Installation validation manager technical

Azienda leader nella progettazione e produzione di macchinari per il settore farmaceutico   ci ha incaricato di ricercare un/una   installation & validation manager/ technical services coordinator (rif. smiv/19hl)   che dovrà organizzare, supervisionare e coordinare le attività di installazione, validazione, commissioning e training al cliente relativamente agli impianti e ai macchinari realizzati dall'azienda.   laposizione, in particolare, dovrà:   pianificare gli interventi tecnici sul campo (e.g. installazione, start up, commissioning, validazioni, training) degli impianti e dei macchinari presso i clienti, valutando le risorse interne ed esterne necessarie per effettuare l'intervento (e.g. collaudatori, montatori, meccanici) in accordo con il technical training manager; coordinare, dialogando con il project manager e le altre funzioni tecniche aziendali, gli interventi preventivi e/o risolutivi per sbloccare eventuali situazioni critiche presso i clienti sorte durante le fasi di installazione e commissioning; predisporre la documentazione tecnica e le procedure necessarie al personale tecnico per eseguire, completare e documentare l'avvenuta validazione, accettazione e consegna delle macchine ai clienti; presenziare e, in caso di necessità, condurre direttamente le attività di installazione e di consegna (hand over) al cliente di macchine e di impianti per scopi formativi del personale tecnico presente; collaborare con il technical training manager nell'aggiornamento della mappatura delle competenze del personale tecnico interno e dei distributori locali per monitorare lo stato delle capacità sul campo; raccogliere i feedback e i suggerimenti dei clienti al fine di migliorare e ottimizzare le attività di collaudo ed installazione dei prodotti.   si richiedono:   diploma come perito tecnico meccanico o affini; esperienza pregressa in ruoli di coordinamento delle attività di installazione/commissioning oppure come validatore/tecnico del commissioning di impianti farmaceutici; conoscenze delle procedure/protocolli di installazione/validazione nel settore farmaceutico; conoscenza degli schemi di processo di macchine e impianti, degli schemi pneumatici ed elettrici e del disegno meccanico; buona conoscenza della lingua inglese; conoscenza del pacchetto office; buone doti di pianificazione e coordinamento delle attività e diu team di lavoro; capacità comunicative, formative, relazionali e forte orientamento al cliente.   si offrono:assunzione a tempo indeterminato in un contesto lavorativo prestigioso e stimolante, trattamento economico di sicuro interesse e ottime prospettive di crescita professionale. sede di lavoro: provincia di varese. gli interessati sono pregati di inviare un dettagliato curriculum vitae contenente un recapito telefonico all'indirizzo e-mail: [*vedi modalità di candidatura*] citando il riferimentosmiv/19hl.   clicca sul link sottostante "sito web" per inviarci la tua candidatura.

Would you like to work for a progressive and ambitious company which is also one of the most successful within the UK construction and infrastructure industry? Broadhaven Construction Ltd. is an innovative and dynamic construction company based in Edgware, Greater London. We carry out design, engineering, property builds/maintenance and installation works across London, southern England and throughout the UK. Job brief: Broadhaven Construction is looking to hire an experienced Design and Technical professional, one who fully appreciates the importance of such role in the overall design and delivery process of any project. A professional who recognizes the fact that his/her work and leadership will directly impact the success of a project and who's ultimately willing do all that is necessary to exceed a client's expectations. Job Description: *Lead the engineering team and collaborate with other departmental heads to ensure the risks below ground are identified and managed. *Develop and maintain working relationships with consultants and get 'buy-in' to the business objective *Manage the technical design process to ensure the best possible drainage, levels and foundation solutions are delivered in terms of best practice and value. *Value engineer designs where possible to help the business maintain a competitive edge. *Liaise with business development and estimating teams to discuss new tender information and formulate a win strategy. *Review tender information, carry out feasibility studies and highlight key constraints on potential new sites. *Help Produce detailed technical viability reports on potential new sites that cover areas such as drainage, foundations, services, ground conditions (geotechnical) and land negotiations *Assist in land acquisition by reviewing planning decisions, planning reports, legal agreements and providing feedback/collated information accordingly. *Review initial scheme design compliance to site specific constraints, opportunities and outline approved planning information. *Promote and act in accordance with Group values, systems, policies and procedures. Qualifications: *Experience within a Technical department of either a housing developer or contractor. *You will have experience of dealing with stakeholders from within Commercial, Operations and Land. *You will also demonstrate good management skills with consultants. *You will be able to demonstrate a mix of both Architectural and Engineering experience. * Have experience in a similar role, or as an Architectural Technician within Building and Construction * Have exposure to residential house building projects * Be able to review plans/housing layouts and pull out potential issues and costing *Strong IT skills in the use of CAD, Excel, Word, Photoshop *Strong written report writing skills *Strong communication skills with the ability to build effective working relationships both internally and externally. There is an attractive remuneration package on offer for the right candidate not forgetting to mention outstanding career progression. If you share our value of doing what you say you will, to the best of your ability, every time, we want to hear from you.

Alfa Academy, Agenzia per il lavoro accreditata dalla Regione Campania, ricerca e seleziona per azienda cliente leader nel settore dell’Informatica un SENIOR IT ENGINEER – TECHNICAL PROJECT MANAGER Per la gestione ed il supporto del reparto assistenza tecnica clienti. Il Candidato ideale ha maturato almeno 2 anni di esperienza in ruolo analogo e si occuperà, su indicazioni del Direttore Amministrativo, di: - Amministrazione e configurazione degli apparati di rete e delle soluzioni di connettività (VPN): - Amministrazione data center con Hypervisors Vmware/XenServer; - Amministrazione di Active Directory e Server Windows, DBMS MsSQL PostgreSQL - Responsabile Disaster Recovery, Business Continuity - Responsabile tecnico progetti interni ed esterni; - Responsabile infrastruttura IT dell'azienda; - Responsabile reparto assistenza tecnica clienti; - Ricerca e sviluppo CyberSecurity, Networking e Virtualizzazione. Requisiti essenziali: - Laurea ingegneria Informatica; - Ottima conoscenza Microsoft Windows Server 2019-2016 - 2012 R2 – 2008 R2: domain implementation, installation,configuration, patching, Active Directory, DNS, DHCP, Certification Authority, Group Policy Object, Network Load Balancing, WSUS, Print Server, File Server, DFS, Failover Cluster, Powershell, troubleshooting; - Microsoft System Center Configuration Manager: design and implementation, patching, software updates, automatic deployment rules, software deployment/ inventory, hardware inventory, reporting, query local user, deploy system image, task sequence, operating system deploy - VMware vSphere (ESXi 6- vCenter Server): installazione, configurazione, patching, virtual machine,virtual switch, cluster (HA - DRS); - Microsoft Office 365: gestione dei servizi; - Veeam: virtual machine backup policy, restore; - Checkpoint / Fortinet o PaloAlto: firewall rule; - Cisco switch; - Citrix: XenServer 7.2 o superiore; - Ottima conoscenza Network e Security: Firewall,Routing, VPN,

Would you like to work for a progressive and ambitious company which is also one of the most successful within the UK construction and infrastructure industry? Broadhaven Construction Ltd. is an innovative and dynamic construction company based in Edgware, Greater London. We carry out design, engineering, property builds/maintenance and installation works across London, southern England and throughout the UK. Job brief: We have a fantastic opportunity within our Construction business for an ambitious, talented and committed Site Manager. Someone with enough drive to get the job done on time, and within budget but also someone who understands that smaller projects are dynamic and can evolve as the development progresses. A competent and flexible individual, who is adept at dealing with issues directly and head on. The right candidate will be both willing and able to help steer the business as we move forward, submitting your own ideas and contributing your own experience to the management mix. The successful candidate will be joining the existing team of passionate and dedicated managers. Experience of working on Educational, Healthcare, Leisure, Defence, Housing, Industrials, Transport and Utilities schemes between £1 and £25 million is an advantage. Job Description: *Plan and organize all labour on site, including Sub Contractors. *Quality Control. *Ensure all resources are used efficiently on site. *Setting out and facilitating work for all direct and indirect labour. *Maintaining high safety standards. *Keeping site records and registers up to date. *Keep records and maintain electronic filing system. *Check and authorize time sheets for direct labour. *Ensure the site is a safe and tidy place to work and visit. *Manage and reduce waste. Qualifications Essential: *A Construction or Civil Engineering related degree *Management experience in the construction industry *Competent in Health and Safety practice *A member of the CIOB, ICE or CEng. *A good knowledge of technical aspects of building and construction *Computer literate including use of Word, Excel, PowerPoint and Email *Good verbal and written communication skills *Management of Budget Compilation *Good analytical & problem solving skills *Ability to work on own initiative. There is an attractive remuneration package on offer for the right candidate not forgetting to mention outstanding career progression. If you share our value of doing what you say you will, to the best of your ability, every time, we want to hear from you.

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Mantova – Bologna – Reggio Emilia The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - FERRARA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona CENTO - FERRARA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINI

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - LUCCA - TOSCANA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona LUCCA - TOSCANA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

Smartercom Italy seeks specialists in Tuscany for its imortant client, telecommunications equipment vendor. For the technological update of the new Wind3 network, we are looking for a specialist in permits. Below is a description of the job and the skills required. Responsibilities: 1. Management of mobile network permit, including project Permit planning covering all aspects for MW, LTE and SWAP installation, commissioning and integration, E2E progress control of Permit filing and Permit obtaining, quality assurance 2. Knowledge of the legislation that regulates the presentation of a permit package at PP.AA (Municipality and ARPA) 3. Knowledge of Safety Relations (AIE) and the authorization procedures for a new base stations or their upgrades (LTE) 4. Monitoring of the progress of the practices for obtaining permits 5. Management of any refusal by the Public Administrations and the new presentations in order to obtain permission to install 6. Coordinate between local partner's project organizations (Suppliers) and the customer 7. Provide regular internal and external progress reports and presentation 8. Perform other activities, accordingly to professional competences, on direct manager request Qualification & Requirements: 1. Degree/diploma in telecommunications or business related discipline 2. A minimum of 3 years experience in Permit obtaining and delivering a mass deployment of Mobile network 3. Technical background covering the installation, commissioning and integration tasks for mobile products 4. Demonstrated subcontractor management experience 5. Ability to work in an intercultural environment 6. Fluent English (verbal and written) 7. Willingness to travel frequently The place of work is Florence Candidates of both sexes interested in this job can send their CV to selezioni@smartercom.it indicating in the object the code PRM-0319F.

Smartercom Italy seeks specialists in Turin for its imortant client, telecommunications equipment vendor. For the technological update of the new Wind3 network, we are looking for a specialist in permits. Below is a description of the job and the skills required. Responsibilities: 1. Management of mobile network permit, including project Permit planning covering all aspects for MW, LTE and SWAP installation, commissioning and integration, E2E progress control of Permit filing and Permit obtaining, quality assurance 2. Knowledge of the legislation that regulates the presentation of a permit package at PP.AA (Municipality and ARPA) 3. Knowledge of Safety Relations (AIE) and the authorization procedures for a new base stations or their upgrades (LTE) 4. Monitoring of the progress of the practices for obtaining permits 5. Management of any refusal by the Public Administrations and the new presentations in order to obtain permission to install 6. Coordinate between local partner's project organizations (Suppliers) and the customer 7. Provide regular internal and external progress reports and presentation 8. Perform other activities, accordingly to professional competences, on direct manager request Qualification & Requirements: 1. Degree/diploma in telecommunications or business related discipline 2. A minimum of 3 years experience in Permit obtaining and delivering a mass deployment of Mobile network 3. Technical background covering the installation, commissioning and integration tasks for mobile products 4. Demonstrated subcontractor management experience 5. Ability to work in an intercultural environment 6. Fluent English (verbal and written) 7. Willingness to travel frequently The place of work is Turin Candidates of both sexes interested in this job can send their CV to selezioni@smartercom.it indicating in the object the code PRM-0319T.

Smartercom Italia, azienda specializzata in ambito TLC e consulenza ICT, per ampliamento gruppi di lavoro presso propri clienti di Torino, ricerca Site Engineer & Civil work per nuovi siti di impianti di TLC. Il candidato ideale è in possesso di adeguato titolo di studio ed ha maturato almeno 3 anni di esperienza nell’ambito richiesto, in realtà complesse e dinamiche. Qualification & Requirements: • Site survey to define the technical site specification; • Identify and evaluate the major constraint like site access, power connection and telecom connection • Manage the itemized (Computo metrico); • Evaluate, identify and propose the simplest solution in terms of time – cost – quality; • Topography check; • Managing parts of construction projects; • Monitoring the material delivery; • Overseeing building work; • Undertaking surveys; • Checking technical designs and drawings to ensure the compliance with Detailed Design; • Liaising with clients, subcontractors and other professional staff, especially quantity surveyors and the overall project manager; • Providing technical advice and solving problems on site; • Ensuring that health and safety and sustainability policies and legislation are adhered to; • Telecom Installation knowledge; • Manage energy supplier, survey, check work of predisposition; • Check document acceptance for civil works and telecom installations; • Proficient in English. Sede di lavoro: Torino I candidati di entrambi i sessi interessati ed in possesso dei requisiti elencati, possono proporre la propria candidatura inviando il proprio CV e citando nell'oggetto il riferimento “SEN-0618-TO”.

MUST - ONE YEAR AS PROJECT MANAGER EXCELLENT opportunity to be mentored by Expert for a year - someone with a strong desire to go into a Project Manager role - plastics as it relates to medical products, global firm. Knowledge of Injection Molded micro components is helpful. is responsible for planning and driving each project to its successful conclusion by ensuring that its scope is well defined, and resource estimates and project schedules are specified and appropriate to the project. The Program Manager organizes and leads activities to ensure completion of the projects on schedule, within budget constraints, and quality that exceeds customers expectations. Requirements: Education, Experience 4 year Engineering Degree or equivalent experience. Experience in the areas of project management, preferably in the medical device field working with minimally invasive, single use medical devices in the endoscopy, cardiovascular, neurovascular, and urology markets. Ideally project management experience in the product or process development of plastic components. Ability to apply engineering principles to an idea or set of user requirements -- and then convert this into design requirements, considering manufacturability, cost of goods, and the regulatory requirements for a device or combination product. Good understanding of Design for Manufacturability principals. Knowledge of product development process according to FDA regulations Proficient with Microsoft Project and very proficient in Microsoft Office products. Experience in building complex schedules utilizing sub-schedule integration structure and logic Experienced with and efficient at capturing and recording technical details and commitments Experienced with and effective in communicating program challenges to appropriate team members Experienced with communicating resource conflicts and effective conflict resolutions Experienced utilizing resource management tools Experienced with complex multi-tasking in leading projects and programs Ability to communicate vertically and horizontally through multiple channels, leverage customer contact network to motivate diverse teams, and enable cross-functional collaboration. Preferably have completed a professional program management training program. Experienced with process verification and validation Authoritative command of complexity and ambiguity, ability to see the big picture, ability to collect, digest and assemble information to enable relevant business analyses and influence decision-making. Continuous improvement methodologies (e.g. Six Sigma, lean manufacturing, etc.) and change management methodologies. Experienced with managing programs with annual budgets of $10K - $5M. Responsibilities: Roles, Tasks Perform Project and program management at a high level of professionalism. This role will be responsible to lead high-profile projects and programs that utilize internal and external personnel, contract firms, and partners. Negotiate and resolve project conflicts and drive consensus among team/functional members to accomplish project and business goals. Manage program resources to meet business objectives. Manages external contractors and suppliers to ensure completion of projects on time and on budget. Manages resource allocations from all areas for project support. Documents labor resources and billing hours. Identifies and manages the resolution of any deviations to contract, Project Master, or project documents. Communicates to clients as required on project updates. Communicates regularly to company management on project schedule, budget and any issues that may affect the completion on projects on schedule and on budget. Negotiates any necessary changes with Customers/Clients. Ensure that Customer/Client issues are resolved and documented to their satisfaction. Support new business activities by evaluating new opportunities, assisting on developing quotes and providing product prototypes if requested.