-
loading
Solo con l'immagine

Cooling support


Elenco delle migliori vendite cooling support

SUPPORT BARRE LED 4X4 SUPPORT BARRE LED 4X4 SUPPORT BARRE LED 4X4 STAFFA DI MONTAGGIO FARI LED BRAKET BARRA LED LUMINOSA A LED STAFFA SUPPORTO FARETTI SUPPLEMENTARI MOTO SUPPORTO PER BARRA LED DA 52
  • [Alta qualità] ---il LED della barra di supporto è realizzato con materiali metallici di alta qualità, con elevata resistenza, elevata durezza, forte resistenza agli urti, resistenza agli urti, resistenza al calore e resistenza alla corrosione ed è durevole. per support barre led 4x4 adatto per support barre led 4x4
  • [Alta qualità] ---il LED della barra di supporto è realizzato con materiali metallici di alta qualità, con elevata resistenza, elevata durezza, forte resistenza agli urti, resistenza agli urti, resistenza al calore e resistenza alla corrosione ed è durevole. per support barre led 4x4 adatto per support barre led 4x4
  • [Modello applicabile] ---Staffe di montaggio brackett barra led adatto per Ford F250 F350 4WD 2WD 1999-2015. per staffe di montaggio braket barra ledadatto per staffe di montaggio braket barra led
  • [Design stabile] ---La Staffa di Montaggio Fari LED adotta un design robusto.Una volta completato la superficie piana, lo Staffa supporto faretti supplementari moto sarà saldamente afferrato, non solo per proteggere il bull bar dai graffi, ma anche per aggiungere staffe e paraurti. L'attrito tra i due rende l'installazione più sicura. per staffa per barra ledadatto per staffe barra led parabrezza
  • [Dotato di kit di installazione] ---la barra di supporto led 4x4 pare brise è dotata di un kit di installazione, che è comodo e veloce da installare senza alcuna modifica complicata per staffe barra led parabrezzaadatto per staffe barra led parabrezza
  • [Esecuzione squisita] ---Supporto barra led 4x4 staffa di montaggio lampada di alta qualità nuova di zecca, produzione professionale, pregevole fattura, alta affidabilità" per staffe barra led parabrezzaadatto per staffe barra led parabrezza
[Di più]
Vedi prezzi in Amazon
SUPPORT CALZINI DA CICLISMO DA UOMO TECNOLOGIA TRASPIRANTE ANTISCIVOLO ACCESSORI MONOCOLORE UNISEX PER ESCURSIONISMO, ARRAMPICATA, PER ANDARE IN BICICLETTA, GREEN'S 42-44 EU
  • Materiale traspirante: i calzini di Support sono realizzati in materiale delicato e traspirante che manterrà i piedi comodi e asciutti. Per andare in bicicletta e non solo
  • Comodi da indossare: realizzati in fibre di alta qualità che ne mantengono la forma e li fanno aderire perfettamente per tutto il giorno. La tecnologia antiscivolo aiuta a stare comodi durante la corsa o altre attività
  • Multisport: questi calzini da ciclismo unisex ti aiuteranno a ottenere sempre prestazioni ottimali. Che si tratti di corse su strada, giri in mountain bike, spinning in palestra, triathlon o giri in bicicletta in città, i tessuti traspiranti e le zone imbottite anti-vesciche offrono la migliore esperienza in bicicletta
  • Qualità durevole: grazie al tessuto robusto, i nostri calzini non si deteriorano facilmente. Puoi lavare questi calzini a 40°. Non candeggiare, lavare a secco, asciugare in asciugatrice o stirare. Lavare i capi di colore scuro separatamente
  • Vari colori: se ami i calzini in diversi colori, questo prodotto è quello che fa per te. Scegli tra i colori e i motivi della nostra combinazione di colori e motivi. Ottimo regalo per una persona speciale
[Di più]
Vedi prezzi in Amazon
SUPPORT, CALZINI DA CICLISMO DA UOMO, CON TECNOLOGIA TRASPIRANTE, IN FIBRA ANTISCIVOLO, UNISEX, CON MOTIVI DIVERTENTI, UNISEX - ADULTO, IL RAZZO, 8-9 UK / 42-44 EU
  • Materiale traspirante: i calzini di Support sono realizzati in materiale delicato e traspirante che manterrà i piedi comodi e asciutti. Per andare in bicicletta e non solo
  • Comodi da indossare: realizzati in fibre di alta qualità che ne mantengono la forma e li fanno aderire perfettamente per tutto il giorno. La tecnologia antiscivolo aiuta a stare comodi durante la corsa o altre attività
  • Multisport: questi calzini da ciclismo unisex ti aiuteranno a ottenere sempre prestazioni ottimali. Che si tratti di corse su strada, giri in mountain bike, spinning in palestra, triathlon o giri in bicicletta in città, i tessuti traspiranti e le zone imbottite anti-vesciche offrono la migliore esperienza in bicicletta
  • Qualità durevole: grazie al tessuto robusto, i nostri calzini non si deteriorano facilmente. Puoi lavare questi calzini a 40°. Non candeggiare, lavare a secco, asciugare in asciugatrice o stirare. Lavare i capi di colore scuro separatamente
  • Vari colori: se ami i calzini in diversi colori, questo prodotto è quello che fa per te. Scegli tra i colori e i motivi della nostra combinazione di colori e motivi. Ottimo regalo per una persona speciale
[Di più]
Vedi prezzi in Amazon
Italia (Tutte le città)
Pannelli a mesh quasi-filtrante: Un design a rete composto da oltre 57.000 fori da 1,5 mm lavorati con precisione aumenta il flusso d'aria e offre un'interessante visione dei componenti all'interno della struttura. Ottimizzato per il raffreddamento: Con il supporto per radiatori da 280 e 360 mm e fino a sei ventole, l'AP201 è pronto ad affrontare l'assalto termico di hardware ad alte prestazioni. Motherboard Support Micro-ATX Mini-ITX Drive Bays 1 x 2.5" Bay 3 x 2.5"/3.5" Combo Bay Expansion Slots 4 Front I/O Port 1 x Headphone 1 x Microphone 2 x USB 3.2 Gen1 1 x USB 3.2 Gen2 Type C Radiator Support (Top) 120 mm 140 mm 240 mm 280 mm 360 mm Radiator Support (Rear) 120 mm Cooling Support (Top) 3 x 120 mm 2 x 140 mm Cooling Support (Rear) 1 x 120 mm Pre-installed Fans (Front) None Pre-installed Fans (Rear) 1 x 120 mm Maximum CPU Cooler Height 170 mm Maximum GPU Length 338 mm Maximum PSU Length 140-180 mm Removable Dust Filters Bottom Maximum Cable Management Space 32 mm Dimensions 205 x 350 x 460 mm Weight 5.8 Kg
Vista prodotto
Italia (Tutte le città)
Case Size Mid Tower Motherboard Support ATX Micro-ATX Mini-ITX Drive Bays 4 x 2.5"/3.5" Combo Bay Expansion Slots 8 3 (additional vertical) Front I/O Port 1 x headphone / Microphone 2 x USB 3.2 Gen1 1 x USB 3.2 Gen2 Type C LED Control Button Tempered Glass Front Side Left Side Radiator Support (Top) 120 mm 140 mm 240 mm 280 mm 360 mm Radiator Support (Rear) 120 mm Cooling Support (Top) 3 x 120 mm 2 x 140 mm Cooling Support (Rear) 1 x 120 mm Maximum CPU Cooler Height 163 mm Maximum GPU Length 400 mm Maximum PSU Length 200 mm Removable Dust Filters Top Bottom Right Dimensions 285 x 450 x 446 mm Weight 11Kg
Vista prodotto
Italia (Tutte le città)
Dimensions 621 x 285 x 644 mm (DWH) Form Factor Mid Tower Materials Aluminum Mainboard Support E-ATX(Up to 12"x11"), ATX, Micro-ATX, ITX Front Access b'&' Controls USB3.0 x 2, MIC/AUDIO(HD), Power, Type-C USB3.1 Side Panel 4 mm Tempered glass (Both sides) Expansion b'&' Drive Bays Expansion Slots 7 3.5" 1 2.5" 1 Cooling Support Front 3x120mm Top 3x120mm Radiator Support Front ≤ 360mm Top ≤ 360mm Clearance MB Tray Clearance ≤ 37mm Max GPU Length ≤ 450mmb'/xc2/xa0' Max CPU Cooler Height ≤ 215mm PSU Support ATXb'/xc2/xa0'
Vista prodotto
Italia (Tutte le città)
Dimensioni 250 x 565 x 591 (WxDxH) Case Size ATX Mid Tower Dimensioni Scheda ATX/micro ATX/Mini ITX/EATX (12”x10.9”) Drive Bays 2 x Int x 2.5”/3.5” Combo Bay 4 x Int x 2.5” Bay System Fan Support Pre-installed Fans Front: 3 x 140mm Rear: 1 x 140mm Slot di Espansione 8+2 (additional vertical) Peso N.W. 18 kg Colore Black Porte I/O Pannello Frontale 1 x USB 3.1 Gen 2 (Type-C) 4 x USB 3.1 Gen 1 1 x Headphone 1 x Microphone LED & Fan Control Buttons Potenza ATX Note Cooling Support Front: 3 x 140mm/ 3 x 120mm (Radiator + Fan Thickness: Max. 90mm) Top: 2 x 140mm/ 3 x 120mm (Radiator + Fan Thickness: Max. 60mm) Rear: 1 x 140mm/120mm Radiator Support Front: 120, 140, 240, 280, 360, 420 mm Top 120, 140, 240, 280, 360 mm Rear: 120, 140mm Maximum GPU Length: 450 mm Maximum CPU Cooler Height: 190 mm Maximum PSU Length: 220 mm Removable Dust Filters: Front: Slide-Out / Top: Slide-Out / Bottom: Slide-Out Cable Routing: Max. 33 mm 3.5”/2.5” Drive Bays: Up to 4pcs (Pre-install 2pcs) 2.5” Drive Bays: Up to 9pcs (Pre-install 4+1pcs)
Vista prodotto
Italia (Tutte le città)
Design ed estetica di alta qualità: realizzato build da esposizione con tre pannelli in vetro temperato, telaio in alluminio spazzolato e illuminazione frontale integrata Aura Sync RGB Facilità di implementazione: cover multifunzione con supporti a bretella per schede grafiche, cover per PSU e un copri cavo posteriore traslucido per una gestione semplificata dei cavi Facile installazione GPU: installa tre schede grafiche con orientamento standard o due verticali per un tocco extra di originalità, utilizzando la staffa in dotazione Pronto per il raffreddamento di fascia alta: supporta una schede madri fino a formato EATX, con spazio per i radiatori anteriori da 420 mm e pompa e serbatoio per il raffreddamento del liquido Avanzato pannello I/O: porta USB-2 Gen 2 Type-C ™, quattro porte USB 3.0, pulsante di controllo dell'illuminazione RGB e pulsante di controllo della velocità della ventola Comode maniglie da trasporto: trasporta facilmente la tua preziosa build grazie ai manici ergonomici realizzati in tessuto. Dimensioni 250 x 565 x 591 (WxDxH) Case Size ATX Mid Tower Dimensioni Scheda ATX/micro ATX/Mini ITX/EATX (12”x10.9”) Drive Bays 2 x Int x 2.5”/3.5” Combo Bay 4 x Int x 2.5” Bay System Fan Support Pre-installed Fans Front: 3 x 140mm Rear: 1 x 140mm Slot di Espansione 8+2 (additional vertical) Peso N.W. 18 kg Colore Black Porte I/O Pannello Frontale 1 x USB 3.1 Gen 2 (Type-C) 4 x USB 3.1 Gen 1 1 x Headphone 1 x Microphone LED & Fan Control Buttons Potenza ATX Note Cooling Support Front: 3 x 140mm/ 3 x 120mm (Radiator + Fan Thickness: Max. 90mm) Top: 2 x 140mm/ 3 x 120mm (Radiator + Fan Thickness: Max. 60mm) Rear: 1 x 140mm/120mm Radiator Support Front: 120, 140, 240, 280, 360, 420 mm Top 120, 140, 240, 280, 360 mm Rear: 120, 140mm Maximum GPU Length: 450 mm Maximum CPU Cooler Height: 190 mm Maximum PSU Length: 220 mm Removable Dust Filters: Front: Slide-Out / Top: Slide-Out / Bottom: Slide-Out Cable Routing: Max. 33 mm 3.5”/2.5” Drive Bays: Up to 4pcs (Pre-install 2pcs) 2.5” Drive Bays: Up to 9pcs (Pre-install 4+1pcs)
Vista prodotto
Italia
FeaturesCompatibility tested across X99 and 100 Series motherboards for reliably fast performancePart of our exhaustive testing process includes performance and compatibility testing on most every X99 and 100 Series motherboard on the market ? and a few that aren?t.Designed for high-performance overclockingEach Vengeance LPX module is built from an eight-layer PCB and highly-screened memory ICs. The efficient heat spreader provides effective cooling to improve overclocking potential.Pure aluminum heat spreader for faster heat dissipation and cooler operationOverclocking overhead is limited by operating temperature. The unique design of the Vengeance LPX heat spreader optimally pulls heat away from the ICs and into your system?s cooling path, so you can push it harder.The heat spreader doesn?t just allow Vengeance LPX to run better? the aggressive yet refined form factor looks great in showcase systems.XMP 2.0 support for trouble-free, automatic overclockingManually pushing your DRAM frequency can be a fun experiment, but sometimes you just want to get maximum performance without the hassle.Intel X99 and 100 Series-based motherboards support the new XMP 2.0 standard, and Vengeance LPX DRAM does, too. Turn it on, and it will automatically adjust to the fastest safe speed for your Vengeance LPX kit. You?ll get amazing, reliable performance without lockups or other strange behavior.Low-profile design fits in smaller spacesWhen the first Mini-ITX and Micro ATX motherboards for DDR4 are released, Vengeance LPX will be ready. The small form factor makes it ideal for smaller cases or any system where internal space is at a premium.SCHEDA TECNICAMemoriaLatenza CAS 13RAM installata 16GBTipo di RAM DDR4Velocit? memoria 2133MHzComponente per PC/serverVoltaggio della memoria 1.2VData Integrity Check (verifica integrit? dati) NoLayout di memoria (moduli x dimensione) 2 x 8GBFattore di forma memoria 288-pin DIMMSenza buffer SiSPD profile SiDesignTipo di raffreddamento HeatsinkColore del prodotto Red Marca: Corsair
173,19 €
Vista prodotto
Italia (Tutte le città)
Chassis Material: b'/xc2/xa0'Premium Grade (6063) All Aluminium, 4mm Thick Extruded Panels Color: b'/xc2/xa0'Silver – Sandblast Finish Motherboard Support: b'/xc2/xa0'Mini-ITX and Micro-ATX Hard Drive Capacity: b'/xc2/xa0'Minimum 1 x 3.5″ + 2 x 2.5″, Maximum 3 x 3.5″ + 3 x 2.5″* 1 Expansion Slot: b'/xc2/xa0'3 x Low Profile Expansion Slots (Max Length 156mm) USB Ports: b'/xc2/xa0'2 x USB3.0, Left & Right Side, 19/20 PIN Cooling: b'/xc2/xa0'Heatpipe Direct Touch 4 Pipes – Recommended CPU TDP 65W, Max TDP 95W* 2 External Dimensions: b'/xc2/xa0'348 x 289 x 100mm (W x D x H, 109mm including feet) Internal Dimensions: b'/xc2/xa0'288 x 280 x 93mm (W x D x H) Power Supply: b'/xc2/xa0'ZF240 or Nano Series PSU (Not Included) Remote Control: b'/xc2/xa0'FLirc or IRRC Solutions (not Included) Net Weight: b'/xc2/xa0'4.4KG * 1 b'/xc2/xa0'Depending on hardware configuration, i.e. motherboard size * 2 b'/xc2/xa0'As with any passive cooling solution, environmental conditions will have an impact on the performance. A TDP of 95W is only recommended when the chassis is placed in a location with adequate air flow and moderate ambient room temperature
Vista prodotto
Italia (Tutte le città)
Chassis Material: b'/xc2/xa0'Premium Grade (6063) All Aluminium, 4mm Thick Extruded Panels Colour: b'/xc2/xa0'Black – Sandblast Finish Motherboard Support: b'/xc2/xa0'Mini-ITX Drive Capacity: b'/xc2/xa0'Maximum 5 x 3.5″ or 12 x 2.5″ * 1 Optical Drive Bays: b'/xc2/xa0'Optical Kit for slim slot loading drive Expansion Slot: b'/xc2/xa0'2 x Full Height Slots (MAX 200mm Length, 116mm Height* 2) USB Ports: b'/xc2/xa0'2 x USB3.0, Bottom Facing Cooling: b'/xc2/xa0'4 x 6mm Heatpipes with 65W / Side Panel, Expandable to 110W* 3 b'/xc2/xa0' External Dimensions: b'/xc2/xa0'260 x 260 x 270mm (W x D x H) Power Supply: b'/xc2/xa0'ZF240 or Nano Series PSU (Not Included) Remote Control: b'/xc2/xa0'None Net Weight: b'/xc2/xa0'7.5KG * 1 b'/xc2/xa0'Multiple combinations of both * 2 b'/xc2/xa0'Pay attention to the AUX Power Connector orientation on the graphics card as this could increase the total height above the 116mm limit. * 3 b'/xc2/xa0'Additionalb'/xc2/xa0'LH6 heatpipesb'/xc2/xa0'required. As with any passive cooling solution, environmental conditions will have an impact on the performance. A location with adequate air flow and moderate ambient room temperature is required.
Vista prodotto
Italia (Tutte le città)
Chassis Material:b'/xc2/xa0'Premium Grade (6063) All Aluminium, 4mm Thick Extruded Panels Available Colours: Black – Sandblast Finish Motherboard Support:b'/xc2/xa0'Mini-ITX, Micro-ATX and Full Size ATX Drive Capacity:b'/xc2/xa0'Minimum 2 x 3.5″ + 3 x 2.5″, Maximum 5 x 3.5″ + 4 x 2.5″* Expansion Slot:b'/xc2/xa0'2 x Full Height Slots (300mm Upper, 190mm Lower Slot, Flexible Riser Required) USB Ports:b'/xc2/xa0'2 x USB3.0, Left b'&' Right Side, 19/20 PIN Cooling:b'/xc2/xa0'Heatpipe Direct Touch 4 Pipes – Recommended CPU TDP 65W, Max TDP 95W** Dimension:b'/xc2/xa0'435 x 319 x 100mm (W x D x H) Power Supply:b'/xc2/xa0'ZF240 or Nano Series PSU (Not Included) Remote Control:b'/xc2/xa0'FLirc or IRRC Solutions (Not Included) Net Weight:b'/xc2/xa0'5.4KG *Depending on hardware configuration, i.e. motherboard size **As with any passive cooling solution, environmental conditions will have an impact on the performance. A TDP of 95W is only recommended when the chassis is placed in a location with adequate air flow and moderate ambient room temperature
Vista prodotto
Italia
MSI GT72 2QE-892IT Dominator Pro Dragon Edition, GTX980M , 17,3 Pollici, Edizione Limitata Performante notebook gaming con LCD FullHD da 17,3 pollici con GTX 980M, SSD 256 GB + HD 1 TB, i7 4720HQ e SuperPack Dati Tecnici: Colore: Nero / Grigio / Rosso Materiale: Plastica / Alluminio Componenti: Chipset: Intel Shark Bay HM87 CPU: Intel Core i7-4720HQ GPU: NVIDIA GeForce GTX 980M, 8Gb GDDR5 Memorie: 2x 8 GB DDR3 SO-DIMM (2x Slot, max. 16 GB) HDD: 2x SSD 128 Gb SATA 3 M.2 1x 1Tb 2,5 pollici SATA 3 1.200 rpm SO: Windows 8.1 64 Bit Tastiera: Steelseries Custom RGB Display: Dimensione: 17,3 Pollici Full HD Risoluzione: 1.920 x 1.080 Pixel Formato: 16:9 Connessioni: 1x HDMI 1.4b 1x Gigabit-LAN (RJ45, Killer E2200) 3x USB 3.0 2x Audio (In / Out) Alimentazione: 6 Celle Alimentatore: 19 V, 120 Watt Features: Bluetooth v 4.0 Cardreader (SD, SDHC, SDXC) Webcam (HD, 720p) GT72 2QE DOMINATOR PRO - Windows 8.1 - The 4th generation Intel® Core™ i7 Processor - 17.3 Full HD (1920x1080) anti-glare LCD in LED backlight - Enthusiast level NVIDIA® GeForce GTX 980M 8G discrete graphics card provides great performance and ultra image quality - The whole new feature SHIFT brings you total control over the system’s balance between performance and temperature. - Exclusive Super RAID 3 with 4 SSD RAID0 gives over 1600MB/s reading speed! (option) - Cooler Boost 3: Higher efficiency dual cooling system. - Killer Double Shot Pro (Killer Gb LAN + Killer 802.11 a/c WiFi) with Smart Teaming - Audio Boost 2 with 3 independent amp for best sound experience - Evolution of Sound by Dynaudio 2.1 sound system - SteelSeries Engine to customize every key and devices for personalizing your play style - XSplit Gamecaster for easily recording gaming moments, broadcasting and sharing live gameplay sessions to Twitch, YouTube, UStream and more - Keyboard by SteelSeries with full color LED back light and solid feedback - Matrix display support max 4 displays to expand the vision for extreme gaming experience or multi tasks Specifiche: Codice Prodotto GT72 2QE-892IT Schermo 17.3 Full HD IPS (1920x1080) , Anti-glare Processore Intel Core i7-4720HQ Chipset Intel HM87 Memoria 16 GB (2x8GB) DDR3 1600 MHz Storage Super Raid-256GB SSD (M.2 SATA)+1TB (SATA) 7200rpm Scheda Video nVidia Geforce GTX 980M 8GB GDDR5 Unità Ottica BD Writer (9.5mm) Audio e multimedia Sound by Dynaudio 2.1 channel with 1 Woofer Support 7.1 channel SPDIF output Exclusive Audio Boost 2 technology Creative Sound Blaster Cinema 2 Connettività Killer DoubleShot Pro Gb LAN Killer DoubleShot Pro 11ac Bluetooth 4.0 Porte 1 x Cuffie 1 x Microfono 1 x Line-in 1 x Line-out 6 x USB 3.0 2 x Mini-DisplayPort v1.2 1 x HDMI v1.4 1 x SD card reader Webcam FHD type (30fps@1080p) Sistema operativo e software a corredo Windows 8.1 Altre Caratteristiche Tastiera retroilluminata SteelSeries Batteria 9-Cell Lithium Ion (83wHr) Accessori in dotazione Alimentatore 230W Dragon Mousepad Dragon Military Dog Tag Keyboard skin Steelseries Kinzu V2 Red Gaming Mouse Steelseries Siberia V2 Gaming Headset Zaino Dimensioni 428(W) x 294(D) x 48(H)mm Peso 3.78 Kg (batteria inclusa)
799 €
Vista prodotto
Bergamo (Lombardia)
Vendo mainboard Gigabyte Serie K7 Triton con CPU AMD Sempron 2400+ e dissipatore e 1GB di ram DDR400 (2 x 512MB). Testata e funzionante, nessun condensatore danneggiato. Mascherina posteriore inclusa. In regalo usb Wi-Fi TP-Link WN725N. Presenti le scatole originali, manuale di istruzioni e cd driver. NB: si tratta di componenti a 32 bit, non è supportato alcun OS a 64 bit, così come sistemi operativi Windows successivi a Seven 32 bit. Nessun problema con Linux, o Nas4free. Non presenti porte sata, è comunque installabile una scheda PCI con sata aggiuntivi. Prezzo non trattabile, riferito allo scambio a mano e pagamento in contanti. In caso di invio postale, pagamento anticipato e costo di spedizione a carico dell'acquirente. Disponibile dopo acquisto al montaggio sul vostro PC. Astenersi affaristi e perditempo. Grazie. GA-7S748-L SiS® 748 Chipset Processore Socket A AMD Athlon(TM) XP / Athlon(TM) / Duron(TM) Chipset North Bridge: SiS 748 South Bridge: SiS963L MuTIOL® Media I/O Realtek 8201 LAN PHY Realtek ALC 655 AC'97 Codec Front Side Bus 400 / 333 / 266 / 200 MHz FSB Memoria DDR 400 (PC3200) / DDR 333 (PC2700) / DDR 266 (PC2100) 184pin 3 x DIMM slots 3GB max Slot di Espansione 5 x PCI slots (PCI 2.2 compliant) 1 x AGP slot (8x/4x-AGP 3.0 compliant), supports 1.5v display card only Connettori Interni I/O 1 x Game/Midi 2 x cooling fan pin header 1 x FDD 1 x USB 2.0 (2 ports by cable) 2 x UDMA ATA 133/100/66 Bus Master IDE Pannello Posteriore I/O 2 x COM 1 x RJ45 LAN 1 x LPT PS/2 (Keyboard/Mouse) 3 x Jack Audio (Entrata/Uscita/Microfono) 4 x USB 2.0 Monitoraggio H/W Support auto temperature detect and thermal shutdown function H/W detect and report Power-in voltage, CPU voltage and Fan speed Caratteristiche Fisiche ATX, 305mm x 200mm Driver SiS USB 2.0 driver Realtek audio driver SiS 748 chipset driver SiS LAN driver
Vista prodotto
Italia (Tutte le città)
New Bitmain Antminer S9 14 Th/s With Apw3 Power Supply New Bitmain BTC Antminer S9 13.5TH / s Bitcoin Mining Rig w / APW3 PSU Specifications: 1. Hash Rate: 14TH/s ±5% 2. Power Consumption: 1375W + 7% (at the wall, with APW3,93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.098 J/GH + 7%(at the wall, with APW3 93% efficiency, 25°C ambient temp) 4. Rated Voltage: 11.60 ~13.00V 5. Chip quantity per unit: 189x BM1387 6. Dimensions: 350mm(L)*135mm(W)*158mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 °C to 40 °C 9. Network Connection: Ethernet 10. Default Frequency: 650M 100% Guaranteed Fast shipping 100% Guaranteed After-Sales support 100% Guaranteed Genuine/Authentic Product 100% Guaranteed Factory warranty (International) For more details on how to buy contact us below WhatsApp or Viber: +16319609052 Thanks for your Attention.
Vista prodotto
Torino (Piemonte)
Acquistata tempo addietro ma mai utilizzata, quindi nuova imballata, completa di cavi e CD di installazione. Sui siti web di Gigabyte e di nVidia sono disponibili i drivers piu’ recenti per Window 10 - 32 o 64 bit. Lower GPU Temperature Ultra Durable VGA board provides dramatic cooling effect on lowering both GPU and memory temperature by doubling the copper inner layer of PCB. Better Overclocking Capability Ultra Durable VGA board reduces voltage ripples in normal and transient state, thus effectively lowers noises and ensures higher overclocking capability. Decrease Power Switching Loss Ultra Durable VGA board allows more bandwidth for electron passage and reduces circuit impedance. The less circuit impedance, the more stable flow of current and can effectively improve power efficiency. Up to 4 displays on a Single Card Support up to four displays on a single card. Satisfy your multi-screen setup, high definition and extreme gaming experience. Specifiche: •Graphics Processing: GeForce GTX 760 •I/O: DVI-I*1 - DVI-D*1 - DisplayPort*1 - HDMI*1 •Core Clock: Base / Boost clock:1085 / 1150 MHz •Process Technology: 28 nm •Memory Clock: 6008 MHz •Memory Size: 2048 MB •Memory Type: GDDR5 •Memory Bus: 256 bit •Card Bus: PCI-E 3.0 •Digital max resolution: 4096 X 2160 (via a single HDMI connector and not supported with two DVI connectors) •Multi-view: 4 •Card size: L=295mm W=129mm H=43mm •PCB Form: ATX •DirectX: 12 •OpenGL: 4.4 •Recommended PSU: 500W (with one 6-pin and one 8-pin external power connectors) •Analog max resolution: 2048 x 1536
99 €
Vista prodotto
Roma (Lazio)
Pari al nuovo, unico proprietario. Completo di confezione e di ogni suo accessorio. No HDD inclusi. TS-212 è un centro di archiviazione in rete potente ma facile da usare per backup, sincronizzazione, accesso remoto e intrattenimento domestico. In qualità di cloud personale, sarai sempre connesso ai tuoi file ei tuoi file saranno sempre sotto il tuo controllo. TS-212 con QTS 4.0 può rendere la tua vita digitale più facile, più semplice e più conveniente. qnap. com/en/product/ts-212 CPU: Marvell 6281 1.2GHz DRAM: 256MB DDRII RAM Flash Memory: 16MB HDD: 2 x 3.5" SATA I/II hard disk drive (HDD) NOTE: 1. The system is shipped without hard disk drives. LAN Port: 1 x Gigabit RJ-45 Ethernet port LED Indicators: USB, Status, HDD1, HDD2, LAN,Power USB: 3 x USB 2.0 port (front: 1; back: 2) Support USB printer, pen drive, USB hub, and USB UPS etc. Dimensions: 165.5 (H) x 85 (W) x 218.4 (D) mm 6.52 (H) x 3.35 (W) x 8.60(D) inch Weight: Net weight (NAS only): 0.91 kg/ 2.01 lb Power Consumption (W) Sleep mode: 6W, In operation: 13W (with 2 x 500GB HDD installed) Fan: 1 x quiet cooling fan (6cm, 12V DC)
160 €
Vista prodotto
Arezzo (Toscana)
Caratteristiche prese dalla casa produttrice: PRODUCT NAME I/O PORTS DRIVER BAYS CASE EXPANSION SLOTS MAXIMUM GPU LENGTH MAXIMUM CPU COOLER LENGTH LIGHTING POWER SUPPLY COOLING LAYOUT PRE-INSTALL FAN RADIATOR LAYOUT FORM FACTOR SUPPORT MB FORM FACTOR DIMENSION WEIGHT MAG VAMPIRIC 100R USB 3.2 Gen 1 Type A x 1 USB 2.0 x2 Audio x1 Mic x1 2.5” x 2 + 3.5” x 2 (1 x compatible with 2.5”) 7 300mm / 11.81 inch 160mm / 6.3 inch ARGB Standard ATX, max up to 270mm (without 3.5'' HDD case installed) Front: 120mm x 3 or 140mm x 2 Top: 120mm x 2 Rear: 120mm x 1 Front: 120mm system fan x 1 Rear: 120mm ARGB fan x 1 Front: 120 / 240mm Rear: 120mm Mid-Tower ATX / Micro-ATX / Mini-ITX 390 (D) x 205 (W) x 457 (H) mm / 15.35 (D) x 8.07 (W) x 17.99 (H) inches 4.7Kg / 10.36lbs ZenGamerX.it - P.IVA: 02401640517 Prezzo di 70 Comprensivo di Spese di spedizione.
70 €
Vista prodotto
Italia
Scheda Video ZOTAC Nvidia GeForce GT 1030 2GB GDDR5 Specifications GPU: GeForce® GT 1030 CUDA cores: 384 Video Memory: 2GB GDDR5 Memory Bus: 64-bit Engine Clock: Base 1227 MHz - Boost 1468 MHz Memory Clock: 6.0 GHz PCI Express: PCIE 3.0 Display Outputs DVI-D HDMI 2.0b HDCP Support: Yes Multi Display Capability: 2 Recommended Power Supply: 300W Power Consumption: 30W Power Input: N/A DirectX: 12 OpenGL: 4.5 Cooling: Heatsink + fan Slot Size: Single Slot SLI: N/A Supported OS: Windows 10 / 8 / 7 (32/64-bit) Card Length: 172.5mm x 111.15mm x 16mm (6.79in x 4.38in x 0.63in) Accessories: Driver Disk, Quick Install Guide
157,36 €
Vista prodotto
Italia (Tutte le città)
Il Kolink Satellite è un chassis a forma di cubo con un'impressionante quantità di spazio per i componenti, tra cui schede grafiche fino a 280 mm, alimentatori fino a 220 mm (140 mm con scheda grafica di oltre 190 mm) e persino schede madri Micro-ATX fino a 22,6 cm x 18 cm. Il pannello I/O anteriore è dotato di 2 porte USB 3.0 per trasferimenti ad alta velocità e vi è spazio interno per più unità di archiviazione per soddisfare le vostre esigenze. b'/xc2/xa0' Kolink Satellite vuole offrire caratteristiche impressionanti in dimensioni ridotte ad un prezzo competitivo.b'/xc2/xa0' b'/xc2/xa0' Caratteristiche b'/xc2/xa0' - 2 porte USB 3.0 sul pannello frontale - Supporto scheda madre Mini-ITX (fino a 22,6 x 18 cm) - Supporto per schede grafiche fino a 280 mm di lunghezza - Dimensioni compatte - Spazio per gli HDD: 2 x 3,5" + 2 x 2,5" o 3 x 3,5" o 4 x 2,5". - Interno nero con ventola da 120 mm preinstallata sul retro Case Material: 0.5mm Steel/Plastic Power Supply Orientation:b'/xc2/xa0' Front Motherboard Support: Micro-ATX (Up to 22.6cm x 18cm)/Mini-ITX Internal 3.5" Bays: 3 (dependant on configuration) Internal 2.5" Bays: 4 (dependant on configuration) Expansion Slots: b'/xc2/xa0'2 Front Ports:b'/xc2/xa0' 2 x USB3.0 (with USB2.0 convertor), HD-Audio x 1, Mic x 1 Cooling System:b'/xc2/xa0' Rear - 1 x 120mm (included) Dimensions:b'/xc2/xa0' 260 x 190 x 328mm Clearance: VGA - 280mm, CPU Cooler 165mm, PSU - 220mm (with VGA card under 190mm), 140mm (with VGA card over 190mm)
Vista prodotto
Italia (Tutte le città)
Product Name PAEAN Product Number 0R200062 Dimension [W×D×H] 286×587×417 mm Weight 10.8 kg Material Aluminum 4.0mm; SPCC 1.0mm Color Black; Hair-silk Anodized M/B Support ATX/MICRO ATX/MINI ITX Drive Bay Internal 3.5"×3 [Tool-Free]; Internal 2.5"×3 [Tool-Free] Expansion Slot PCI Slots ×8 I/O Panel USB3.0×4, HD Audio×1 Power Supply PS/2 [Internal Bottom-mount] Cooling System 120/140/240/280/360mm Radiator [Option] CPU Cooler Height 140mm [Max.] Graphic Card Length 310mm [Max.] Side Panel Style 5mm Tempered Glass
Vista prodotto

Pubblicare Annunci Gratuiti - comprare e vendere usato in Italia | CLASF - copyright ©2024 www.clasf.it.