used: - Silicon transistor: 49 pieces - Silicon diode: 45 pieces - IC: Eight pieces Power source: 120V, 50Hz/60Hz Power consumption: - 70W (at the time of a non-signal) - 550W (at the time of a maximum rating output) Dimensions: - Front panel: Width 411.2x181mm in height - Main unit: Width 381x height 166.7x depth of 368.3mm Weight: 38.6kg / 44.0kg
2.200 €
Vista prodotto
Roma (Lazio)
Vendo (non scambio) pedaliera Zoom G9.2tt, oggetto pari al nuovo, utilizzata inizialmente in casa e poi abbandonata da una parte, anche con la scatola originale - Roma sud SPECIFICATIONS Effect Types: 120 Effect Modules: 10 Maximum Simultaneous Effects: 10 Patch Memory: User 100 + Preset 100 Sampling Frequency: 96kHz A/D Conversion: 24-bit, 64 times over-sampling D/A Conversion: 24-bit, 128 times over-sampling Signal Processing: 32-bit Frequency response: 20Hz-40kHz+1.0dB, -3.0dB(10kôload) Guitar Input: 1/4" phone jack (Rated input level: -10dBm, Input impedance: 1Mô) AUX Input: 1/8" stereo phone jack (Rated input level: -10dBm, Input impedance: 10kô) External Return: 1/4" phone jack (Rated input level: -10dBm / +4dBm) Line Output (L/MONO, R): 2 x 1/4" phone jack(Rated output level: -10dBm / +4dBm, Maximum output level: +19dBm, Output load impedance: 10kô or more, Output Impedance: 1kô or less) Headphone Output: 1/4" stereo phone jack (Rated output: 60mW / 32ô load, 20mW / 300ô load, Output impedance: 47kô) External Send: 1/4" phone jack (Rated output level: -10dBm / +4dBm) Tube Circuitry: 2 x 12AX7 MIDI: IN/OUT USB Interface: 16-bit, 32kHz/44.1kHz/48kHz Display: 2-digit, 7-segment LED, backlit LCD Power Requirements: 15V AC, 1.5A Supplied Accessory: AC adaptor(AD-0012) Dimensions (mm): 595(W)x 235(D)x 85(H) Weight: 5.5kg
Vista prodotto
Chieti (Abruzzo)
Vendo soundstream tatrantula tr 880.2 vero made in usa Soundstream Tarantula Chrome 880/2 Lowpass-Filter / Alipäästö: 30 - 4000 Hz Highpass-Filter / Ylipäästö: 30 - 4000 Hz Subsonic- Filter: 10 - 100 Hz Q - Bass - Boost: 30 / 36 / 44 / 60 Hz Power Bandwidth: 10 Hz - 50 kHz Total Harmonic Distortion: 115 dB Input Topology: Instrumentation Input Sensitivity: 150 mv - 12 Volt RMS Input Impedance: 10 k Ohms Load Impedance (Stereo) 2 - 8 Ohms Load Impedance (Bridged) 4 - 8 Ohms Supply Voltage: 11 - 15 Volts Damping Factor / Vaimennuskerroin: > 500 Slew Rate: >50 V/µS QBASS™: Up to + 12 dB Boost @ 40 Hz, Up to + 18 dB Boost Crossovers: 12 dB / Octave Crossovers Frequency: 30 - 4 kHz Tehonanto RMS: 2 x 220 Watts @ 4 Ohm Tehonanto RMS: 2 x 440 Watts @ 2 Ohm Tehonanto RMS: 1 x 880 Watts @ 4 Ohmiin Sillattuna / Bridged Mitat: L x K x P (312 x 102 x 500mm) gli amplificatori sono ancora installati e perfettamente funzionanti disponibili per qualsiasi prova, li vendo a 350 euro a pezzo
Vista prodotto
Roma (Lazio)
Consolle DJ Traktor S4 in ottime condizioni, usata solo in qualche evento. Vendo per mancanza di utilizzo. Comprende custodia originale, cavo di alimentazione e dati USB, alimentatore supplementare per utilizzo stand-alone, CD con software Traktor Pro 2 originale con serial-key e account online. Specifiche del prodotto: Audio Inputs (A/D) Channels 5 Sample Rate 44.1, 48, 88.2, 96 kHz Bit Resolution 16, 24-bit Converter Cirrus Logic Line Inputs Full Scale Level +12.4 dBu DNR (a-weighted) 98.3 dBu THD+N 0,05 % Frequency Response +/-0.5 dB 20 Hz-40 kHz Cross Talk 1kHz -111dB Mic Input Full Scale Level 1 kHz -31.3 dBu DNR (a-weighted) 1 kHz 85.7 dB THD+N 1KHz 0.045 % Frequency response +/-1.67 dB 20 Hz-20 kHz Phono Inputs Input Impedance 47 KOhm Full Scale Level 1 kHz - 23.5 dBu DNR (a-weighted) 1 kHz 90.2 dB THD+N 1KHz 0,05 % Crosstalk 1kHz -100 dB Audio Outputs (D/A) Channels 4 Sample Rate 44.1, 48, 88.2, 96 kHz Bit Resolution 16, 24-bit Converter Cirrus Logic Line Outputs (1/4" stereo) Maximum Output Level +18 dBu DNR (a-weighted) 105 dB THD+N 0,003 % Frequency Response +/-0.3 dB 20 Hz-40 kHz Crosstalk 1kHz 122 dB Line Outputs (RCA) Maximum Output Level +12 dBu DNR (a-weighted) 105 dB THD+N 0,002% Frequency Response +/-0.35 dB 20 Hz-40 kHz Crosstalk 1kHz -111 dB Headphone Output Load Impedance 16 Ohms â€" 600 Ohms Maximum Output Level (32 Ohm load) +2 dBu DNR (a-weighted) 99.3 dBu THD+N 0.013 % Frequency Response +/-1 dB 20 Hz-20 kHz Crosstalk 1kHz -60
Vista prodotto
Torino (Piemonte)
Vendo per cambio strumentazione testata basso 500W TC Electronic BH500 completa di scatola originale, in ottime condizioni. Specifiche Tecniche INPUT SECTION Input connector: 1/4” jack Input impedance: 1 MOhm / 100 pF Gain range: -96 to 36dB CONTROLLI DEL TONO Bass: Center Freq: 100Hz (Gain: +15/-24dB) Low Mid: Center Freq: 335Hz (Gain: +15/-24dB) High Mid: Center Freq: 900Hz (Gain: +15/-24dB) Treble: Center Freq: 1600Hz Gain: -24 to 0dB; 4000Hz Gain 0 to +15dB Tweeter Tone: 0 to 10, L-PAD Cabinet Recreation Tube Tone: 0 to 10, Tube amp Recreation ALTRO Spectra Comp: 3 band Spectral Compression User Memories: 3 memory locations storing all front panel controls except Mute & Master Level Tuner: Bass Tuner, "On" when muted Tuning range: B0 (30.87Hz) to G4 (392.00Hz) Mute: Mutes speaker out, Phones out and Balanced out Master Level / Headphones Output: Studio quality headphone amp HP Out Impedance: 40 to 600 Ohm Mains supply: 100 - 120V~ or 220 - 240V~ 50/60Hz (65W 1/8 of Max. Output) Power rating: 500W (1000w Peak) Speaker output: Neutrik Speakonâ,,¢ Balanced output: Balanced XLR, Pre/Post Pre-amp Bal. Out Max.: +2dBu Bal. Out Optimal Load Impedance: 600 Ohm Rehearsal input: RCA, Left/Right input, fits to iPod ® Dimensions: 462 x 135 x 380 mm Weight: 13 kg Finish: Tolex covered, handcrafted wooden box
250 €
Vista prodotto
Torino (Piemonte)
Vendo per cambio strumentazione testata basso 500W TC Electronic BH500 completa di scatola originale, in ottime condizioni. Specifiche Tecniche INPUT SECTION Input connector: 1/4” jack Input impedance: 1 MOhm / 100 pF Gain range: -96 to 36dB CONTROLLI DEL TONO Bass: Center Freq: 100Hz (Gain: +15/-24dB) Low Mid: Center Freq: 335Hz (Gain: +15/-24dB) High Mid: Center Freq: 900Hz (Gain: +15/-24dB) Treble: Center Freq: 1600Hz Gain: -24 to 0dB; 4000Hz Gain 0 to +15dB Tweeter Tone: 0 to 10, L-PAD Cabinet Recreation Tube Tone: 0 to 10, Tube amp Recreation ALTRO Spectra Comp: 3 band Spectral Compression User Memories: 3 memory locations storing all front panel controls except Mute & Master Level Tuner: Bass Tuner, "On" when muted Tuning range: B0 (30.87Hz) to G4 (392.00Hz) Mute: Mutes speaker out, Phones out and Balanced out Master Level / Headphones Output: Studio quality headphone amp HP Out Impedance: 40 to 600 Ohm Mains supply: 100 - 120V~ or 220 - 240V~ 50/60Hz (65W 1/8 of Max. Output) Power rating: 500W (1000w Peak) Speaker output: Neutrik Speakonâ„¢ Balanced output: Balanced XLR, Pre/Post Pre-amp Bal. Out Max.: +2dBu Bal. Out Optimal Load Impedance: 600 Ohm Rehearsal input: RCA, Left/Right input, fits to iPod ® Dimensions: 462 x 135 x 380 mm Weight: 13 kg Finish: Tolex covered, handcrafted wooden box
250 €
Vista prodotto
Torino (Piemonte)
:Vendo per inutilizzo coppia di B&W - DM 601 -S 2 colore nero - perfette - suono strepitoso - numero seriale in sequenza. anno 2010 - non ho imballi - assolutamente originali e mai riparate o altro. Caratteristiche tecniche: B&W 601 S3 - 601 S2 - 601 Diffusori due vie Diffusori da scaffale Caratteristiche tecniche 2 vie bass reflex Description: 2-way vented-box system Dimensions Height: 365mm (14.4in) Width: 204mm (8in) Depth: 228mm (9in) Net Weight 6.1kg / 13.4lb Freq. Response 60Hz - 22kHz ± 3dB on reference axis Freq. Range -6dB at 48Hz and 42kHz Sensitivity 88dB spl (2.83V, 1m) Normal Impedance 8 ohms (minimum 3.0 ohms) Power Handling 25W - 100W into 8 ohms on unclipped programme Drive Units Unit 1: 1x 25mm (1in) metal dome high-frequency Unit 2: 1x 165mm (6.5in) woven Kevlar® cone bass/midrange Unit 3: Finish Cabinet: Black Ash or Sorrento (light oak) vinyl Grille: Black Cloth Dispersione Description: Within 2dB of response on reference axis Horizontal: over 40° arc Vertical: over 10° arc Harmonic Distortion 2nd & 3rd harmonics Crossover Frequency 4kHz Max. Recommended Cable Impedance 0.1 ohms __________________________________ IL prezzo indicato NON E TRATTABILE - NO PERDITEMPO - No cercatori di foto - NON scambio con nulla - La spedizione è possibile ma visto la delicatezza e a Vs. rischio e spese - Vi dovete occupare voi dell'imballo e della spedizione - Annuncio visibile = disponibile Per evitare di perdere tempo prima di fare domande rileggete con attenzione l'annuncio grazie 1000 Info 347 0083722 (info telefonare NO email) Luogo di ritiro Torino
350 €
Vista prodotto
Roma (Lazio)
Stupendo finale dynaco st150 75 w rms su 8 ohm vedi specifiche perfetto e stato ricappato e ricablato per tanti anni ancora godrete del suo suono coinvolgente e caldo. Specifications Power output: 75 watts per channel into 8? (stereo) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.25% Damping factor: 50 Input sensitivity: 1V Signal to noise ratio: 95dB Speaker load impedance: 4? to 16? Semiconductors: 24 x transistors, 2 x zener diodes, 16 x diodes, 2 x thermal sensors Dimensions: 14.5 x 13.75 x 7 inches Weight: 29lbs Description The Dynaco Stereo 150 is a two channel power amplifier employing all silicon semiconductors. They include 24 transistors, 2 zener diodes, 16 diodes, and 2 thermal sensors. The output circuitry is of the full complementary symmetry design. The entire amplifier, except for an input network, is direct coupled. It's measured distortion levels approach the threshold of much laboratory test equipment, not only at the commonly specified full power ratings, but more importantly at very low power outputs as well. This is the result of circuit techniques which eliminate any discernible crossover notch at low levels, and contributes to the Stereo 150's freedom from listening fatigue. It's accurate, uncoloured sonics have been achieved on a wide variety of loudspeaker loads, including electrostatics and multiple drivers with complex crossovers. The design of a very fine power amplifier implies the necessity of several protection techniques for the amplifier, and for the speaker load. In addition to the AC line fuse, four separate B+ fuses are supplied. Electronic volt-amp limiting ensures safe operation of the output transistors, and a thermal sensor mounted directly on each output stage reduces the input if high temperature
400 €
Vista prodotto
Teramo (Abruzzo)
Indiana line nota 240 2 vie da scaffale - il prezzo e' riferito a singolo diffusore nuovo con garanzia 2 anni - siamo distributori diffusore acustico da scaffale equipaggiato con woofer da quattro pollici con cono in polipropilene iniettato e tweeter al neodimio con cupola in seta trattata e camera di risonanza posteriore a ventilazione radiale. per interfacciare correttamente il suono con l'acustica dell'ambiente, è possibile controllare il livello delle basse frequenze, inserendo nel condotto reflex posteriore il tampone di spugna in dotazione: solitamente quando il diffusore è collocato in una nicchia. nota 240 x può essere facilmente appeso al muro tramite l'apposito aggancio. caratteristiche: type 2-way loudspeaker enclosure load bass-reflex suggested amplifier 30 - 60 watt amplifier load impedance 4 - 8 ohm frequency range 54 - 22000 hertz sensitivity (2.83 v / 1 m) 89 db drive units 107 mm woofer 26 mm dome tweeter crossover 3000 hertz dimensions 160 x 235 x 160 mm weight 2.2 kg finishes red cherry vinyl or dark grey oak vinyl note nota 240 can be easy hang on the wall by fitted housing. e' disponibile con finitura in vinile noce chiaro o rovere nero. db, sennheiser, shure, akg, beyerdynamic, microfono, wireless, rcf, fbt, meyer sound, montarbo, b&w, bose, jamo, jbl
80 €
Vista prodotto
Italia (Tutte le città)
INDIANA LINE NOTA 240 NUOVO CON GARANZIA 2 ANNI - SIAMO DISTRIBUTORI (il prezzo sopra descritto e' riferito ad singolo diffusore) Diffusore acustico da scaffale equipaggiato con woofer da quattro pollici con cono in polipropilene iniettato e tweeter al neodimio con cupola in seta trattata e camera di risonanza posteriore a ventilazione radiale. Per interfacciare correttamente il suono con l'acustica dell'ambiente, è possibile controllare il livello delle basse frequenze, inserendo nel condotto reflex posteriore il tampone di spugna in dotazione: solitamente quando il diffusore è collocato in una nicchia. Nota 240 X può essere facilmente appeso al muro tramite l'apposito aggancio. Caratteristiche: Type 2-way loudspeaker Enclosure load bass-reflex Suggested amplifier 30 - 60 watt Amplifier load impedance 4 - 8 ohm Frequency range 54 - 22000 hertz Sensitivity (2.83 V / 1 m) 89 dB Drive units 107 mm woofer 26 mm dome tweeter Crossover 3000 hertz Dimensions 160 x 235 x 160 mm Weight 2.2 Kg Finishes red cherry vinyl or dark grey oak vinyl Note Nota 240 can be easy hang on the wall by fitted housing. E' disponibile con finitura in vinile noce chiaro o rovere nero. DB, SENNHEISER, SHURE, AKG, BEYERDYNAMIC, RCF, FBT, MEYER SOUND, MONTARBO, AUDIODESIGN, ELECTRO VOICE, SOUNDCRAFT
Vista prodotto
Catania (Sicilia)
Lettore CD a due telai Rega Jupiter Carica dall'altro meccanica e convertitore separato Analogue output level: 2V RMS 1kHz (minimum load impedance: 10K) Digital input level: 0.5V 75ohm load S/PDIF coaxial Digital sampling frequency: 32KHz, 44.1kHz, 48kHz Telecomando SOLAR Possibilità di ascolto Spedizioni in tutto il mondo. Contatti Cell 3283746218
Vista prodotto
Roma (Lazio)
INDIANA LINE NOTA 240 X Diffusori acustici equipaggiati con woofer da quattro pollici con cono in polipropilene iniettato e tweeter al neodimio con cupola in seta trattata e camera di risonanza posteriore a ventilazione radiale. Per interfacciare correttamente il suono con l'acustica dell'ambiente, è possibile controllare il livello delle basse frequenze, inserendo nel condotto reflex posteriore il tampone di spugna in dotazione: solitamente quando il diffusore è collocato in una nicchia. Nota 240 X può essere facilmente appeso al muro tramite l'apposito aggancio. Suono strepitoso, nitido e corposo nonostante le contenute dimensioni. Minimo ingombro, altri cristallini e bassi profondi! Perfetti sia come diffusori frontali che surround. Colore nero Nuovi imballati con garanzia Euro 190 la coppia Spedisco in Tutta Italia! Emanuele 335 6777429 Type 2-way loudspeaker Enclosure load bass-reflex Suggested amplifier 30 - 60 watt Amplifier load impedance 4 - 8 ohm Frequency range 54 - 22000 hertz Sensitivity (2.83 V / 1 m) 89 dB Drive units 107 mm woofer 26 mm dome tweeter Crossover 3000 hertz Dimensions 160 x 235 x 160 mm Weight 2.2 Kg
190 €
Vista prodotto

Pubblicare Annunci Gratuiti - comprare e vendere usato in Italia | CLASF - copyright ©2024 www.clasf.it.