Product development engineer gioielleria

Research and Development Engineering is responsible for developing and implementing new products through adherence to established design control processes and good engineering and documentation practices. ESSENTIAL FUNCTIONS: ? Provide know-how in polymeric materials screening and formulations, perform plastic product evaluations and testing using internal Polymer Lab equipment. ? Perform qualifications of new resins as per internal training, material screening /analysis, materials/product testing, shelf life claims and technical reporting. ? Participate in tasks related to plastic/rubber process machinery selections/requirements and vendor sourcing per instructions and guidance by department head. ? Participate in tasks related to Cost Savings projects, ability to derive true cost calculations, priority assessment and critical path analysis. ? Maintain,manage and organize all project files, binders, data archiving and maintenance of long term 5 year stability reports/files and products on stability. ? Provide technical support/direction to MITG sites as needed with resin events, resin incoming inspection, failure analysis and solutions. ? Provide daily updates to Department Manager on progress, setbacks and solutions to small and large projects. ? Provide support to various plants for molding process optimization, travel to these sites will be required. DEPARTMENT SPECIFIC/NON-ESSENTIAL FUNCTIONS: Other duties as assigned with or without accommodation. MINIMUM REQUIREMENTS: Education: Bachelor of Science in Plastics Engineering (minimum requirement) Masters in Plastics Engineering degree preferred. Experience: ? Individual must have strong polymer material fundamentals and hands-on Injection Molding processing knowhow or /and familiarity, both with full hot runner, valve gated and cold runner high cavitation tools. ? Individual must have hands on experience with simple and complex injection molds, mold setup, familiarity with tool design, venting and cooling capabilities. ? At least 1 year of experience on production floor of an injection molding facility optimizing processes data analysis and product testing /metrology. ? Must have fundamental and sound knowledge in materials such as polypropylene, polyethylene, polyvinyl chloride, polystyrene and thermoset and thermoplastic rubbers. Experience with Characterization /testing methodologies for polymers. ? Familiar with bonding, printing and other assembly techniques in a high volume manufacturing environment. ? At least 1-2 years of Project management and participation with cross-functional teams. Preferred Skills/Qualifications: Strong analytical/statistical problem solving tools Skills/Competencies: Ability to support multiple projects and balance priorities Strong facilitation skills and experience working with cross functional teams Strong knowledge of plastic and rubber processes, with component and assembly manufacturing Possess strong verbal, written, and presentation skills Operates independently in carrying out functions with minimal supervision Applies six sigma concepts, Cpk, sample size selection

MUST - ONE YEAR AS PROJECT MANAGER EXCELLENT opportunity to be mentored by Expert for a year - someone with a strong desire to go into a Project Manager role - plastics as it relates to medical products, global firm. Knowledge of Injection Molded micro components is helpful. is responsible for planning and driving each project to its successful conclusion by ensuring that its scope is well defined, and resource estimates and project schedules are specified and appropriate to the project. The Program Manager organizes and leads activities to ensure completion of the projects on schedule, within budget constraints, and quality that exceeds customers expectations. Requirements: Education, Experience 4 year Engineering Degree or equivalent experience. Experience in the areas of project management, preferably in the medical device field working with minimally invasive, single use medical devices in the endoscopy, cardiovascular, neurovascular, and urology markets. Ideally project management experience in the product or process development of plastic components. Ability to apply engineering principles to an idea or set of user requirements -- and then convert this into design requirements, considering manufacturability, cost of goods, and the regulatory requirements for a device or combination product. Good understanding of Design for Manufacturability principals. Knowledge of product development process according to FDA regulations Proficient with Microsoft Project and very proficient in Microsoft Office products. Experience in building complex schedules utilizing sub-schedule integration structure and logic Experienced with and efficient at capturing and recording technical details and commitments Experienced with and effective in communicating program challenges to appropriate team members Experienced with communicating resource conflicts and effective conflict resolutions Experienced utilizing resource management tools Experienced with complex multi-tasking in leading projects and programs Ability to communicate vertically and horizontally through multiple channels, leverage customer contact network to motivate diverse teams, and enable cross-functional collaboration. Preferably have completed a professional program management training program. Experienced with process verification and validation Authoritative command of complexity and ambiguity, ability to see the big picture, ability to collect, digest and assemble information to enable relevant business analyses and influence decision-making. Continuous improvement methodologies (e.g. Six Sigma, lean manufacturing, etc.) and change management methodologies. Experienced with managing programs with annual budgets of $10K - $5M. Responsibilities: Roles, Tasks Perform Project and program management at a high level of professionalism. This role will be responsible to lead high-profile projects and programs that utilize internal and external personnel, contract firms, and partners. Negotiate and resolve project conflicts and drive consensus among team/functional members to accomplish project and business goals. Manage program resources to meet business objectives. Manages external contractors and suppliers to ensure completion of projects on time and on budget. Manages resource allocations from all areas for project support. Documents labor resources and billing hours. Identifies and manages the resolution of any deviations to contract, Project Master, or project documents. Communicates to clients as required on project updates. Communicates regularly to company management on project schedule, budget and any issues that may affect the completion on projects on schedule and on budget. Negotiates any necessary changes with Customers/Clients. Ensure that Customer/Client issues are resolved and documented to their satisfaction. Support new business activities by evaluating new opportunities, assisting on developing quotes and providing product prototypes if requested.

MAIN RESPONSIBILITIES Supporting project leader in interpreting product design proposals and translating it into the PDS (Product Design Specification) meeting the business plan target cost. Identifying issues & risks to minimize quality and security problems during product development avoiding delay. Operating CAD and other software as applicable. Organising and/or participating in design reviews. Filing documents and data. Applying material tests. Managing simulations with components, product function, physical processes. Support labs in module test specification and system test plan to validate. Understand technical tests results to take decision on design development and final a...

Responsible for the installation, service and maintenance of GPI machinery in constumer facilities. The incumbent is a key member of the Technical Service team and oartners with our converting and sales teams to meet the needs of the customers. Key Responsibilities: Conducts top-level troubleshooting, diagnosis and repair of electrical, mechanical and controls related problems on machines installed at customer locations, including overhauls and field upgrades as necessaryParticipates in the development, processing and follow up of specifications during machinery tests, debugging and start up, as well as, during the development and field testing of new carton designsDevelops and maintains productive working relationships with customers and acts professionally and proactively to resolve equipment, cartons or service-related issuesAs the technical expert, partners with sales and converting manufacturing individuals and teams to resolve customer issues, as well as, support new business opportunities and product development projectsApplies continuous improvement concepts and techniques to increase equipment productivity. Participates in process improvement and cost reduction initiatives.Effectively utilizes IT systems (in-house and standard applications)Maintains skill base necessary and consistent with machinery and carton technologyProvides instruction and training to customers' staff on safety, operations, machinery maintenance and proper carton handling proceduresPrepares service reports, modified schematics, standard operating procedures and carton specification updates to support field initiatives and changesReports on progress of projects / assignments to all internal and external stakeholdersConducts audits, evaluations and assessment of machine systems / performance resultsLiaises with other companies / OEM's working on common projects This is a summary of the key responsibilities of this position. The Company reserves the right to require the role-holder to undertake such additional tasks or duties as may be within their capabilities and abide by all reasonable rules and instruction given by the Company. Qualifications and Experience Important Graphic Packaging Holding Company Good career opportunityMain Skills:Higher level of English reading, writing and speaking skills4 or more years of related experience and/or formal training in equipment maintenance, repair and troubleshooting. Knowledge of packaging or similar equipment is advantageousTechnical training with graduation or education of industrial or mechanical engineeringDemonstrated ability to ready electrical, mechanical engineering PLC and operator interface knowledgeWorking knowledge of continuous improvement methods, i.e. Six Sigma methodologyMust be prepared to travel if required on short notice. Working hours are flexible to meet Customer demands. Some shift / out of hours working will be required as necessary.Full clean driving license Key CompetenciesEffective communicator, both orally and written, with internal and external customersSuccessfully identifies root causes and resolves problems and issuesDevelops positive customer relationships through customer-focused mindset, build trustIs a team player, works well with others inside and outside the organizationIs a self-starter, has initiative, can effectively work independently with minimal direct supervisionEffectively manages time, plans, projects and related tasksFlexible approach to ensure timely and professional service to support customer and the internal manufacturing processContinuously meet targets and objectives, accountable for results Important Graphic Packaging Holding Company.Ottima opportunità di carriera.

The resource, directly responding to the R & D director, will have responsibility for various aspects such as: * Firmware Development, from customer specifications, new projects, software architecture through to product testing. * Transfer of the specifications and tools to the Engineering department. * Maintainance ongoing projects for the production of firmware in accordance with the alloted time. * Preparation of technical documentation for the product. * Promotion and development of ideas, methodologies for optimization and evolution of the products and services of business development. Firmware Engineer Biomedical companyThe ideal candidate is a Firmware Engineer with solid experience in the development of firmware for microcontrollers, DSP, PIC 8/16/32 bit. The following skills are also required: * Excellent knowledge of C in embedded programming field. * Excellent product debugging capabilities and problem solving. * Good knowledge of programming languages such as VB, MFC, C ++, Python, Qt. * Good knowledge of Software Development LifeCycle. * Knowledge of interfaces such as PWM, I2C, SPI, RS232, USB. * Excellent ability to work autonously and to take the lead of a project. * Good knowledge of tools for software configuration. * Basic knowledge of image processing techniques. * Knowledge of laboratory instrumentation. * Availability to travel abroad. The candidate profile is completed by excellent communication and organizational skills, and a good knowledge of written and spoken English. Knowledge of RTOS and object oriented programming methodologies are also a plus. Biomedical companyOttima opportunità di carriera.

Intecs, which was founded in 1974, provides the most innovative software&hardware technology, engineering services and products for dependable safety- and mission-critical electronics systems. Intecs designs and develops applications, tools, software, hardware components and products for Aerospace, Defence, Transportation,Telecommunication and Smart Systems markets in cooperation with major European and Italian Industries, Organizations, Universities and Research Centres. Intecs is an international leader in System Engineering, mastering the whole value chain from Prototypes, Simulators, Automated Test Equipment to the finished product. Intecs employs circa 500 professionals. More than 80% of the staff has an university degree in engineering, computer science or other technical disciplines. Our headquarter is in Rome, while other operational sites are located in Pisa, Naples, Milan, Turin, Genoa. We're looking for SENIOR SW ENGINEER C++/QT We are looking for passionate Qt and C++ experts to work with our customers to help them succeed with their Qt projects. Our consulting engineers provide many services including design, code development, architectural reviews, training and troubleshooting. As a software engineer you would primarily focus on the technology back-bone that drives our software applications and have a major impact on the success of our current and future products. Your qualification: • Have suitable education, e.g. BS or MS in Software Engineering • Excellent C++ programming skills • Have experience with resource-constrained devices in the embedded or mobile space • Know your way around in Linux on desktop and embedded • Experience with Windows and MacOS desktop environments • Good understanding of complex software systems • Software architectural design skills • Are curious and creative by nature • Strong spoken and written communication skill in English • Capability to work with customers to understand their requirements • Can work closely with other parts of the organization, and with the Qt community Perhaps you • have some graphics and OpenGL development experience • have worked with QNX, Yocto, embedded Linux, Android, or iOS • have experience with open source communities and development Why join us: • A chance to work with highly talented embedded software engineers • Ability to contribute to the cutting-edge technology and product • A family friendly, diverse, sociable workplace where learning is valued Site: TORINO

USA International Group is looking for New Italian Branch the Application Engineer computer vision provides technical expertise and consultative services to support the sale and implementation of products into machine vision systems for Integrators, OEM's and End Users. The AE conducts customer consultations, pre-sales feasibility studies, product field trials, training and on-site post-delivery support. The AE works with Integrators, OEM's and End Users in a consultative manner to determine the feasibility and fit of company for their applications. The AE works closely with Application Engineering Management and Product Management to ensure alignment of customer applications with product direction. Essential Functions: Conducts customer consultations. Produces Site Visit Reports for each customer visited. Performs a gap analysis on potential applications. Creates prototype and demo applications. Recommends third party hardware for complete solutions where needed. Performs application testing on customer supplied images. Follows the life cycle of paid services from quoting, execution, customer acceptance through invoicing. Supports tradeshows. Provides customer training. Provides application development services.Develops a broad knowledge of company products and their use in machine vision applications. Provides product feedback to Application Engineering Management and Product Management. Timely and accurate expense reporting and trip documentation. Knowledge, Skills and Abilities: Good presentation, communication, organizational and interpersonal skills. Ability to handle challenging customer situations. Good analytical and problem solving skills. Good understanding of mechanical, electrical and industrial automation systems. Working knowledge and ease with using computing devices running Linux, Windows and/or OS X. Ability to work independently as well as in a collaborative environment. Ability to travel up to 50% of the time, occasionally on short notice. Minimum education and work experience required: B.S. degree, preferably in Computer Science, Electrical Engineering or Mechanical Engineering or equivalent occupational experience. Programming experience using JavaScript - C, C++ or other high level programming language is an advantage. Knowledge of optics and/or lighting for machine vision applications. Knowledge of basic machine vision techniques and industrial / factory automation applications. 2-5 years' experience in related Sales Support functions. Working knowledge of PLC's and/or robots and/or automation systems is desirable. Home office. Salary up to 60k, mbo, full car and beneift

USA International Group is looking for New Italian Branch the Application Engineer computer vision provides technical expertise and consultative services to support the sale and implementation of products into machine vision systems for Integrators, OEM's and End Users. The AE conducts customer consultations, pre-sales feasibility studies, product field trials, training and on-site post-delivery support. The AE works with Integrators, OEM's and End Users in a consultative manner to determine the feasibility and fit of company for their applications. The AE works closely with Application Engineering Management and Product Management to ensure alignment of customer applications with product direction. Essential Functions: Conducts customer consultations. Produces Site Visit Reports for each customer visited. Performs a gap analysis on potential applications. Creates prototype and demo applications. Recommends third party hardware for complete solutions where needed. Performs application testing on customer supplied images. Follows the life cycle of paid services from quoting, execution, customer acceptance through invoicing. Supports tradeshows. Provides customer training. Provides application development services.Develops a broad knowledge of company products and their use in machine vision applications. Provides product feedback to Application Engineering Management and Product Management. Timely and accurate expense reporting and trip documentation. Knowledge, Skills and Abilities: Good presentation, communication, organizational and interpersonal skills. Ability to handle challenging customer situations. Good analytical and problem solving skills. Good understanding of mechanical, electrical and industrial automation systems. Working knowledge and ease with using computing devices running Linux, Windows and/or OS X. Ability to work independently as well as in a collaborative environment. Ability to travel up to 50% of the time, occasionally on short notice.

For an automotive company, we are looking for a Homologation Pre-compliance Engineer. Main Tasks: •Starting from the new product range and contents, define the design guidelines for vehicles and components according to the EU and UNECE regulations in force in the target market at the SOP date •Define the homologation road map for the N1 vehicles in order to support the platform decision in introducing since the SOP date contents that could negatively affect the product life cycle (10 years time) •Define the compliance gaps on the existing vehicles and components and issue the impact and modification list to be submitted to the engineering team •Support the Chief Engineer in monitoring that the design activities are in line whit the issue compliance requirements and gaps •Issue the main frame of the homologation plan in cooperation whit the homologation Manager and the Chief engineer Report to: Chief Engineer Required competences: •Master degree in mechanical engineering (automotive specialization preferred) •Huge and proven experience in automotive industry (light commercial vehicle preferred) gained in complete development programs in OEM projects •Capability in working in autonomy and proactive basis •Capability in working in international team •EU and ENECE regulations knowledge, components and vehicle level •EU and ENECE regulation road map knowledge •Microsoft Office suite for reporting The resource will have to stay minimum 4/6 month in China. Compensation package and contractual level will be in line with candidate’s experience and competencies. Location: Milano / Torino. La Risorsa Umana.it, studio specializzato in ricerca e selezione del personale offre, con la propria pluriennale esperienza, un servizio di consulenza e inserimento professionale mirato, rivolto a specialisti e professionisti di diversi settori, offrendo opportunità lavorative a tempo determinato ed indeterminato. Propone inoltre un servizio di orientamento di bilancio di competenze individuale. I candidati interessati possono inviare il proprio CV a: La Risorsa Umana.it Via Artigiani, 4 – 24060 Brusaporto (BG) Tel. 035/4327100 Fax. 035/200535 E-mail: selezionebergamo@larisorsaumana.it Contatta oggi stesso La Risorsa Umana.it per saperne di più sulle offerte disponibili! Per maggiori informazioni visita il sito www.larisorsaumana.it Autorizzazione Ministero Lavoro per l’attività di Ricerca e Selezione del Personale Prot. n. 1484/RS del 12/08/2005 Il presente annuncio é rivolto ad entrambi i sessi, ai sensi delle leggi 903/77 e 125/91, e a persone di tutte le età e tutte le nazionalità, ai sensi dei decreti legislativi 215/03 e 216/03. I candidati sono invitati ad Inviare il proprio CV e a leggere sul sito www.larisorsaumana.it l’informativa sulla Privacy (art. 13 D.Lgs. 196/2003).

Leader in hydraulic screw and high pressure pumps with innovative proprietary technology. Established in 1978, Settima has a long-standing tradition as manufacturer of hydraulic screw pumps for industrial applications. With 15 international patents, Settima is also the inventor of the no noise high pressure Continuum® helical rotor pump, a proprietary technology which is a game changer both in industrial and mobile applications. The market segments where Settima operates are: industrial equipment, power generation, marine, oil & gas and mobile. The company is situated in the northern part of Italy, with HQ and 3 Production Sites in the Piacenza Area, operations in Asia & USA as well. For the European Sales team we are selecting a young SALES ENGINEER EUROPE – DACH Area German and English Speaking The Candidate will be reporting hierarchically to the Sales Manager Europe. He/She will also have frequent functional interactions with the following functions: • Customer Service team for quotations and orders processing • Sales Support Engineers for the development of specific projects • R&D for new products and applications. The candidate will be part of Settima’s international Sales Team. Her/his primary role and responsibility will be to develop the Company’s sales to the German and other DACH industrial companies in the hydraulic market. She/he will be responsible for the following: • develop the sales of the Company • deal with and manage customers like system producers / integrators and OEM’s • sales budget by market segments, product lines and area of responsibility; • develop and expand relationships with existing Customers; • scout new application opportunities and Customers; • build and manage Client relationships, including contract negotiations; • work as part of the global key accounts sales team to support local key accounts; • report, track and follow-up on contacts and projects using the company support tools; • attend business-specific fairs and exhibitions; • propose and implement market development activities in collaboration with the marketing department; • deal with the technical department for the development of new products and customized solutions. SKILLS Technical competence combined with commercial experience within the field of industrial equipment and installations, preferably hydraulic market; a technical education as engineer. Very fluent German language and English spoken/written at professional proficiency level. Track record in dealing with German and/or other DACH markets is preferential. The candidate we like to meet is experienced and conclusive in negotiations, motivated by success and good results, which she/he achieves through strong team spirit, targeted and committed work and attention to details. Willingness to travel in order to visit existing and potential Customers. Very good knowledge of Office Package and flexible minded, a good communicator and time manager. Company Head Quarter: Piacenza Area Italy INFORMAZIONI PER SEGNALARE LA SUA CANDIDATURA Si prega di creare o aggiornare il Suo Profilo K&P allegando CV aggiornato (possibilmente con foto) e breve Lettera di Presentazione indicando il riferimento “Rif. 181/18 SEE”. Il Profilo K&P è il documento che ci autorizza alla gestione dei dati oltre a permettere una conoscenza piu completa della candidatura. In una prima fase è possibile inviare mail a risorse@kpconsulting.it, successivamente è obbligatorio, completare i dati on line sul sito www.kpconsulting.it. La selezione ha carattere di urgenza, le candidature maggiormente in linea con il profilo ideale saranno contattate entro 2 settimane. Per eventuali ulteriori informazioni, siamo disponibili al Tel. 0522 512067. Si chiede di esplicitare l'autorizzazione al trattamento dei dati personali (D.Lgs196/03). K&P Consulting Srl, iscritta all'Albo delle Agenzie per il Lavoro, Prot. n° 39/0002041, invita i candidati ambosessi (L. 903/77) a leggere l'Infomativa sulla Privacy (art. 13 D.Lgs. 196/2003) sul sito www.kpconsulting.it

Leader in hydraulic screw and high pressure pumps with innovative proprietary technology. Established in 1978, Settima has a long-standing tradition as manufacturer of hydraulic screw pumps for industrial applications. With 15 international patents, Settima is also the inventor of the no noise high pressure Continuum® helical rotor pump, a proprietary technology which is a game changer both in industrial and mobile applications. The market segments where Settima operates are: industrial equipment, power generation, marine, oil & gas and mobile. The company is situated in the northern part of Italy, with HQ and 3 Production Sites in the Piacenza Area, operations in Asia & USA as well. For the European Sales team we are selecting a SALES ENGINEER EUROPE – DACH Area The Candidate will be reporting hierarchically to the Sales Manager Europe. He/She will also have frequent functional interactions with the following functions: • Customer Service team for quotations and orders processing • Sales Support Engineers for the development of specific projects • R&D for new products and applications. The candidate will be part of Settima’s international Sales Team. Her/his primary role and responsibility will be to develop the Company’s sales to the German and other DACH industrial companies in the hydraulic market. She/he will be responsible for the following: • develop the sales of the Company • deal with and manage customers like system producers / integrators and OEM’s • sales budget by market segments, product lines and area of responsibility; • develop and expand relationships with existing Customers; • scout new application opportunities and Customers; • build and manage Client relationships, including contract negotiations; • work as part of the global key accounts sales team to support local key accounts; • report, track and follow-up on contacts and projects using the company support tools; • attend business-specific fairs and exhibitions; • propose and implement market development activities in collaboration with the marketing department; • deal with the technical department for the development of new products and customized solutions. SKILLS Technical competence combined with commercial experience within the field of industrial equipment and installations, preferably hydraulic market; a technical education as engineer. Fluent in English and possibly German, spoken/written at professional level. Track record in dealing with German and/or other DACH markets is preferential. The candidate we like to meet is experienced and conclusive in negotiations, motivated by success and good results, which she/he achieves through strong team spirit, targeted and committed work and attention to details. Willingness to travel in order to visit existing and potential Customers. Very good knowledge of Office Package and flexible minded, a good communicator and time manager. Company Head Quarter: Piacenza Area Italy INFORMAZIONI PER SEGNALARE LA SUA CANDIDATURA Importante** In una prima fase si prega di inviare mail direttamente a risorse@kpconsulting.it, successivamente è obbligatorio, completare i dati on line sul sito www.kpconsulting.it, creando il Suo Profilo K&P allegando CV aggiornato (possibilmente con foto) e breve Lettera di Presentazione indicando il riferimento “Rif. 181/18 SEE”. Il Profilo K&P è il documento che ci autorizza alla gestione dei dati oltre a permettere una conoscenza più completa della candidatura. La selezione ha carattere di urgenza, le candidature maggiormente in linea con il profilo ideale saranno contattate entro 2 settimane. Si chiede di esplicitare l'autorizzazione al trattamento dei dati personali (D.Lgs196/03). K&P Consulting Srl, iscritta all'Albo delle Agenzie per il Lavoro, Prot. n° 39/0002041, invita i candidati ambosessi (L. 903/77) a leggere l'Infomativa sulla Privacy (art. 13 D.Lgs. 196/2003) sul sito www.kpconsulting.it

We are looking for a Test Engineer who ensures that assigned company products (both hardware and software) comply with the expected quality standards and product requirements. He reports to Tester manager. Responsibilities - Participate in requirement analysis in order to guarantee the product testability - Support developers in understanding how to test code and software with the appropriate level of quality. - Be the end responsible of Test plan. - Participate during the development process, with the following tasks: - Creation of manual test scenarios from functional analysis. - Creation of test data needed for tests. - Execution of manual test scenarios. - Reviews on QA related documentation. - Execute eventually mobility test Required skills - A profound knowledge and experience with Quality Assurance and setting up a testing structure - Ability to understand software architecture and the implications that this has on testing - Experience with testing methodology and testing techniques - Experience with testing web based applications - Excellent communication skills and relationship building across multiple business and technical teams - Ability to build knowledge of business requirements and apply it to test scenarios - Strong problem solving and analytical skills - Experience in CAN - Bus and CAN -Bus simulator (Vehicle Spy is a plus) - Knowledge in mobile and/or GPS protocols and technologies - Confidence in writing shell scripting in Unix/Linux systems - Hands on experience with SQL - Fluent English Soft skills The ideal candidate successfully combines your technical knowledge and passion for quality. He/she uses high standards, works pro-actively and is driven by results. He/She is a team player, flexible, persistent, and has a hands-on mentality.

Il nostro cliente è una realtà italiana leader internazionale nel settore metalmeccanico per l’industria ascensoristica, capace di soddisfare la domanda di clienti a livello globale anche in merito a prodotti e servizi annessi. La lunga tradizione in R&D, la solida presenza in tutti i continenti e le partnership internazionali consolidate fanno di questa realtà uno dei più grandi leader assoluti nel settore. La funzione, ben integrata nell’azienda, si rapporta sia con clienti esterni, sia con tutta la struttura aziendale (material management, commerciale, ufficio tecnico, acquisti, logistica, produzione e IT) e segue il processo di vendita da un punto di vista tecnico, occupandosi di analisi di fattibilità e della preventivazione di massima della commessa, in stretto contatto con l’ufficio commerciale e a diretto riporto del Product Engineer Development Manager. Inoltre, la risorsa avrà il compito di seguire e supportare il cliente nelle fasi successive alla chiusura del contratto di fornitura, nel ruolo di interfaccia principale. L’ambiente internazionale ed il contatto con clienti esteri richiedono un’ottima conoscenza della lingua inglese. Sede di lavoro: provincia di Varese; Contratto: a tempo indeterminato; Inquadramento e retribuzione saranno commisurati al potenziale di crescita manageriale espresso e all’esperienza e alle competenze realmente maturate. Requisiti: - Laurea Magistrale in Ingegneria Meccanica o, in alternativa, diploma di perito tecnico con esperienza pregressa; - Conoscenza delle tecnologie meccaniche (tecnologia laser, stampo, waterjet, ecc) di base della lavorazione della lamiera; - Conoscenza del processo di costificazione in relazione al processo produttivo; Esperienza con sistema di gestione ERP; Inglese fluente; Automunito. La ricerca è rivolta a persone di entrambi i sessi. Inviare dettagliato CV in italiano con autorizzazione al trattamento dei dati personali (D.lgs. 196/03) al seguente link: https://jobs.futuremanageralliance.com/job/viewAd.php?job_id=40&jobType=application-proposal-engineer-in-italy--lombardy-provincia-di-varese&companyName=future-manager-recruitment O all’indirizzo: engineering@futuremanager.it con riferimento “Application/Proposal Engineer”

General information Reference number 2018-5156  Job opening category Standard Job details Category OPERATIONS - ENGINEERING/PRODUCTION Job title Software Engineer Embedded - Automotive Job description  AKKA Technologies Italy, the Italian channel of AKKA Technologies Group-counting more than 15.000 employees, 21 centers of excellence with a big footprint in Europe, Asia and America-represents a leading company among the engineering consulting key players. Our highly specialized teams of consultants intervene throughout the entire development lifecycle of a product, a process or an infrastructure. (Aerospace, Automotive, Naval, Defense, Energy, Finance, Life S...

Location: Padua (Padova) Job ID: 28891 Start date: 09.07.2018 Type of employment: Full time Length of contract: Permanent Job description As an Analog Design Engineer you will be responsible for module/block design of Power Management Systems (DCDC-converter, Low Drop Out regulator) including concept development and post layout verification with the focus on automotive Body Power Led Driver Applications. In your new role you will: Develop an understanding of product requirements. Define suitable concepts including Design for Testability. Create circuit schematics. Verify your design by state-of-the-art simulation tools. Act as Layout-support and support of lab-evaluat...