Active bass units 8

B&W DM604 diffusori Coppia di diffusori frontali da pavimento 3 vie reflex, con 2 woofer da 18cm reflex in alluminio, midrange da 18 cm in kevlar con ogiva e tweeter a cupola metallica da 25mm. Predisposti per bi-wiring. Potenza consigliata 25-200 Watt / 8 ohm Dimensioni 994 x 236 x 394 mm Questo sistema di diffusori è in grado di fornire un suono dettagliatissimo e molto potente. B&W ASW1000 Active Subwoofer Esclusivo subwoofer Hi-End 12" (30 cm) Woofer in bass reflex con tecnologia Flow Port System 22 to 40/140 Hz frequency response with variable low-pass filter Magnetically shielded Line-in / Line out Speaker-level inputs and outputs Dimensioni: 460x540x500 mm. Condizioni come da foto, le griglie di copertura e i cablaggi non sono disponibili, spedizione possibile.

Garanzia 2 anni. Prezzo al pezzo singolo No permuta The 8040A Specifications: Maximum sound pressure level: 105 dB Frequency response: 48 Hz - 20 kHz (± 2 dB), 45 Hz - 21 kHz (-3 dB) Crossover frequency: 3.0 kHz Driver dimension: Bass 6.5 in + Treble 3/4 in metal dome + DCW(TM) Amplifier power: Bass 90 W + Treble 90 W Dimensions: H x W x D 365 x 237 x 223 mm with Iso-Pod(TM) Weight: 8.6 kg (18.9 lb) Connectors: 1 x XLR analog in skype:dsdhomecinema whatz 0041789105968

Vendo per inutilizzo In condizioni estetiche e funzionali perfette. Completo di cavo di alta qualità. Subwoofer amplificato di grande impatto sonoro, adatto per impianti hi-fi stereo e sistemi home cinema (componenti schermati). Fornisce elevate prestazioni in ingombri limitati, grazie al particolare disegno del box: il condotto reflex è posizionato nella parte inferiore del mobile, adeguatamente sagomata per utilizzare la superficie del pavimento come rinforzo delle basse frequenze. Lâ€(TM)amplificatore è dotato di una sezione controlli particolarmente completa, che consente un facile e perfetto interfacciamento con gli altri componenti dellâ€(TM)impianto e con lâ€(TM)ambiente dâ€(TM)ascolto. TECHNICAL DATA: speaker type: active subwoofer enclosure load: bass reflex nominal power: 100 Watt max power: 150 Watt frequency response: 35÷180 Hz crossover frequency: 40÷180 Hz unit: shielded magnet speaker diameter: 210 mm power supply: 220÷240 V (50 Hz) dimensions: 250 x 355 x 380 mm weight: 12.2 Kg design: real wood, cherry colour

1400W + 700W – 137DB SPL ACTIVE PRECISION COVERAGE VERTICAL ARRAY 2-way powered bi-amplified true line array, bass reflex design, internal Digital Signal Processor 1400Wrms LF and 700Wrms HF Class D (PWM) high efficiency integrated amplifier 8 woofer custom al neodimio da 200mm (8’’)50 mm voice coil (2”) 8 x 25 mm (1”) custom neodymium compression drivers and 44 mm voice coil (1.7”) 8 polypropylene waveguide horns with 90° horizontal dispersion 15° vertical dispersion On-board presets allow different equalization configurations, gain and digital delay through the rear control panel Specifications Configuration way: 2 Built-in amplifiers LF/HF (Wrms): 1400/700 Frequency response (-6dB): 58Hz – 18kHz Low frequency woofer (inch): 8 x 8 – 2 coil – neodymium High frequency driver (inch): 8 x 1 – 1,7 coil – neodymium Sensitivity (1W/1m): 105 dB Maximum SPL: 137 dB Dispersion (H x V): 90° x 15° Input impedance (kohm): 22 Crossover frequency (kHz): 1,2 AC Power requirements (VA): 1400 Input connectors: XLR with loop Power cord: 5 / 16,4” (m/ft) Net dimensions (WxHxD – single unit): 713x980x460 / 28,1×38,6×19,3 (mm / inch) Net weight (kg/Lb): 93 / 205,02 Transport dimensions (WxHxD – 2 units on pallet): 750x1400x1100 / 29,5×55,1×43,3 (mm / inch) Transport weight (2 units on pallet): 210 / 462,97 (kg/Lb) PRODOTTO USATO: CONDIZIONI OTTIME

DI Plus Read user experiences here. "The ULTRASOUND DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after our famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power. (Originally called ULTRA PDI.) INSTRUMENT INPUT: This input is designed for all passive and active type pickup signals. When a plug is inserted, the 9V battery is switched on. INSTRUMENT OUTPUT: This is a "parallel" jack which can be used to send the "guitar/instrument signal" to an external tuner, guitar amp or other device which can use an instrument level signal. EFX LOOP: This is a real world "EFX LOOP". In an effort to save room, most of our competition uses a TRS jack (tip, ring, sleeve) and Y cable type system. The DI+ is provided with two 1/4" jacks, one for "SEND" and one for "RETURN". Since the EFX LOOP interrupts the signal path it can be used as an insert point for a volume pedal, compressor, or tuner, if the tuner is equipped with a bypass switch. (Try that with one of our competitors units) SEND: The signal on the SEND jack is post-input gain and pre EQ. This means that you can use the SEND signal as an auxiliary unbalanced direct output. This signal is not affected by any of the panel controls with exception of the "INPUT GAIN" control. RETURN: A plug inserted into the RETURN jack will interrupt the signal path. The signal on the tip of the plug inserted into the RETURN jack will be the signal that the DI Plus will process. INPUT GAIN: The "INPUT GAIN" is not a volume control, rather this control sets the level of amplification applied to the input signal to boost it to a useable level. The reason this is adjustable is to accommodate a wide range of pickup devices. BASS: This is an "Active" control. The BASS control adjusts the amount of cut or boost in the low frequency (150HZ) range. TREBLE: This is an "Active" control. The TREBLE control adjusts the amount of cut or boost in the high frequency (5kHZ) range. NOTCH FILTER: ON/OFF - Enables or disables the NOTCH FILTER control. FREQ. HZ - Sets the frequency (100-350HZ) of the 18db cut NOTCH FILTER that is used to control resonant feedback. SHAPE: ON/OFF - This toggle switch enables or disables the SHAPE control. This control is a mid dip control. In the ON position, the mid frequencies will be cut and the high and low frequencies will be boosted. PHASE: IN/OUT - Changes the polarity of the signal. Phase affects the way the guitar top is pressurized by the loudspeakers. When the signals are out of phase with each other, low-end feedback is minimized. If you experience ⤽positive acoustic⤝ feedback on stage, flip the phase switch from its current setting to see if this will kill the feedback. If inverting phase alone does not eliminate feedback, the notch filter can be used. Phase will also affect the way the guitar signal mixes live and when recording. XLR LEVEL: This control adjusts the amount of signal sent to the XLR OUT jack. LINE LEVEL: This control adjusts the amount of signal sent to the LINE OUT jack. 48V: (Phantom Power) This LED lights when there is 48V Phantom Power present on the XLR OUT jack. No battery drain will occur when Phantom Power is present. POWER: This LED indicates the DI PLUS is ready to operate. The POWER LED will illuminate when: A. A plug is inserted into the INPUT jack and there is a fresh battery installed in the DI PLUS. B. A 9VDC adapter (Wall Wart) is plugged into the power jack. (9VDC Regulated Power Supply - 500mA) (2.1MM DC Power Plug, Center +) C. There is 48V phantom power on the XLR cable plugged into the XLR OUT jack. (The 48V LED and the POWER LED will both be illuminated.) XLR OUT: Plug a standard XLR cable from your PA or recording console into this low impedance balanced output. Use the "XLR LEVEL" control to set the output level which matches up best with your PA or recording gear and gives you the least amount of noise. If your board provides 48V phantom power on the XLR cables, the DI Plus will run from this and save the battery. It is suggested that you keep a battery in the unit as a backup when using the phantom power. If the phantom power drops, the DI Plus will automatically switch to battery power. LINE OUT: This is a standard unbalanced line level output signal. Use the "LINE LEVEL" control to adjust the signal level on this jack. This output can be used simultaneously with the XLR OUT jack for some creative signal routing. Plug a standard instrument cable from this output to a stage monitor amp or unbalanced Mic input on a mixer.

DI Plus Read user experiences here. "The ULTRASOUND DI Plus is a very powerful tool for any musician. This is not only a DI but a full featured preamp designed after our famous AG-series amps. Whether at a local open mic night or at a major concert venue, you will be able to dial in the clear natural acoustic sound that our amplifiers are known for, and route it to the stage PA through a balanced XLR output. Sound engineers will appreciate the versatile controls and the optional 48-volt phantom power operation. Therefore, no more wall warts or batteries if your mixer has phantom power. (Originally called ULTRA PDI.) INSTRUMENT INPUT: This input is designed for all passive and active type pickup signals. When a plug is inserted, the 9V battery is switched on. INSTRUMENT OUTPUT: This is a "parallel" jack which can be used to send the "guitar/instrument signal" to an external tuner, guitar amp or other device which can use an instrument level signal. EFX LOOP: This is a real world "EFX LOOP". In an effort to save room, most of our competition uses a TRS jack (tip, ring, sleeve) and Y cable type system. The DI+ is provided with two 1/4" jacks, one for "SEND" and one for "RETURN". Since the EFX LOOP interrupts the signal path it can be used as an insert point for a volume pedal, compressor, or tuner, if the tuner is equipped with a bypass switch. (Try that with one of our competitors units) SEND: The signal on the SEND jack is post-input gain and pre EQ. This means that you can use the SEND signal as an auxiliary unbalanced direct output. This signal is not affected by any of the panel controls with exception of the "INPUT GAIN" control. RETURN: A plug inserted into the RETURN jack will interrupt the signal path. The signal on the tip of the plug inserted into the RETURN jack will be the signal that the DI Plus will process. INPUT GAIN: The "INPUT GAIN" is not a volume control, rather this control sets the level of amplification applied to the input signal to boost it to a useable level. The reason this is adjustable is to accommodate a wide range of pickup devices. BASS: This is an "Active" control. The BASS control adjusts the amount of cut or boost in the low frequency (150HZ) range. TREBLE: This is an "Active" control. The TREBLE control adjusts the amount of cut or boost in the high frequency (5kHZ) range. NOTCH FILTER: ON/OFF - Enables or disables the NOTCH FILTER control. FREQ. HZ - Sets the frequency (100-350HZ) of the 18db cut NOTCH FILTER that is used to control resonant feedback. SHAPE: ON/OFF - This toggle switch enables or disables the SHAPE control. This control is a mid dip control. In the ON position, the mid frequencies will be cut and the high and low frequencies will be boosted. PHASE: IN/OUT - Changes the polarity of the signal. Phase affects the way the guitar top is pressurized by the loudspeakers. When the signals are out of phase with each other, low-end feedback is minimized. If you experience “positive acoustic” feedback on stage, flip the phase switch from its current setting to see if this will kill the feedback. If inverting phase alone does not eliminate feedback, the notch filter can be used. Phase will also affect the way the guitar signal mixes live and when recording. XLR LEVEL: This control adjusts the amount of signal sent to the XLR OUT jack. LINE LEVEL: This control adjusts the amount of signal sent to the LINE OUT jack. 48V: (Phantom Power) This LED lights when there is 48V Phantom Power present on the XLR OUT jack. No battery drain will occur when Phantom Power is present. POWER: This LED indicates the DI PLUS is ready to operate. The POWER LED will illuminate when: A. A plug is inserted into the INPUT jack and there is a fresh battery installed in the DI PLUS. B. A 9VDC adapter (Wall Wart) is plugged into the power jack. (9VDC Regulated Power Supply - 500mA) (2.1MM DC Power Plug, Center +) C. There is 48V phantom power on the XLR cable plugged into the XLR OUT jack. (The 48V LED and the POWER LED will both be illuminated.) XLR OUT: Plug a standard XLR cable from your PA or recording console into this low impedance balanced output. Use the "XLR LEVEL" control to set the output level which matches up best with your PA or recording gear and gives you the least amount of noise. If your board provides 48V phantom power on the XLR cables, the DI Plus will run from this and save the battery. It is suggested that you keep a battery in the unit as a backup when using the phantom power. If the phantom power drops, the DI Plus will automatically switch to battery power. LINE OUT: This is a standard unbalanced line level output signal. Use the "LINE LEVEL" control to adjust the signal level on this jack. This output can be used simultaneously with the XLR OUT jack for some creative signal routing. Plug a standard instrument cable from this output to a stage monitor amp or unbalanced Mic input on a mixer.

Podspeakers Micropod SE Speaker Passivo Diffusore di altissimo design con cabinet in vetroresina. Speaker passivi, 2 vie bass reflex, compatibili con ampli da 10 a 100 W su 4 ohm. Collega il tuo Smartphone, iPod, iPad, iPhone, Tablet, PC, MAC, TV, PlayStation o Hi-Fi stereo. - 2 vie bass reflex - woofer in kevlar da 3" e tweeter da 3/4"k - 65-20.000 Hz - 86 db - 4 Ohms - compatibile con amplificatori da 10 a 100 w rms - ideale per applicazioni audiovideo -può essere amplificata anche abbinata ad una  MICROPOD SE ACTIVE. Specifiche System 2.0 fully active multimedia speaker system Amplifier output 2 x 10 Watts RMS, 6 ? Frequency response 20 - 20.000 Hz (± 1.0 dB) Input AUX, 3 1/2 mm, minijack Output SUB OUT, 3 1/2 mm, minijack Power supply 100 VAC - 240 VAC (external), Auto Standby Drive units 1 x 3" (75mm) woofer with Kevlar cone 1 x 3/4 " (19mm) soft dome tweeter Weight 1,0 kg

Vendo per inutilizzo Subwoofer JBL Attivo come nuovo,qualsiasi prova. Le specifiche: Active Subwoofer Section Low Frequency Cut-off: 35Hz High Frequency Cut-off: 40Hz - 160Hz Variable Built-In Amplifier Power: 100 Watts RMS Drive Units: 200mm Paper Cone Long Throw Driver Bass Reflex Enclosure Dimensions (H x W x D): 450mm x 250mm x 360 mm Weight: 13.6kg

Vendo casse B&W DM550 come nuove, per inutilizzo. Sotto trovate le principali caratteristiche. Viste le dimensioni ed il peso scambio a mano su Torino. Frequency Range: 56 Hz to 30 kHz (-6 dB points) Bass Loading: Second-order closed box alignment Frequency Response: 75 Hz – 20 kHz, ±2,5 dB on reference axis Dispersion: 20 Hz to 15 kHz Vertical: ±2 dB over 10° arc Horizontal: ±2 dB over 40° arc Sensitivity: 87 dB (2,83 V/ 1 m) Distortion (For 90 dB at 1 m) Second Harmonic: Less than 3% at 20 Hz to 200 Hz Less than 1% at 200 Hz to 20 kHz Third Harmonic: Less than 2% at 20 Hz to 200 Hz Less than 1% at 200 Hz to 20 kHz Impedance: Nominal 8 Ω (not faling below 4 Ω) Crossover: third-order acoustic response low-pass and high-pass Drive Units: 1 x 26mm high-frequency with aluminium dome, One 26mm coil on aluminium former, wound with polymide resin and heat cured 1 x 160mm bass/midrange with composite short fibre, 26mm coil on high temperature former, wound with polymide resin and heat cured Power Handling: Suitable for amplifiers with 10 W to 75 W output Dimensions (H x W x D): 352 x 204 x 243 mm (13-7/8" x 8" x 9-1/2") Weight: 5,5 kg (12 lbs)

ROYD ENVOY In Perfette ed eccellenti condizioni, senza segni e perfettamente funzionanti. Attualmente in uso con un setup completo Leak Stereo 20 e pre Leak Point One Stereo. Bellissime esteticamente. Caratteristiche prese dal sito Royd Audio: Dimensions (WxHxD) 203mm x 305mm x 187mm Recommend Amplifier Power 20 to 80 watts Sensitivity 87 dB 1 watt AT 1 metre Power Handling 100 watts Nominal Impedance 8 ohms Drive Units 1 Royd cast chassis 5" bass/mid unit and 1 Royd 18mm dome/cone tweeter Crossover Frequency 4 KHz Bass Resonance Frequency 43 Hz Frequency Range 38 Hz to 20KHz Rosenut veneer, Cherry veneer, Black Ash veneer, Black Ash vinyl 8.2 Kg Spedizione possibile con pacco standar tracciabile a carico e rischio acquirente. Non scambio ma Vendo

:Vendo per inutilizzo coppia di B&W - DM 601 -S 2 colore nero - perfette - suono strepitoso - numero seriale in sequenza. anno 2010 - non ho imballi - assolutamente originali e mai riparate o altro. Caratteristiche tecniche: B&W 601 S3 - 601 S2 - 601 Diffusori due vie Diffusori da scaffale Caratteristiche tecniche 2 vie bass reflex Description: 2-way vented-box system Dimensions Height: 365mm (14.4in) Width: 204mm (8in) Depth: 228mm (9in) Net Weight 6.1kg / 13.4lb Freq. Response 60Hz - 22kHz ± 3dB on reference axis Freq. Range -6dB at 48Hz and 42kHz Sensitivity 88dB spl (2.83V, 1m) Normal Impedance 8 ohms (minimum 3.0 ohms) Power Handling 25W - 100W into 8 ohms on unclipped programme Drive Units Unit 1: 1x 25mm (1in) metal dome high-frequency Unit 2: 1x 165mm (6.5in) woven Kevlar® cone bass/midrange Unit 3: Finish Cabinet: Black Ash or Sorrento (light oak) vinyl Grille: Black Cloth Dispersione Description: Within 2dB of response on reference axis Horizontal: over 40° arc Vertical: over 10° arc Harmonic Distortion 2nd & 3rd harmonics Crossover Frequency 4kHz Max. Recommended Cable Impedance 0.1 ohms __________________________________ IL prezzo indicato NON E TRATTABILE - NO PERDITEMPO - No cercatori di foto - NON scambio con nulla - La spedizione è possibile ma visto la delicatezza e a Vs. rischio e spese - Vi dovete occupare voi dell'imballo e della spedizione - Annuncio visibile = disponibile Per evitare di perdere tempo prima di fare domande rileggete con attenzione l'annuncio grazie 1000 Info 347 0083722 (info telefonare NO email) Luogo di ritiro Torino

Descrizione Vendo per inutilizzo coppia di B&W - DM 601 -S 2 colore nero - perfette - suono strepitoso, assolutamente originali Caratteristiche tecniche: B&W 601 S3 - 601 S2 - 601 Diffusori due vie Diffusori da scaffale Caratteristiche 2 vie bass reflex Caratteristiche: Description 2-way vented-box system Dimensions Height: 365mm (14.4in) Width: 204mm (8in) Depth: 228mm (9in) Net Weight 6.1kg / 13.4lb Freq. Response 60Hz - 22kHz ± 3dB on reference axis Freq. Range -6dB at 48Hz and 42kHz Sensitivity 88dB spl (2.83V, 1m) Normal Impedance 8 ohms (minimum 3.0 ohms) Power Handling 25W - 100W into 8 ohms on unclipped programme Drive Units Unit 1: 1x 25mm (1in) metal dome high-frequency Unit 2: 1x 165mm (6.5in) woven Kevlar® cone bass/midrange Unit 3: Finish Cabinet: Black Ash or Sorrento (light oak) vinyl Grille: Black Cloth Dispersione Description: Within 2dB of response on reference axis Horizontal: over 40° arc Vertical: over 10° arc Harmonic Distortion 2nd & 3rd harmonics

B&W SCM 8 - HT surround da parete - I monitor Surround Cinema hanno un aspetto e un design unico - Sono dipoli,quindi il suono è proiettato lungo due assi opposti con polarità opposta. Il motivo di questo è la desiderata non localizzazione del suono surround. Gli altoparlanti sono posizionati ad ogni lato dell'ascoltatore con il piano nullo che punta verso l'ascolto, ciò significa che la vastità del suono è riflessa dalle superfici della stanza ed è diffusa in natura. Un ulteriore vantaggio dell' Home THX è nella transizione senza soluzione di continuità tra i campi,anteriori e surround, sonori indipendenti dalla posizione relativa degli altoparlanti - quindi una molteplicità di ascoltatori può sentire il campo sonoro complessivo, e sperimentare la natura dispersiva del suono. La costruzione triangolare di questi diffusori ha diversi vantaggi, funzionali come pure estetici, in primis la forma triangolare riduce i livelli di onde permanenti all'interno del cabinet in modo da irradiare il suono senza colorazione - Description: Wall mounting second-order closed-box system with dipolar radiation - Characteristics: Drive units: 2 x 25mm dome high-frequency unit with metal diaphragms, high power voice coils and magnetic fluid cooling - 2 x 160mm Kevlar bass/mid - Frequency response: 105Hz - 25kHz ± 6dB on reference - Frequenza xover: 3KHz - Sensitivity: 87dB spl (2.83V 1m) - Nominal impedance: 4 ohms - Power handling: 50W - 200W into 8 ohms on unclipped programme - Dimensioni: Height: 362mm; Width: 352mm; Depth: 251mm - Peso: 14 Kg. cad. Finishes: Black Ash - Grille: Black Cloth - Asportabili n. 4 x diffusore - Note: Magneti schermati, Conforme e certificato THX - Struttura interna Matrix - Prezzo di listino nel 1994 era di £: 3.400.000 - Perfetto funzionamento - *informazioni esclusivamente per contatto telefonico *

Vendo diffusore kef hts 3001 acquistato da circa 2 anni in perfetto stato. Design 2-way bass reflex Drive Units 115mm (4.5in.) Uni-Q array with 19mm (0.75in.) aluminium HF Crossover Frequencies 2.2kHz Sensitivity (2.83V/1m) 88dB Frequency Response (+/-3dB) 70Hz - 55kHz Maximum Output 108dB Input Impedance 8 Ohms Magnetic Shielding Yes Internal Volume 1.8 litres Power Handling 100W Weight 2.0kg (4.4lbs) Dimensions (H x W x D) 245 x 125 x 150 mm (9.6 x 4.9 x 5.9 in.) prezzo 100 euro. Preferibile consegna a mano

Diffusore centrale a tre vie KEF Q10c di alto livello. Perfettamente funzionante, esteticamente così come visibile in foto. Preferirei non spedire. Specification: System type: Three-way, TV/shelf-mount Enclosure type: Reflex Dimensions (H x W x D): 160 x 552 x 250mm Weight: 7.7kg Nominal impedance: 8 ohms Amplifier Requirements: 15-150W Frequency response: 45Hz to 27kHz +/-3.0dB Sensitivity: 91dB at 1m for 2.83V Maximum output: 112dB Finish: Black Ash, Maple or Dark Apple System: SP3427 Drive units: 2 x B130 Bass unit (SP1521), B130 Uni-Q (SP1519) [NT19 HF unit (SP1487)] Crossover network: SP2448