Plc field technician engineer

SEID srl, an industrial automation company close to Clusone (BG) in the field of automation applied to Oil & Gas sector, is looking for a PLC field engineer for the commissioning of machines and / or plants. The period of activity abroad may vary from a few days up to 4-5 weeks per single journey; the typical destinations are Middle Eastern countries, Russia and Asian countries. The overall availability to work abroad - required on an annual basis - is around 6-8 months / year. The selected candidate will be placed in the Service division where there are already many technicians who regularly travel. During work periods at the company headquarters, the new engineer will be carry out the functional tests of the electrical panels, in anticipation of the subsequent on-site commissioning activity; The ideal candidate has the following requirements: • knowledge of PLC programming elements, with preference for PLC Siemens and/or Rockwell; • knowledge of electrical diagnostic tools such as multimeter and current generator; knowledge of field instruments is welcome, such as temperature / pressure / flow transmitters, with Hart protocol; • flexibility and good manual skills accompanied by problem solving attitude; • diploma of technical institute or degree with electrotechnical / electronic / IT specialization or equivalent; • willingness to travel for a total of 6-8 months / year, not continuous, in the terms specified above; • Good knowledge of the English language. A second language is also welcome, in particular Russian. Company headquarters: close to Clusone (BG) If you think to be the right candidate, please send us your curriculum, with authorization for personal data treatment.

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Mantova – Bologna – Reggio Emilia The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - FERRARA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona CENTO - FERRARA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINI

Knet HR is a leading Recruitment Consulting Company that operates at a National and International level with specific divisions: - Head Hunting division - Temporary Management Division - Top Manager division - Middle Management Division - Professional Studies Division Our company, authorized to operate by the Italian Ministry of Labor, does not administer personnel, therefore the employment relationship is directly regulated between the client company / firm and our candidate. FIELD TECHNICIAN – ITALIAN PLANTS WATER TREATMENT - LUCCA - TOSCANA Report to: GM Europe Purpose of the role: the purpose of the Field Technician is to support the commercial operations department to implement the activities associated with project execution, delivery and customer support post project completion. This should be completed to a high standard in line with contractual obligations and with a focus on customer satisfaction. The role is based in Northern Italy and the focus will be on assisting local Italian clients. In addition to this, some travel may be required to other European countries to provide installation and service support. Key Responsibilities and Accountabilities • Ensure projects are installed and delivered on time in accordance with Company Standards and with a focus on customer satisfaction • Inquisitive mind, able to troubleshoot and diagnose problems. Able to think proactively about how to resolve/mitigate any potential issues during product installation, commissioning and support. • Documentation of all key data required for gate/meter selection, product installation and commissioning as agreed/signed by customer and/or engineering firm Technical Skills · Willingness to perform aspects of masonry work subsequent to proper training · Able to understand engineering data and plans/drawings · Mechanical and electrical skills as pertaining to but not limited to: o Assembly and disassembly of product o Replacement, programming and support of RTU, instrumentation, solar power systems and motor drives o Replacement of gearboxes o Steel cable tensioning and replacement IT Knowledge · Ability and experience with PLC, SCADA and RTU systems as it pertains to but not limited to: · Data table adjustment/entry · Knowledge of I/O as it pertains to floating point registers and digital points · Communication protocol knowledge Other Skills/Knowledge · Basic understanding of electronics · Knowledge of the agricultural irrigation industry · Occupational health and safety · Knowledge of control theory is beneficial · Strong customer service skills Language Skills: fluent in Italian and strong in English; other languages are beneficial (Spanish, French, Romanian, Arabic) Skills and Qualifications: technical trade qualification; valid driving licence; 2 + years of experience Attribute: Demonstrated effective matrix skills (crosses geography’s and departments) Demonstrated ability to work with all stakeholders (internal/external) Results oriented, motivated, reliable and trustworthy working style Excellent interpersonal skills. Able to communicate with ease at different levels and with people in different locations Excellent written and verbal communication skills Business minded, logical, analytical, good strategist and implementer Well organized, quick thinker Able to work independently and as part of a team Employment type · Full-time · Permanent contract · Salary will be discussed with the selected candidate · Benefits: Company car, PC, mobile phone, company credit card, tools, etc Starting date expected: mid January 2021 Location: Zona LUCCA - TOSCANA The selection is open at both sexes of Art. 1 L. 903/77 Maximum confidentiality is guaranteed KNET HUMAN RESOURCES SRL: AUTORIZZAZIONE MINISTERIALE A TEMPO INDETERMINATO Prot. 39/0003074 / MA004.A003

Wyser è la società internazionale di Gi Group che si occupa di ricerca e selezione di middle e senior management specializzato. Facciamo parte di Gi Group, una delle principali realtà a livello internazionale nei servizi dedicati allo sviluppo del mercato del lavoro. Ricerchiamo, per prestigioso cliente, primaria realtà del settore filling, un/una:                  FIELD SERVICE ENGINEER SETTORE FILLING – MACCHINE PER RIEMPIMENTO  Il candidato, interfacciandosi con il proprio responsabile, si occuperà di: - attività di commissioning, installazione, supervisione e attività di training sulle macchine - Eseguire attività di service, retrofitting, manutenzione predittiva ed evolutiva sulle macchine, scrivendo appropriati report al Project Manager di riferimento Requisiti: - Laurea Specialistica in Ingegneria elettronica, dell’automazione e/o diploma ad indirizzo tecnico • 4-5 anni in ruoli di Field Service Engineer maturata nel settore del filling (macchine per il riempimento) • Buona conoscenza del PLC, possibilmente Siemens e/o Rockwell, oppure RS Logix 5000 • Ottime capacità di troubleshooting sulla parte elettrica e meccanica • Disponibilità a viaggiare per circa un 75/85 % del tempo complessivo.  • Buona conoscenza della lingua inglese  • Capacità di lavorare in autonomia e forte spirito di problem solving e di iniziativa • Flessibilità, duttilità, capacità di lavorare in autonomia ma all’occorrenza anche in team, completano le caratteristiche ideali del profilo ricercato. Orario di lavoro Full-Time Sede di lavoro: Parma I candidati ambosessi (D.lgs n. 198/2006) sono invitati a leggere l’informativa privacy ai sensi degli artt. 13 e 14 del Reg. EU 679/2016 al seguente indirizzo: https://it.wyser-search.com/privacy-candidati/ Wyser (Aut. Min. del 15/04/2014 Prot. N: 39/4903) miojob-internal-cv

Cerchiamo, per multinazionale attiva nel settore elettromeccanico, un Field Service Engineer. Il candidato, inserito nel post vendita, svolgerà le seguenti mansioni: installazione, testing, integrazione ed ottimizzazione degli impianti; supporto, da remoto, ai clienti; formazione agli utenti finali; supporto ai commerciali ed al project management; gestione dei report; controllo dei costi. Il candidato dovrà recarsi presso i clienti in Italia, generalmente, dal lunedì al venerdì. Egli seguirà corsi di aggiornamento in Germania. Si richiedono: esperienza nella posizione; conoscenza dei componenti elettrici di impianti automatizzati; conoscenza del plc, buona conoscenza della lingua inglese; disponibilità alle trasferte Italia. Pari opportunità: E' garantita parità di trattamento per uomini e donne, età, nazionalità, opinioni e quanto altro previsto dalle normative vigenti in tema di pari opportunità - Informazioni privacy: Il trattamento dei dati personali pervenuti si svolgerà in conformità alla legge 196/03 - Autorizzazione ministeriale: AUT MIN 1236-SG 2004 sez 1

Cerchiamo, per multinazionale attiva nel settore elettromeccanico, un Field Service Engineer. Il candidato, inserito nel post vendita, svolgerà le seguenti mansioni: installazione, testing, integrazione ed ottimizzazione degli impianti; supporto, da remoto, ai clienti; formazione agli utenti finali; supporto ai commerciali ed al project management; gestione dei report; controllo dei costi. Il candidato dovrà recarsi presso i clienti in Italia, generalmente, dal lunedì al venerdì. Egli seguirà corsi di aggiornamento in Germania. Si richiedono: esperienza nella posizione; conoscenza dei componenti elettrici di impianti automatizzati; conoscenza del plc, buona conoscenza della lingua inglese; disponibilità alle trasferte Italia. data offerta: Pari opportunità: E' garantita parità di trattamento per uomini e donne, età, nazionalità, opinioni e quanto altro previsto dalle normative vigenti in tema di pari opportunità - Informazioni privacy: Il trattamento dei dati personali pervenuti si svolgerà in conformità alla legge 196/03 - Autorizzazione ministeriale: AUT MIN 1236-SG 2004 sez 1

Space Work seleziona AUTOMATION FIELD SERVICE ENGINEER per azienda specializzata nella costruzione e ingegnerizzazione di impianti industriali DESCRIZIONE DELL’ATTIVITA’: La Persona verrà inserita all’interno del reparto Service, si dovrà occupare della programmazione e dello sviluppo dei software per l’automazione industriale. Avrà la responsabilità di fornire assistenza nella fase di installazione e post vendita degli impianti. Assisterà il cliente nella fase di installazione impianti e di post vendita dalla sede o in trasferta presso il cliente. Si occuperà di effettuare la messa in servizio e i test di collaudo degli impianti in azienda prima della spedizione, seguirà il primo avviamento degli impianti. Effettuerà interventi di risoluzione problemi presso il cliente. REQUISITI RICHIESTI: Formazione tecnica e precedente esperienza di almeno 5 anni nella programmazione PLC Siemens e/o Rockwell. Buona conoscenza della lingua inglese e disponibilità a trasferte all’estero per circa il 70% del tempo. L’AZIENDA OFFRE: Contratto di assunzione e retribuzione commisurata all’esperienza. SEDE DI LAVORO: Provincia di Brescia Referente della selezione: Dott.ssa Francesca Bonari L' offerta di lavoro qui pubblicata si rivolge a candidati di entrambi i sessi ai sensi della legge (D.Lgs. 198/2006)

Space Work seleziona MECHANICAL FIELD SERVICE ENGINEER per azienda specializzata nella costruzione e ingegnerizzazione di impianti industriali. DESCRIZIONE DELL’ATTIVITA’: La Persona verrà inserita all’interno del reparto Service, per la messa in servizio al primo avviamento. Si occuperà inoltre di effettuare operazioni di manutenzione ordinaria e straordinaria presso il cliente ed interverrà nella risoluzione di problemi meccanici. Gestirà le segnalazioni delle non conformità e dei reclami, occupandosi di effettuare azioni correttive e di miglioramento. Fornirà supporto alla manutenzione e/o sostituzione di componenti elettrici, aggiornando l’ufficio service sull’avanzamento dell’operazione. REQUISITI RICHIESTI: Formazione tecnica, elettrica o meccanica, e pregressa esperienza nel ruolo. Buona conoscenza del processo tecnologico e dell’impiantistica nonché padronanza degli strumenti che consentono di intervenire sull’impianto (strumentazione, PLC, etc). Buona conoscenza della lingua inglese. Flessibilità e disponibilità ad effettuare trasferte all’estero per più del 70% del tempo. L’AZIENDA OFFRE: Contratto di assunzione e retribuzione commisurata all’esperienza. SEDE DI LAVORO: Provincia di Brescia Referente della selezione: Dott.ssa Francesca Bonari L' offerta di lavoro qui pubblicata si rivolge a candidati di entrambi i sessi ai sensi della legge (D.Lgs. 198/2006)

Responsible for the installation, service and maintenance of GPI machinery in constumer facilities. The incumbent is a key member of the Technical Service team and oartners with our converting and sales teams to meet the needs of the customers. Key Responsibilities: Conducts top-level troubleshooting, diagnosis and repair of electrical, mechanical and controls related problems on machines installed at customer locations, including overhauls and field upgrades as necessaryParticipates in the development, processing and follow up of specifications during machinery tests, debugging and start up, as well as, during the development and field testing of new carton designsDevelops and maintains productive working relationships with customers and acts professionally and proactively to resolve equipment, cartons or service-related issuesAs the technical expert, partners with sales and converting manufacturing individuals and teams to resolve customer issues, as well as, support new business opportunities and product development projectsApplies continuous improvement concepts and techniques to increase equipment productivity. Participates in process improvement and cost reduction initiatives.Effectively utilizes IT systems (in-house and standard applications)Maintains skill base necessary and consistent with machinery and carton technologyProvides instruction and training to customers' staff on safety, operations, machinery maintenance and proper carton handling proceduresPrepares service reports, modified schematics, standard operating procedures and carton specification updates to support field initiatives and changesReports on progress of projects / assignments to all internal and external stakeholdersConducts audits, evaluations and assessment of machine systems / performance resultsLiaises with other companies / OEM's working on common projects This is a summary of the key responsibilities of this position. The Company reserves the right to require the role-holder to undertake such additional tasks or duties as may be within their capabilities and abide by all reasonable rules and instruction given by the Company. Qualifications and Experience Important Graphic Packaging Holding Company Good career opportunityMain Skills:Higher level of English reading, writing and speaking skills4 or more years of related experience and/or formal training in equipment maintenance, repair and troubleshooting. Knowledge of packaging or similar equipment is advantageousTechnical training with graduation or education of industrial or mechanical engineeringDemonstrated ability to ready electrical, mechanical engineering PLC and operator interface knowledgeWorking knowledge of continuous improvement methods, i.e. Six Sigma methodologyMust be prepared to travel if required on short notice. Working hours are flexible to meet Customer demands. Some shift / out of hours working will be required as necessary.Full clean driving license Key CompetenciesEffective communicator, both orally and written, with internal and external customersSuccessfully identifies root causes and resolves problems and issuesDevelops positive customer relationships through customer-focused mindset, build trustIs a team player, works well with others inside and outside the organizationIs a self-starter, has initiative, can effectively work independently with minimal direct supervisionEffectively manages time, plans, projects and related tasksFlexible approach to ensure timely and professional service to support customer and the internal manufacturing processContinuously meet targets and objectives, accountable for results Important Graphic Packaging Holding Company.Ottima opportunità di carriera.

USA International Group is looking for New Italian Branch the Application Engineer computer vision provides technical expertise and consultative services to support the sale and implementation of products into machine vision systems for Integrators, OEM's and End Users. The AE conducts customer consultations, pre-sales feasibility studies, product field trials, training and on-site post-delivery support. The AE works with Integrators, OEM's and End Users in a consultative manner to determine the feasibility and fit of company for their applications. The AE works closely with Application Engineering Management and Product Management to ensure alignment of customer applications with product direction. Essential Functions: Conducts customer consultations. Produces Site Visit Reports for each customer visited. Performs a gap analysis on potential applications. Creates prototype and demo applications. Recommends third party hardware for complete solutions where needed. Performs application testing on customer supplied images. Follows the life cycle of paid services from quoting, execution, customer acceptance through invoicing. Supports tradeshows. Provides customer training. Provides application development services.Develops a broad knowledge of company products and their use in machine vision applications. Provides product feedback to Application Engineering Management and Product Management. Timely and accurate expense reporting and trip documentation. Knowledge, Skills and Abilities: Good presentation, communication, organizational and interpersonal skills. Ability to handle challenging customer situations. Good analytical and problem solving skills. Good understanding of mechanical, electrical and industrial automation systems. Working knowledge and ease with using computing devices running Linux, Windows and/or OS X. Ability to work independently as well as in a collaborative environment. Ability to travel up to 50% of the time, occasionally on short notice. Minimum education and work experience required: B.S. degree, preferably in Computer Science, Electrical Engineering or Mechanical Engineering or equivalent occupational experience. Programming experience using JavaScript - C, C++ or other high level programming language is an advantage. Knowledge of optics and/or lighting for machine vision applications. Knowledge of basic machine vision techniques and industrial / factory automation applications. 2-5 years' experience in related Sales Support functions. Working knowledge of PLC's and/or robots and/or automation systems is desirable. Home office. Salary up to 60k, mbo, full car and beneift

Wyser è la società internazionale di Gi Group che si occupa di ricerca e selezione di middle e senior management specializzato. Facciamo parte di Gi Group, una delle principali realtà a livello internazionale nei servizi dedicati allo sviluppo del mercato del lavoro. Ricerchiamo, per prestigioso cliente, primaria realtà del settore filling, un/una: CUSTOMER CARE AND SERVICE COORDINATOR Il candidato, interfacciandosi con il proprio responsabile, si occuperà di: - Gestire come supporto effettivo di primo contatto (mail o telefono) il cliente - Gestisce e registra i claims del cliente e effettua attività di supporto tecnico. - Indirizza internamente le attività all’area funzionalmente più corretta - Effettua un attività di monitoring e di follow up sulle attività di manutenzione preventiva - Aggiorna le attività di Field utilizzando MS Project come tool - Gestirà un team di 3 persone sotto la sua diretta responsabilità Requisiti: - Laurea Specialistica in Ingegneria elettronica, dell’automazione e/o diploma ad indirizzo tecnico • 3-5 anni in ruoli di Field Service Engineer maturata nel settore del filling (macchine per il riempimento), oppure 2-3 anni come Customer Service Coordinator • Buona conoscenza del PLC, possibilmente Siemens e/o Rockwell, oppure RS Logix 5000 • Ottime capacità di troubleshooting sulla parte elettrica e meccanica • Forte orientamento e sensibilità verso il cliente • Buona conoscenza della lingua inglese • Gradita, ma non determinante, la conoscenza di Ms Project • Capacità di lavorare in team e forte spirito di problem solving e di iniziativa • Flessibilità, duttilità, completano le caratteristiche ideali del profilo ricercato. Orario di lavoro Full-Time Sede di lavoro: Parma I candidati ambosessi (D.lgs n. 198/2006) sono invitati a leggere l’informativa privacy ai sensi degli artt. 13 e 14 del Reg. EU 679/2016 al seguente indirizzo: https://it.wyser-search.com/privacy-candidati/ Wyser (Aut. Min. del 15/04/2014 Prot. N: 39/4903) miojob-internal-cv

La Risorsa Umana.it Srl divisione Interim ricerca per azienda operante nell'automazione industriale SCADA-IT Field Engineer per contratto iniziale in somministrazione a scopo inserimento. La figura ricercata si occuperà, riportando al Responsabile Tecnico, di: - gestire lo sviluppo e l'integrazione di applicazioni SCADA, PLC, HMI per macchine/impianti automatici ed il successivo collaudo/commissioning/avviamento presso il cliente finale; - seguire i progetti delle soluzioni, elevando i livelli di qualità e di standardizzazione di tutta la parte di controllo delle macchine sulla base degli obiettivi di prestazione e cost-saving concordati con la direzione. Il ruolo prevede un contatto costante con le funzioni interne coinvolte nello sviluppo dei prodotti/servizi e/o di project management. Tra i requisiti richiesti: - Laurea triennale/magistrale in Informatica o Ingegneria Informatica o Automazione e Robotica (esperienza equivalente nello stesso ruolo può sostituire la laurea); - Esperienza con la programmazione e la configurazione di pacchetti software SCADA, piattaforme PLC, protocolli OPC DA e UA; - Esperienza con i sistemi operativi Microsoft, MS SQL Server DB, VB Script e linguaggio di programmazione VB.NET; - Esperienza nella progettazione ed integrazione reti Ethernet/Profinet; - Esperienza nella configurazione di reti VPN e VLAN; - Gradita conoscenza delle piattaforme PLC/HMI Rockwell Automation e Siemens; - Conoscenza della lingua inglese (livello intermedio); - Disponibilità a lavorare in trasferta per almeno 90 giorni all'anno; - Predisposizione ai contatti interpersonali e a lavorare in team; - Residenza preferibilmente situata entro un raggio di 30 km dalla sede di lavoro. Luogo di lavoro: Lucca La Risorsa Umana.it, studio specializzato in ricerca e selezione del personale offre, con la propria pluriennale esperienza, un servizio di consulenza e inserimento professionale mirato, rivolto a specialisti e professionisti di diversi settori, offre